DataSheet.es    


PDF UPD178006GC Data sheet ( Hoja de datos )

Número de pieza UPD178006GC
Descripción 8-BIT SINGLE-CHIP MICROCONTROLLER
Fabricantes NEC 
Logotipo NEC Logotipo



Hay una vista previa y un enlace de descarga de UPD178006GC (archivo pdf) en la parte inferior de esta página.


Total 30 Páginas

No Preview Available ! UPD178006GC Hoja de datos, Descripción, Manual

DATA SHEET
MOS INTEGRATED CIRCUIT
µ PD178004, 178006, 178016, 178018
8-BIT SINGLE-CHIP MICROCONTROLLER
The µPD178004, 178006, 178016 and 178018 are 8-bit single-chip CMOS microcontrollers that incorporate
hardware for digital tuning systems.
The CPU uses the 78K/0 architecture and high-speed access to internal memory and control of peripheral
hardware are easy to implement. Also, the instructions used are the high-speed 78K/0 instructions, suitable for
system control.
The rich assortment of peripheral hardware includes an input/output port, 8-bit timer, A/D converter, serial
interface, power-ON clear circuits, as well as a pre-scaler for digital tuning, a PLL frequency synthesizer and a
frequency counter.
The µPD178P018, one-time PROM or EPROM versions which can be operated in the same supply voltage
range as for the mask ROM versions, and various development tools, are also available.
For more information on functions, refer to the following User’s Manuals. Be sure to read them when
designing.
µPD178018 Subseries User’s Manual: U11410E
78K/0 Series User’s Manual Instruction: IEU-1372
FEATURES
• Internal high-capacity ROM and RAM
Items
Product Name
µPD178004
µPD178006
µPD178016
µPD178018
Program Memory
ROM
Internal High-Speed RAM
32 Kbytes
1024 bytes
48 Kbytes
60 Kbytes
Data Memory
Buffer RAM
32 bytes
Internal Expanded RAM
Not provided
2048 bytes
• Instruction Cycle: 0.44 µs (4.5-MHz crystal oscillator used)
• Large array of on-chip peripheral hardware
General-purpose input/output port, A/D converter, serial interface, timer, frequency counter, power-ON clear
circuits.
• On-chip hardware for a PLL frequency synthesizer.
Dual modulus pre-scaler, programmable divider, phase comparator, charge pump.
• Vector Interrupts: 17
• Supply Voltage: VDD = 4.5 to 5.5 V (during PLL operation)
VDD = 3.5 to 5.5 V (during CPU operation, when the system clock is fX/2 or lower)
VDD = 4.5 to 5.5 V (during CPU operation, when the system clock is fX)
The information in this document is subject to change without notice.
Document No. U11800EJ2V1DS00 (2nd Edition)
Date Published March 1997 N
Printed in Japan
*The mark shows major revised points.
©
1997

1 page




UPD178006GC pdf
µPD178004, 178006, 178016, 178018
TABLE OF CONTENTS
1. PIN CONFIGURATION (TOP VIEW) ................................................................................................ 6
2. BLOCK DIAGRAM ........................................................................................................................... 8
3. PIN FUNCTION LIST ........................................................................................................................ 9
3.1 PORT PINS ................................................................................................................................ 9
3.2 PINS OTHER THAN PORT PINS ............................................................................................ 10
3.3 INPUT/OUTPUT CIRCUITS AND RECOMMENDED CONNECTION OF UNUSED PINS ..... 11
4. MEMORY SPACE ........................................................................................................................... 14
5. PERIPHERAL HARDWARE FUNCTION FEATURES ................................................................... 15
5.1 PORTS ..................................................................................................................................... 15
5.2 CLOCK GENERATOR ............................................................................................................. 16
5.3 TIMER ...................................................................................................................................... 16
5.4 BUZZER OUTPUT CONTROL CIRCUIT ................................................................................. 18
5.5 A/D CONVERTER .................................................................................................................... 19
5.6 SERIAL INTERFACES ............................................................................................................ 19
5.7 PLL FREQUENCY SYNTHESIZER ......................................................................................... 21
5.8 FREQUENCY COUNTER ........................................................................................................ 22
6. INTERRUPT FUNCTIONS AND TEST FUNCTIONS ..................................................................... 23
6.1 INTERRUPT FUNCTIONS ....................................................................................................... 23
6.2 TEST FUNCTIONS .................................................................................................................. 26
7. STANDBY FUNCTION ................................................................................................................... 27
8. RESET FUNCTION ......................................................................................................................... 27
9. INSTRUCTION SET ........................................................................................................................ 28
10. ELECTRICAL SPECIFICATIONS................................................................................................... 30
11. PACKAGE DRAWINGS ................................................................................................................. 46
12. RECOMMENDED SOLDERING CONDITIONS .............................................................................. 47
APPENDIX A. DEVELOPMENT TOOLS ............................................................................................. 48
APPENDIX B. RELATED DOCUMENTS ............................................................................................ 50
5

5 Page





UPD178006GC arduino
µPD178004, 178006, 178016, 178018
3.3 INPUT/OUTPUT CIRCUITS AND RECOMMENDED CONNECTION OF UNUSED PINS
Table 3-1 shows the input/output circuit types of pins and the recommended conditions for unused pins.
Refer to Figure 3-1 for the configuration of the input/output circuit of each type.
Table 3-1. I/O Circuit Type of Each Circuit
Pin Name
P00/INTP0
P01/INTP1-P06/INTP6
P10/ANI0-P15/ANI5
P20/SI1
P21/SO1
P22/SCK1
P23/STB
P24/BUSY
P25/SI0/SB0/SDA0
P26/SO0/SB1/SDA1
P27/SCK0/SCL
P30-P32
P33/TI1, P34/TI2
P35
P36/BEEP
P37
P40-P47
P50-P57
P60-P63
P64-P67
P120-P125
P132/PWM0-P134/PWM2
EO0
EO1
VCOL, VCOH
AMIFC, FMIFC
IC
I/O Circuit Type
2
8
11-A
8
5
8
5
8
10
I/O
Input
I/O
Recommended Connections of Unused Pins
Connected to GND or GNDPORT
Set in general-purpose input port mode by software and
individually connected to VDD, VDDPORT, GND, or GNDPORT
via resistor.
5
8
5
5-G
5
13
5
19
DTS-EO1
DTS-EO2
DTS-AMP
Output Set to low-level output by software and open
Open
Input Set to disabled status by software and open
— Connected to GND or GNDPORT directly
11

11 Page







PáginasTotal 30 Páginas
PDF Descargar[ Datasheet UPD178006GC.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
UPD178006GC8-BIT SINGLE-CHIP MICROCONTROLLERNEC
NEC

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar