DataSheet.es    


PDF S102S02 Data sheet ( Hoja de datos )

Número de pieza S102S02
Descripción SIP Type SSR for Medium Power Control
Fabricantes Sharp Electrionic Components 
Logotipo Sharp Electrionic Components Logotipo



Hay una vista previa y un enlace de descarga de S102S02 (archivo pdf) en la parte inferior de esta página.


Total 13 Páginas

No Preview Available ! S102S02 Hoja de datos, Descripción, Manual

S102S02 Series
S202S02 Series
Non-zero cross type is also available. (S102S01 Series/
S202S01 Series)
S102S02 Series
S202S02 Series
IT(rms)8A, Zero Cross type
SIP 4pin
Triac output SSR
Description
S102S02 Series and S202S02 Series Solid State
Relays (SSR) are an integration of an infrared emitting
diode (IRED), a Phototriac Detector and a main output
Triac. These devices are ideally suited for controlling
high voltage AC loads with solid state reliability while
providing 4.0kV isolation (Viso(rms)) from input to
output.
Features
1. Output current, IT(rms)8.0A
2. Zero crossing functionary (VOX : MAX. 35V)
3. 4 pin SIP package
4. High repetitive peak off-state voltage
(VDRM : 600V, S202S02 Series)
(VDRM : 400V, S102S02 Series)
5. High isolation voltage between input and output
(Viso(rms) : 4.0kV)
6. Screw hole for heat sink
Agency approvals/Compliance
1. Recognized by UL508, file No. E94758 (as models No.
S102S02/S202S02)
2. Approved by CSA 22.2 No.14, file No. LR63705 (as
models No. S102S02/S202S02)
3. Package resin : UL flammability grade (94V-0)
Applications
1. Isolated interface between high voltage AC devices
and lower voltage DC control circuitry.
2. Switching motors, fans, heaters, solenoids, and
valves.
3. Power control in applications such as lighting and
temperature control equipment.
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.:D4-A02401FEN
1 Date Apr. 28. 2004
© SHARP Corporation

1 page




S102S02 pdf
S102S02 Series
S202S02 Series
Model Line-up
Shipping Package
Model No.
Case
200pcs/case
S102S02F
S202S02F
V DRM
[V]
400
600
IFT [mA]
(VD =6V,
R L=30)
MAX.8
MAX.8
Please contact a local SHARP sales representative to see the actual status of the production.
Sheet No.: D4-A02401F EN
5

5 Page





S102S02 arduino
S102S02 Series
S202S02 Series
Cleaning instructions
Solvent cleaning :
Solvent temperature should be 45˚C or below. Immersion time should be 3minutes or less.
Ultrasonic cleaning :
The impact on the device varies depending on the size of the cleaning bath, ultrasonic output, cleaning time,
size of PCB and mounting method of the device.
Therefore, please make sure the device withstands the ultrasonic cleaning in actual conditions in advance of
mass production.
Recommended solvent materials :
Ethyl alcohol, Methyl alcohol and Isopropyl alcohol.
In case the other type of solvent materials are intended to be used, please make sure they work fine in ac-
tual using conditions since some materials may erode the packaging resin.
Presence of ODC
This product shall not contain the following materials.
And they are not used in the production process for this device.
Regulation substances : CFCs, Halon, Carbon tetrachloride, 1.1.1-Trichloroethane (Methylchloroform)
Specific brominated flame retardants such as the PBBOs and PBBs are not used in this product at all.
Sheet No.: D4-A02401FEN
11

11 Page







PáginasTotal 13 Páginas
PDF Descargar[ Datasheet S102S02.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
S102S01SIP Type SSR for Medium Power ControlSharp Electrionic Components
Sharp Electrionic Components
S102S02SIP Type SSR for Medium Power ControlSharp Electrionic Components
Sharp Electrionic Components
S102S03SIP Type SSR with Mounting Capability for External Heat SinkSharp Electrionic Components
Sharp Electrionic Components

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar