|
|
PDF TC74VHC4040FN Data sheet ( Hoja de datos )
| Número de pieza | TC74VHC4040FN | |
| Descripción | 12-STAGE RIPPLE-CARRY BINARY COUNTER | |
| Fabricantes | Toshiba | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de TC74VHC4040FN (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
TC74VHC4040F/FN/FT/FK
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TC74VHC4040F,TC74VHC4040FN,TC74VHC4040FT,TC74VHC4040FK
12-Stage Ripple Carry Binary Counter
The TC74VHC4040 is an advanced high speed CMOS
12-STAGE BINARY COUNTER/DIVIDER fabricated with silicon
gate C2MOS technology.
It achieves the high speed operation similar to equivalent
Bipolar Schottky TTL while maintaining the CMOS low power
dissipation.
Setting CLR to high resets the counter to low.
A negative transition on the CK input brings one increment
into the counter.
This counter provides all divided output stages, and at Q12, a
1/4096 divided frequency will be output.
An input protection circuit ensures that 0 to 5.5 V can be
applied to the input pins without regard to the supply voltage.
This device can be used to interface 5 V to 3 V systems and two
supply systems such as battery back up. This circuit prevents
device destruction due to mismatched supply and input voltages.
Features
• High speed: fmax = 210 MHz (typ.) at VCC = 5 V
• Low power dissipation: ICC = 4 μA (max) at Ta = 25°C
• High noise immunity: VNIH = VNIL = 28% VCC (min)
• Power down protection is provided on all inputs.
• Balanced propagation delays: tpLH ∼− tpHL
• Wide operating voltage range: VCC (opr) = 2 V to 5.5 V
• Low noise: VOLP = 1.5 V (max)
• Pin and function compatible with 74HC4040
Note: xxxFN (JEDEC SOP) is not available in
Japan.
TC74VHC4040F
TC74VHC4040FN
TC74VHC4040FT
TC74VHC4040FK
Weight
SOP16-P-300-1.27A
SOL16-P-150-1.27
TSSOP16-P-0044-0.65A
VSSOP16-P-0030-0.50
: 0.18 g (typ.)
: 0.13 g (typ.)
: 0.06 g (typ.)
: 0.02 g (typ.)
1 2007-10-01
1 page  
Timing Requirements (input: tr = tf = 3 ns)
Characteristics
Symbol
Minimum pulse width
( CK )
Minimum pulse width
(CLR)
Minimum removal time
tw (L)
tw (H)
tw (H)
trem
TC74VHC4040F/FN/FT/FK
Test Condition
―
―
―
VCC (V)
3.3 ± 0.3
5.0 ± 0.5
3.3 ± 0.3
5.0 ± 0.5
3.3 ± 0.3
5.0 ± 0.5
Ta = 25°C
Typ. Limit
― 5.0
― 5.0
― 5.0
― 5.0
― 5.0
― 5.0
Ta =
−40 to
85°C
Limit
5.0
5.0
5.0
5.0
5.0
5.0
Unit
ns
ns
ns
AC Characteristics (input: tr = tf = 3 ns)
Characteristics
Symbol
Propagation delay
time
( CK -Q1)
Propagation delay
time
(Qn-Qn + 1)
Propagation delay
time
(CLR-Q)
tpLH
tpHL
Δtpd
tpHL
Maximum clock
frequency
Input capacitance
Power dissipation
capacitance
fmax
CIN
CPD
Test Condition
VCC (V) CL (pF)
15
3.3 ± 0.3
50
―
15
5.0 ± 0.5
50
3.3 ± 0.3
50
―
5.0 ± 0.5
50
Ta = 25°C
Min Typ. Max
― 7.5 11.9
― 10.0 15.4
― 4.8 7.3
― 6.3 9.3
― 2.4 4.4
― 1.6 3.1
15 ― 8.3 12.8
3.3 ± 0.3
50 ― 10.8 16.3
―
15 ― 5.6 8.6
5.0 ± 0.5
50 ― 7.1 10.6
15 75 140 ―
3.3 ± 0.3
50 55 80 ―
―
15
150 210
―
5.0 ± 0.5
50 95 125 ―
― ― 4 10
(Note) ― 21 ―
Ta =
−40 to 85°C
Min Max
1.0 14.0
1.0 17.5
1.0 8.5
1.0 10.5
― 5.0
― 3.5
1.0 15.0
1.0 18.5
1.0 10.0
1.0 12.0
75 ―
50 ―
125 ―
80 ―
― 10
――
Unit
ns
ns
ns
MHz
pF
pF
Note: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating
current consumption without load.
Average operating current can be obtained by the equation:
ICC (opr) = CPD·VCC·fIN + ICC
5 2007-10-01
5 Page 
TC74VHC4040F/FN/FT/FK
RESTRICTIONS ON PRODUCT USE
• Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
• Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must
also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document,
the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the “TOSHIBA
Semiconductor Reliability Handbook” and (b) the instructions for the application that Product will be used with or for. Customers are
solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the
appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any
information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other
referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO
LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS.
• Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
11 2007-10-01
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet TC74VHC4040FN.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| TC74VHC4040F | 12-STAGE RIPPLE-CARRY BINARY COUNTER | Toshiba |
| TC74VHC4040FK | 12-STAGE RIPPLE-CARRY BINARY COUNTER | Toshiba |
| TC74VHC4040FN | 12-STAGE RIPPLE-CARRY BINARY COUNTER | Toshiba |
| TC74VHC4040FS | 12-STAGE RIPPLE-CARRY BINARY COUNTER | Toshiba |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |