|
|
PDF UPC1679G-E2 Data sheet ( Hoja de datos )
| Número de pieza | UPC1679G-E2 | |
| Descripción | 5 V-BIAS/ +5.5 dBm OUTPUT/ 1.8 GHz WIDEBAND Si MMIC AMPLIFIER | |
| Fabricantes | NEC | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de UPC1679G-E2 (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
|
No Preview Available !
DATA SHEET
BIPOLAR ANALOG INTEGRATED CIRCUIT
µPC1679G
5 V-BIAS, +15.5 dBm OUTPUT, 1.8 GHz WIDEBAND
Si MMIC AMPLIFIER
DESCRIPTION
The µPC1679G is a silicon monolithic integrated circuit designed as medium output power amplifier for high
frequency system applications. Due to +13 dBm TYP. output at 1 GHz, this IC is recommendable for transmitter
stage amplifier of L Band wireless communication systems. This IC is packaged in 8-pin plastic SOP.
This IC is manufactured using NEC’s 20 GHz fT NESATTMIV silicon bipolar process. This process uses silicon
nitride passivation film and gold electrodes. These materials can protect chip surface from external pollution and
prevent corrosion/migration. Thus, this IC has excellent performance, uniformity and reliability.
FEATURES
• Supply voltage
• Saturated output power
• Wideband response
• Isolation
• Power Gain
: VCC = 4.5 to 5.5 V
: PO(sat) = +15.5 dBm TYP. @ f = 500 MHz with external inductor
: fu = 1.8 GHz TYP. @ 3 dB bandwidth
: ISL = 34 dB TYP. @ f = 500 MHz
: GP = 21.5 dB TYP. @ f = 500 MHz
ORDERING INFORMATION
Part Number
µPC1679G-E1
µPC1679G-E2
Package
8-pin plastic SOP (225 mil)
Marking
1679
Supplying Form
Embossed tape 12 mm wide.
1 pin is tape pull-out direction.
Qty 2.5 kp/reel.
Embossed tape 12 mm wide.
1 pin is tape roll-in direction.
Qty 2.5 kp/reel.
Remark To order evaluation samples, please contact your local NEC sales office.
(Part number for sample order: µPC1679G)
Caution Electro-static sensitive devices.
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.
Document No. P12434EJ4V0DS00 (4th edition)
Date Published September 1999 N CP(K)
Printed in Japan
The mark shows major revision points.
©
1994, 1999
1 page  
µPC1679G
OUTPUT POWER vs. INPUT POWER
+25
f = 500 MHz
+20 VCC = 5.5 V
VCC = 5.0 V
+15
+10 VCC = 4.5 V
+5
0
–20 –15 –10 –5 0 +5
Input Power Pin (dBm)
+10
SATURATED OUTPUT POWER vs. FREQUENCY
+25
Pin = +3 dBm
+20
VCC = 5.5 V
+15
VCC = 5.0 V
+10 VCC = 4.5 V
+5
0
0.01
0.03 0.1 0.3
1.0
Frequency f (GHz)
3.0
OUTPUT POWER vs. INPUT POWER
+25
f = 500 MHz
VCC = 5.0 V
+20
TA = +25 °C TA = +85 °C
+15
TA = –45 °C
+10
+5
0
–20 –15 –10 –5 0 +5
Input Power Pin (dBm)
+10
THIRD ORDER INTERMODULATION DISTORTION
vs. OUTPUT POWER OF EACH TONE
–60
f1 = 500 MHz
f2 = 502 MHz
–50
VCC = 5.5 V
–40
VCC = 5.0 V
–30
VCC = 4.5 V
–20
–10
0
–5 0 +5 +10 +15
Output Power of Each Tone PO(each) (dBm)
Data Sheet P12434EJ4V0DS00
5
5 Page 
[MEMO]
µPC1679G
Data Sheet P12434EJ4V0DS00
11
11 Page | ||
| Páginas | Total 12 Páginas | |
| PDF Descargar | [ Datasheet UPC1679G-E2.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| UPC1679G-E1 | 5 V-BIAS/ +5.5 dBm OUTPUT/ 1.8 GHz WIDEBAND Si MMIC AMPLIFIER | NEC |
| UPC1679G-E2 | 5 V-BIAS/ +5.5 dBm OUTPUT/ 1.8 GHz WIDEBAND Si MMIC AMPLIFIER | NEC |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |