DataSheet.es    


PDF PCA9544PWDH Data sheet ( Hoja de datos )

Número de pieza PCA9544PWDH
Descripción 4-channel I2C multiplexer and interrupt controller
Fabricantes NXP Semiconductors 
Logotipo NXP Semiconductors Logotipo



Hay una vista previa y un enlace de descarga de PCA9544PWDH (archivo pdf) en la parte inferior de esta página.


Total 12 Páginas

No Preview Available ! PCA9544PWDH Hoja de datos, Descripción, Manual

INTEGRATED CIRCUITS
PCA9544
4-channel I2C multiplexer and interrupt
controller
Product specification
Supersedes data of 1999 Apr 01
1999 Oct 07
Philips
Semiconductors

1 page




PCA9544PWDH pdf
Philips Semiconductors
4-channel I2C multiplexer and interrupt controller
Product specification
PCA9544
CHARACTERISTICS OF THE I2C-BUS
The I2C-bus is for 2-way, 2-line communication between different ICs
or modules. The two lines are a serial data line (SDA) and a serial
clock line (SCL). Both lines must be connected to a positive supply
via a pull-up resistor when connected to the output stages of a device.
Data transfer may be initiated only when the bus is not busy.
Bit transfer
One data bit is transferred during each clock pulse. The data on the
SDA line must remain stable during the HIGH period of the clock
pulse as changes in the data line at this time will be interpreted as
control signals (see FIgure 1).
Start and stop conditions
Both data and clock lines remain HIGH when the bus is not busy. A
HIGH-to-LOW transition of the data line, while the clock is HIGH is
defined as the start condition (S). A LOW-to-HIGH transition of the
data line while the clock is HIGH is defined as the stop condition (P)
(see Figure 2).
System configuration
A device generating a message is a ‘transmitter’, a device receiving
is the ‘receiver’. The device that controls the message is the
‘master’ and the devices which are controlled by the master are the
‘slaves’ (see Figure 3).
SDA
SCL
data line
stable;
data valid
change
of data
allowed
SW00363
Figure 1. Bit transfer
SDA
SDA
SCL
S
SCL
P
START condition
STOP condition
Figure 2. Definition of start and stop conditions
SW00365
SDA
SCL
MASTER
TRANSMITTER/
RECEIVER
SLAVE
RECEIVER
SLAVE
TRANSMITTER/
RECEIVER
MASTER
TRANSMITTER
Figure 3. System configuration
MASTER
TRANSMITTER/
RECEIVER
SLAVE
I2C
MULTIPLEXER
SW00366
1999 Oct 07
5

5 Page





PCA9544PWDH arduino
Philips Semiconductors
4-channel I2C multiplexer and interrupt controller
NOTES
Product specification
PCA9544
1999 Oct 07
11

11 Page







PáginasTotal 12 Páginas
PDF Descargar[ Datasheet PCA9544PWDH.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
PCA9544PWDH4-channel I2C multiplexer and interrupt controllerNXP Semiconductors
NXP Semiconductors

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar