|
|
Número de pieza | WM2604 | |
Descripción | Quad 10-Bit Serial Input Voltage Output DAC | |
Fabricantes | Wolfson Microelectronics plc | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de WM2604 (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
No Preview Available ! WM2604
Quad 10-Bit Serial Input Voltage Output DAC
Production Data, June 1999, Rev 1.0
FEATURES
• Four 10-bit voltage output DACs
• Dual 2.7V to 5.5V supply (separate digital and analogue
supplies)
• DNL ±0.1 LSB, INL ±0.4 LSB
• Low power consumption:
- 5.5mW, slow mode - 5V supply
- 3.3mW, slow mode - 3V supply
• TMS320, (Q)SPI™, and Microwire™ compatible serial
interface
• Programmable settling time of 4µs or 12µs typical
APPLICATIONS
• Battery powered test instruments
• Digital offset and gain adjustment
• Battery operated/remote industrial controls
• Machine and motion control devices
• Wireless telephone and communication systems
• Speech synthesis
• Arbitrary waveform generation
ORDERING INFORMATION
DEVICE
WM2604CDT
WM2604IDT
TEMP. RANGE
0° to 70°C
-40° to 85°C
PACKAGE
16-pin TSSOP
16-pin TSSOP
DESCRIPTION
The WM2604 is a quadruple 10-bit voltage output, resistor string,
digital-to-analogue converter. Each DAC can be individually
powered down under software control. A hardware controlled mode
is provided that powers down all DACs. Power down reduces
current consumption to 10nA.
The device has been designed to interface efficiently to industry
standard microprocessors and DSPs, including the TMS320
family. The WM2604 is programmed with a 16-bit serial word
comprising of a DAC address, individual DAC control bits and a
10-bit value.
The WM2604 has provision for two supplies: one supply for the
serial interface (DVDD, DGND), and one for the DACs, reference
buffers and output buffers (AVDD, AGND). This enables a typical
application where the device can be controlled via a
microprocessor operating on a 3V supply, with the DACs operating
on a 5V supply. Alternatively, the supplies can be tied together in a
single supply application.
Excellent performance is delivered with a typical DNL of ±0.1 LSB.
The settling time of the DAC is programmable to allow the designer
to optimize speed versus power dissipation. The output stage is
buffered by a x2 gain near rail-to-rail amplifier, which features a
Class AB output stage. DACs A and B can have a different
reference voltage to DACs C and D.
The device is available in a 16-pin TSSOP package. Commercial
temperature (0° to 70°C) and Industrial temperature (-40° to 85°C)
variants are supported.
BLOCK DIAGRAM
REFINAB (15)
REFINCD (10)
DIN (4)
FS (7)
SCLK (5)
NCS (6)
WM2604
16-BIT
SHIFT
REGISTER
AND
CONTROL
LOGIC
data
DAC A
12-BIT
DATA AND
CONTROL
HOLDING
LATCH
AVDD
(16)
DVDD
(1)
REFERENCE
INPUT BUFFER
X1
10-BIT
DAC
LATCH
DAC
OUTPUT
BUFFER
X2
(14) OUTA
2-BIT
CONTROL
LATCH
POWERDOWN/
SPEED
CONTROL
POWER-ON
RESET
(9)
AGND
(8)
DGND
DAC B
DAC C
DAC D
(3)
NLDAC
(2)
NPD
(13) OUTB
(12) OUTC
(11) OUTD
TYPICAL PERFORMANCE
1
AVDD = DVDD =5V, VREF = 2.048V, Speed = Fast mode, Load = 10k/100pF
0.8
0.6
0.4
0.2
0
-0.2
-0.4
-0.6
-0.8
-1
0 256 512 767
CODE
1023
WOLFSON MICROELECTRONICS LTD
Lutton Court, Bernard Terrace, Edinburgh, EH8 9NX, UK
Tel: +44 (0) 131 667 9386
Fax: +44 (0) 131 667 5176
Email: [email protected]
http://www.wolfson.co.uk
Production Data Datasheets contain final
specifications current on publication date.
Supply of products conforms to Wolfson
Microelectronics' Terms and Conditions.
©1999 Wolfson Microelectronics Ltd.
1 page WM2604
Production Data
Test Conditions:
RL = 10kΩ, CL = 100pF. AVDD = DVDD = 5V ± 10%, VREF = 2.048V and AVDD = DVDD = 3V ± 10%, VREF = 1.024V over
recommended operating free-air temperature range (unless noted otherwise).
PARAMETER
SYMBOL
TEST CONDITIONS
MIN TYP
MAX
UNIT
Reference
Reference input resistance
Reference input capacitance
RREFIN
CREFIN
10 MΩ
5 pF
Reference feedthrough
VREF = 1VPP at 1kHz
+ 1.024V dc, DAC code 0
-75
dB
Reference input bandwidth
VREF = 0.2VPP + 1.024V dc
DAC code 512
Slow
0.5 MHz
Fast 1 MHz
Digital Inputs
High level input current
IIH Input voltage = DVDD
1 µA
Low level input current
Input capacitance
IIL Input voltage = 0V
CI
-1 µA
3 pF
Notes:
1. Integral non-linearity (INL) is the maximum deviation of the output from the line between zero and full scale (excluding the effects of
zero code and full scale errors).
2. Differential non-linearity (DNL) is the difference between the measured and ideal 1LSB amplitude change of any adjacent two codes. A
guarantee of monotonicity means the output voltage changes in the same direction (or remains constant) as a change in digital input code.
3. Zero code error is the voltage output when the DAC input code is zero.
4. Gain error is the deviation from the ideal full scale output excluding the effects of zero code error.
5. Power supply rejection ratio is measured by varying AVDD from 4.5V to 5.5V and measuring the proportion of this signal imposed on
the zero code error and the gain error.
6. Zero code error and Gain error temperature coefficients are normalised to full scale voltage.
7. Output load regulation is the difference between the output voltage at full scale with a 10kΩ load and 2kΩ load. It is expressed as a
percentage of the full scale output voltage with a 10kΩ load.
8. IDD is measured while continuously writing code 512 to the DAC. For VIH < DVDD - 0.7V and VIL > 0.7V supply current will increase.
9. Typical supply current in power down mode is 10nA. Production test limits are wider for speed of test.
10. Slew rate results are for the lower value of the rising and falling edge slew rates.
11. Settling time is the time taken for the signal to settle to within 0.5LSB of the final measured value for both rising and falling edges. Limits
are ensured by design and characterisation, but are not production tested.
12. SNR, SNRD, THD and SPFDR are measured on a synthesised sinewave at frequency fOUT generated with a sampling frequency fs.
WOLFSON MICROELECTRONICS LTD
PD Rev 1.0 June 99
5
5 Page |
Páginas | Total 10 Páginas | |
PDF Descargar | [ Datasheet WM2604.PDF ] |
Número de pieza | Descripción | Fabricantes |
WM2604 | Quad 10-Bit Serial Input Voltage Output DAC | Wolfson Microelectronics plc |
WM2608 | Octal 10-bit/ Serial Input/ Voltage Output DAC with Power Down | Wolfson Microelectronics plc |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |