DataSheet.es    


PDF UPC8110GR Data sheet ( Hoja de datos )

Número de pieza UPC8110GR
Descripción 900 MHz BAND DIRECT QUADRATURE MODULATOR IC FOR DIGITAL MOBILE COMMUNICATION SYSTEMS
Fabricantes NEC 
Logotipo NEC Logotipo



Hay una vista previa y un enlace de descarga de UPC8110GR (archivo pdf) en la parte inferior de esta página.


Total 28 Páginas

No Preview Available ! UPC8110GR Hoja de datos, Descripción, Manual

DDAATTAA SSHHEEEETT
BIPOLAR ANALOG INTEGRATED CIRCUIT
µPC8110GR
1 GHz DIRECT QUADRATURE MODULATOR
FOR DIGITAL MOBILE COMMUNICATION
DESCRIPTION
The µPC8110GR is a sillicon monolithic integrated circuit designed as 1 GHz direct quadrature modulator for
digital mobile communication systems. This modulator housed in a 20 pin plastic SSOP that easy to install and
contributes to miniaturizing the system.
The device has power save function and can operates 2.7 to 3.6 V supply voltage to realize low power
consumption.
FEATURES
• Direct modulation range : 800 MHz to 1 GHz
• Supply voltage range : VCC = 2.7 to 3.6 V
• Low operation current : ICC = 24 mA typical @ VCC = 3 V
• Low phase difference due to digital phase shifter is adopted.
• 20 pin SSOP suitable for high density surface mounting.
• Low current sleep mode
APPLICATION
• Digital cellular phone (PDC, IS-54/IS-136, GSM etc..)
ORDERING INFORMATION
PART NUMBER
µPC8110GR-E1
PACKAGE
20 pin plastic SSOP
PACKING FORM
Carrier tape width 12 mm. Q’ty 2.5 kp/Reel Pin 1 indicated pull-out
direction of tape.
Remark For evaluation sample order, please contact your local NEC sales office. (Order number: µPC8110GR)
Caution electro-static sensitive device
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.
Document No. P11074EJ3V0DS00 (3rd edition)
Date Published October 1999 N CP(K)
Printed in Japan
The mark shows major revised points.
©
1996, 1999

1 page




UPC8110GR pdf
µPC8110GR
PIN EXPLANATION
Pin SUPPLY PIN
No. ASSIGNMENT VOL. (V) VOL. (V) FUNCTION AND APPLICATION
1 LOin
2.6 LO input for phase shifter.
Connect around 50 between 1
and 3 pin to match to 50 .
2 GND
(for Local
18 Amp. Block)
0
Connect to the ground with
minimum inductance.
Track length should be kept as
short as possible.
3 LOin
2.6 Bypass of LO input.
This pin is grounded through
around 33 pF capacitor.
5Q
VCC/2
Input for Q signal.
This input impedance is 150 k.
In case of that I/Q input signals
are single ended, amplitude of
the signal is 500 mVp-p max.
Note 2
6Q
VCC/2
Input for Q signal.
This input impedance is 150 k.
In case of that I/Q input signals
are single ended, VCC/2 biased
DC signal should be input.
In case of that I/Q input signals
are differential, amplitude of the
signal is 250 mVp-p max. Note 2
7I
VCC/2
Input for I signal.
This input impedance is 150 k.
In case of that I/Q input signals
are single ended, VCC/2 biased
DC signal should be input.
In case of that I/Q input signals
are differential, amplitude of the
signal is 250 mVp-p max. Note 2
8I
VCC/2
Input for I signal.
This input impedance is 150 k.
In case of that I/Q input signals
are single ended, amplitude of
the signal is 500 mVp-p max.
Note 2
9 GND
(for Quadrature
13 Modulator Block)
16
0
Connect to the ground with
minimum inductance.
Track length should be kept as
short as possible.
5
8
EQUIVALENT CIRCUIT
1
3
6
7
Data Sheet P11074EJ3V0DS00
5

5 Page





UPC8110GR arduino
Lo INPUT FREQUENCY vs
PRFout, LoL, ImR, IM3I/Q
(at VCC = 2.7 V, TA = +85 ˚C)
–30 –5
LoL
–35 –10
PRFout
–40
IM3I/Q
–15
–45 –20
ImR
–50 –25
–55 –30
700 800 900 1000 1100
fLO - Local Input Frequency - MHz
Lo INPUT POWER vs
PRFout, LoL, ImR, IM3I/Q
(at VCC = 2.7 V, TA = –40 ˚C)
–30 LoL –5
–35 –10
PRFout
–40 –15
ImR
–45
–20
–50
IM3I/Q
–25
–55 –30
–15 –10
–5
LO - Local Input Power - dBm
Lo INPUT FREQUENCY vs
PRFout, LoL, ImR, IM3I/Q
(at VCC = 3.0 V, TA = +85 ˚C)
–30 –5
–35 –10
LoL
PRFout
–40
IM3I/Q
–15
–45 –20
–50
ImR
–25
–55 –30
700 800 900 1000 1100
fLO - Local Input Frequency - MHz
Lo INPUT POWER vs
PRFout, LoL, ImR, IM3I/Q
(at VCC = 3.0 V, TA = –40 ˚C)
–30 LoL –5
–35 –10
PRFout
–40 –15
ImR
–45
–20
–50
IM3I/Q
–25
–55 –30
–15 –10
–5
LO - Local Input Power - dBm
µPC8110GR
Lo INPUT FREQUENCY vs
PRFout, LoL, ImR, IM3I/Q
(at VCC = 3.6 V, TA = +85 ˚C)
–30 –5
LoL
–35 –10
PRFout
–40
–15
IM3I/Q
–45 –20
ImR
–50 –25
–55 –30
700 800 900 1000 1100
fLO - Local Input Frequency - MHz
Lo INPUT POWER vs
PRFout, LoL, ImR, IM3I/Q
(at VCC = 3.6 V, TA = –40 ˚C)
–30 LoL –5
–35 –10
PRFout
–40 –15
ImR
–45 –20
–50
IM3I/Q
–25
–55 –30
–15 –10
–5
LO - Local Input Power - dBm
Data Sheet P11074EJ3V0DS00
11

11 Page







PáginasTotal 28 Páginas
PDF Descargar[ Datasheet UPC8110GR.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
UPC8110GR1 GHz DIRECT QUADRATURE MODULATOR FOR DIGITAL MOBILE COMMUNICATIONNEC
NEC
UPC8110GRUP-CONVERTER WITH AGC FUNCTION QUADRATURE MODULATOR IC FOR DIGITAL MOBILE COMMUNICATION SYSTEMSNEC
NEC
UPC8110GR900 MHz BAND DIRECT QUADRATURE MODULATOR IC FOR DIGITAL MOBILE COMMUNICATION SYSTEMSNEC
NEC
UPC8110GRUP CONVERTER WITH AGC FUNCTION + QUADRATURE MODULATOR IC FOR DIGITAL MOBILE COMMUNICATION SYSTEMSNEC
NEC

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar