|
|
Número de pieza | UPC1685G-E1 | |
Descripción | GENERAL PURPOSE 5 V FREQUENCY DOWN-CONVERTER IC | |
Fabricantes | NEC | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de UPC1685G-E1 (archivo pdf) en la parte inferior de esta página. Total 16 Páginas | ||
No Preview Available ! DATA SHEET
BIPOLAR ANALOG INTEGRATED CIRCUIT
µPC1685G
GENERAL PURPOSE 5 V FREQUENCY DOWN-CONVERTER IC
DESCRIPTION
The µPC1685G is Silicon monolithic IC designed for UHF band receiver applications. This IC consists of double
balanced mixer, local oscillator, IF amplifier, and voltage regulator.
The package is 8-pin SOP suitable for high-density surface mount.
FEATURES
• UHF band operation
• Good capability of UHF-varactor diode due to balanced amplifier oscillator
• Supply voltage: 5 V
• Packaged in 8-pin SOP suitable for high-density mounting
APPLICATIONS
• Tuners for TV and VCR
• Receivers for UHF band
ORDERING INFORMATION
Part Number
µPC1685G-E1
Package
8-pin plastic SOP (225 mil)
Package Style
Embossed tape 12 mm wide.
Pin 1 indicates pull-out direction of tape.
Qty 2.5 kp/reel.
Remark To order evaluation samples, please contact your local NEC office. (Part number for sample order:
µPC1685G)
Caution Electro-static sensitive devices
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.
Document No. P14483EJ2V0DS00 (2nd edition)
(Previous No. ID-2330)
Date Published October 1999 N CP(K)
Printed in Japan
The mark shows major revised points.
©
1988, 1999
1 page µPC1685G
STANDARD CHARACTERISTICS (FOR REFERENCE) (VCC = 5 V, TA = +25 °C unless otherwise specified)
Parameter
Oscillation Frequency Stability
Oscillation Frequency Drift
Oscillation Start Voltage
1 % Cross-modulation Distortion 1
1 % Cross-modulation Distortion 2
Symbol
fstb
fdrift
VOSC
CM1
CM2
Test Conditions
VCC = ±10 %, fOSC = 550 to 950 MHz Note 1
fOSC = 550 to 950 MHz, 30 min.
Note 1
fOSC = 550 to 950 MHz
Note 1
fRF = 500 MHz
Note 2, 3
fRF = 900 MHz
Note 2, 3
Reference Values
±200
150
3.0
86.5
86
Unit
kHz
kHz
V
dBµ
dBµ
Notes 1. By test circuit 2
2. By test circuit 1
3. fundes = fRF ±12 MHz, PRF = −31 dBm, fIF = 50 MHz, POSC = −5 dBm
AM: 100 kHz, 30 % Mod., S/I Ratio = 46 dBc, output 75 Ω open
Data Sheet P14483EJ2V0DS00
5
5 Page PACKAGE DIMENSIONS
8 PIN PLASTIC SOP (225 mil) (UNIT: mm)
85
µPC1685G
detail of lead end
1
1.57 ± 0.2
1.49
5.2 ± 0.2
4
3˚+–37˚˚
6.5 ± 0.3
4.4 ± 0.15
1.1 ± 0.2
1.27
0.42
+0.08
–0.07
0.1 ± 0.1
0.85 MAX.
0.12 M
0.6 ± 0.2
0.17
+0.08
–0.07
0.10
NOTE Each lead centerline is located within 0.12 mm of its true position (T.P.) at maximum material condition.
Data Sheet P14483EJ2V0DS00
11
11 Page |
Páginas | Total 16 Páginas | |
PDF Descargar | [ Datasheet UPC1685G-E1.PDF ] |
Número de pieza | Descripción | Fabricantes |
UPC1685G-E1 | GENERAL PURPOSE 5 V FREQUENCY DOWN-CONVERTER IC | NEC |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |