|
|
Número de pieza | ZMY22 | |
Descripción | Surface mount Silicon-Zener Diodes (non-planar technology) | |
Fabricantes | Diotec Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de ZMY22 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! ZMY 1…ZMY 200 (1.3 W)
Surface mount Silicon-Zener Diodes
(non-planar technology)
Flächendiffundierte Si-Zener-Dioden
für die Oberflächenmontage
Version 2004-05-13
Maximum power dissipation
Maximale Verlustleistung
1.3 W
Nominal Z-voltage – Nominale Z-Spannung
1…200 V
Plastic case MELF
Kunststoffgehäuse MELF
Weight approx. – Gewicht ca.
DO-213AB
0.12 g
Dimensions / Maße in mm
Plastic material has UL classification 94V-0
Gehäusematerial UL94V-0 klassifiziert
Standard packaging taped and reeled
Standard Lieferform gegurtet auf Rolle
see page 18
siehe Seite 18
Standard Zener voltage tolerance is graded to the international E 24 (~5%) standard.
Other voltage tolerances and higher Zener voltages on request.
Die Toleranz der Zener-Spannung ist in der Standard-Ausführung gestuft nach der internationalen
Reihe E 24 (~5%). Andere Toleranzen oder höhere Arbeitsspannungen auf Anfrage.
Advantages of non-planar Zener-Diodes:
Improved clamping capability
Increased max. zener current IZmax
Chips produced with Plasma-EPOS technology
Molded plastic over passivated junction
Vorteile der flächendiffundierten Zener-Dioden:
Hohe Impulsfestigkeit
Hoher max. Arbeitsstrom IZmax
Chips hergestellt in Plasma-EPOS-Technologie
Passivierte Chips im Plastik-Gehäuse
Maximum ratings and Characteristics
Grenz- und Kennwerte
Power dissipation – Verlustleistung
TA = 50°C
Non repetitive peak power dissipation, t < 10 ms
Einmalige Impuls-Verlustleistung, t < 10 ms
TA = 25°C
Operating junction temperature – Sperrschichttemperatur
Storage temperature – Lagerungstemperatur
Thermal resistance junction to ambient air
Wärmewiderstand Sperrschicht – umgebende Luft
Thermal resistance junction to terminal
Wärmewiderstand Sperrschicht – Kontaktfläche
Ptot
PZSM
1.3 W 1)
40 W
Tj – 50...+150°C
TS – 50...+175°C
RthA < 45 K/W 1)
RthT < 10 K/W
1) Mounted on P.C. board with 50 mm2 copper pads at each terminal
Montage auf Leiterplatte mit 50 mm2 Kupferbelag (Lötpad) an jedem Anschluß
2) Tested with pulses – Gemessen mit Impulsen
3) The ZMY 1 is a diode operated in forward. Hence, the index of all parameters should be “F” instead of “Z”.
The cathode, indicated by a white ring is to be connected to the negative pole.
Die ZMY 1 ist eine in Durchlaß betriebene Si-Diode. Daher ist bei allen Kenn- und Grenzwerten der Index
“F” anstatt “Z” zu setzten. Die durch den weißen Ring gekennzeichnete Kathode ist mit dem Minuspol zu verbinden.
210
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet ZMY22.PDF ] |
Número de pieza | Descripción | Fabricantes |
ZMY20 | Magnetic Field Sensors | Zetex Semiconductors |
ZMY20 | Zener Diode ( Rectifier ) | General Semiconductor |
ZMY20 | SILICON PLANAR POWER ZENER DIODES | GOOD-ARK Electronics |
ZMY20 | SILICON PLANAR POWER ZENER DIODES | Semtech Corporation |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |