|
|
PDF VT5F9MN0007 Data sheet ( Hoja de datos )
| Número de pieza | VT5F9MN0007 | |
| Descripción | RF Data Sheet RF Modulator | |
| Fabricantes | Sharp Electrionic Components | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de VT5F9MN0007 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
RF Data Sheet
VT5F9MN0006/07
RF Modulator
FEATURES
• Stabilized, compact, and lightweight design.
• A board-in type mountable directly on the mother
board of the set.
• Bus noise elimination through the use of a built-in
white clip circuit.
• Usable for many purposes such as BS, CATV, etc.,
in addition to VCR and laser disc.
FUNCTIONAL DESCRIPTION
This modulator is designed for operation in NTSC-M
systems. An RF antenna input is provided by an F
Female connector and the combined RF output is pro-
vided on an F connector. The antenna input signals
appear on the RF output when the modulator portion is
not operating, allowing for transparent operation with
other household video appliances. When the modula-
tor is in use, the modulated signal is seen at output and
the antenna input spectrum is suppressed.
A tuner-out port is included in the VT5F9MN0007 as
this unit is intended for applications where a local tuner
capability is desired, such as in a combine VCR prod-
uct. The tuner-out port is a sample of the antenna input
spectrum and is always active. The modulator may also
be used in satellite television applications. The output
channel may be selected between NTSC channels 3
and 4, as designated in North America. The modulator
operates from a +5 V source.
ANTENNA
IN
DISTRIBUTOR
RF SW
HIGH
PASS FILTER
TUNER
OUT
TV
OUT
RF SW
VIDEO
IN
VIDEO
CLAMPER
WHITE
CLIPPER
MODULATOR
BANDPASS
FILTER
AUDIO
IN
SAW
RESONATOR
PRE-
EMPHASIS
CH SW
RF CARRIER
OSC
AMP
FM
MODULATOR
TANK
(4.5 MHz)
Figure 1. Block Diagram
MOD20-3
RF Data Sheet
1
1 page  
RF Modulator
VT5F9MN0006/07
LIFE SUPPORT POLICY
SHARP components should not be used in medical devices with life support functions or in safety equipment (or similiar applications where
component failure would result in loss of life or physical harm) without the written approval of an officer of the SHARP Corporation.
LIMITED WARRANTY
SHARP warrants to its Customer that the Products will be free from defects in material and workmanship under normal use and service for a
period of one year from the date of invoice. Customer's exclusive remedy for breach of this warranty is that SHARP will either (i) repair or
replace, at its option, any Product which fails during the warranty period because of such defect (if Customer promptly reported the failure to
SHARP in writing) or, (ii) if SHARP is unable to repair or replace, refund the purchase price of the Product upon its return to SHARP. This
warranty does not apply to any Product which has been subjected to misuse, abnormal service or handling, or which has been altered or
modified in design or construction, or which has been serviced or repaired by anyone other than Sharp. The warranties set forth herein are in
lieu of, and exclusive of, all other warranties, express or implied. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE
WARRANTIES OF MERCHANTABILITY, FITNESS FOR USE AND FITNESS FOR A PARTICULAR PURPOSE, ARE SPECIFICALLY
EXCLUDED. In no event will Sharp be liable, or in any way responsible, for any incidental or consequential economic or property damage.
The above warranty is also extended to Customers of Sharp authorized distributors with the following exception: reports of failures of Products
during the warranty period and return of Products that were purchased from an authorized distributor must be made through the distributor.
In case Sharp is unable to repair or replace such Products, refunds will be issued to the distributor in the amount of distributor cost.
SHARP reserves the right to make changes in specifications at any time and without notice. SHARP does not assume any responsibility
for the use of any circuitry described; no circuit patent licenses are implied.
NORTH AMERICA
SHARP Microelectronics
of the Americas
5700 NW Pacific Rim Blvd., M/S 20
Camas, WA 98607, U.S.A.
Phone: (360) 834-2500
Telex: 49608472 (SHARPCAM)
Facsimile: (360) 834-8903
http://www.sharpsma.com
©1999 by SHARP Corporation
EUROPE
SHARP Electronics (Europe) GmbH
Microelectronics Division
Sonninstraße 3
20097 Hamburg, Germany
Phone: (49) 40 2376-2286
Facsimile: (49) 40 2376-2232
http://www.sharpmed.com
ASIA
SHARP Corporation
Integrated Circuits Group
2613-1 Ichinomoto-Cho
Tenri-City, Nara, 632, Japan
Phone: (07436) 5-1321
Telex: LABOMETA-B J63428
Facsimile: (07436) 5-1532
Reference Code SMA99011
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet VT5F9MN0007.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| VT5F9MN0006 | RF Data Sheet RF Modulator | Sharp Electrionic Components |
| VT5F9MN0007 | RF Data Sheet RF Modulator | Sharp Electrionic Components |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |