|
|
PDF S1M Data sheet ( Hoja de datos )
| Número de pieza | S1M | |
| Descripción | SURFACE MOUNT RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere) | |
| Fabricantes | Pan Jit International. | |
| Logotipo |  |
|
 1. 1000V, Passivated Rectifier - Vishay  Hay una vista previa y un enlace de descarga de S1M (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
S1A THRU S1M
SURFACE MOUNT RECTIFIER
VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere
FEATURES
l For surface mounted applications
l High temperature metallurgically bonded-no
compression contacts as found in other
diode-constructed rectifiers
l Glass passivated junction
l Built-in strain relief
l Easy pick and place
l Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
l Complete device submersible temperature of
260 ¢J for 10 seconds in solder bath
SMB/DO-214AA
MECHANICAL DATA
Case: JEDEC DO-214AA molded plastic
Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
Polarity: Indicated by cathode band
Standard packaging: 12mm tape (EIA-481)
Weight: 0.003 ounce, 0.093 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ¢J ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
SYMBOLS S1A S1B S1D S1G S1J
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current,
at TL=100 ¢J
Peak Forward Surge Current 8.3ms single half sine-
wave superimposed on rated load(JEDEC method)
Maximum Instantaneous Forward Voltage at 1.0A
Maximum DC Reverse Current TA=25 ¢J
At Rated DC Blocking Voltage TA=125 ¢J
Maximum Reverse Recovery Time (Note 1)
Typical Junction capacitance (Note 2)
Typical Thermal Resistance (Note 3)
VRRM
VRMS
VDC
I(AV)
IFSM
VF
IR
TRR
CJ
R £KJL
50 100 200 400 600
35 70 140 280 420
50 100 200 400 600
1.0
30.0
1.10
5.0
50
2.5
12
30.0
Operating and Storage Temperature Range
TJ,TSTG
-55 to +150
NOTES:
1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, Irr=0.25A
2. Measured at 1 MHz and Applied Vr=4.0 volts
3. 8.0mm2 (.013mm thick) land areas
S1K S1M UNITS
800 1000 Volts
560 700 Volts
800 1000 Volts
Amps
Amps
Volts
£g A
£g S
PF
¢J /W
¢J
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet S1M.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| S1-0505ND | (S1 Series) DC-DC Converters |  Lifu Electronics |
| S1-0512ND | (S1 Series) DC-DC Converters | Lifu Electronics |
| S1-0515ND | (S1 Series) DC-DC Converters | Lifu Electronics |
| S1-1205ND | (S1 Series) DC-DC Converters | Lifu Electronics |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |