DataSheet.es    


PDF IH6201CJE Data sheet ( Hoja de datos )

Número de pieza IH6201CJE
Descripción Dual CMOS Driver/Voltage Translator
Fabricantes Intersil Corporation 
Logotipo Intersil Corporation Logotipo



Hay una vista previa y un enlace de descarga de IH6201CJE (archivo pdf) en la parte inferior de esta página.


Total 4 Páginas

No Preview Available ! IH6201CJE Hoja de datos, Descripción, Manual

Semiconductor
April 1999
Features
NO
Call
CRoeErnOCetrOBmaSMlaOAiMl:pLEpEcNlTeiDcnEaEtaPtDipoRpRnO@sEDP1hUL-aC8Ar0rTCi0sE-.4cM4o2Em-N7T747
Description
IH6201
Dual CMOS
Driver/Voltage Translator
• Driven Direct from TTL or CMOS Logic
• Translates Logic Levels Up to 30V Levels
• Switches 20VACPP Signals When Used in Conjunction
with the IH401A Varafet (As An Analog Gate)
• tON 300ns & tOFF 200ns for 30V Level Shifts
• Quiescent Supply Current 100µA for Any State (DC)
• Provides Both Normal & Inverted Outputs
Part Number Information
PART NUMBER
IH6201CJE
IH6201MJE
IH6201CPE
TEMP. RANGE
(oC)
PACKAGE
0 to 70
16 Ld CerDIP
-55 to 125 16 Ld CerDIP
0 to 70
16 Ld PDIP
The IH6201 is a CMOS, Monolithic, Dual Voltage Translator;
it takes low level TTL or CMOS logic signals and converts
them to higher levels (i.e. to ±15V swings). This translator is
typically used in making solid state switches, or analog
gates.
When used in conjunction with the IH401A Varafets, the
combination makes a complete solid state switch capable of
switching signals up to 22VP-P and up to 20MHz in
frequency. This switch is a “break-before-make” type (i.e.
tOFF time < tON time). The combination has typical tOFF
80ns and typical tON 200ns for signals up to 20VP-P in
amplitude.
A TTL “1” input strobe will force the θ driver output up to V+
level; the θ output will be driven down to the V- level. When
the TTL input goes to “0”, the θ output goes to V- and θ goes
to V+; thus θ and θ are 180o out of phase with each other.
These complementary outputs can be used to create a wide
variety of functions such as SPDT and DPDT switches, etc.;
alternatively the complementary outputs can be used to
drive N and P channel MOSFETs, to make a complete
CMOS analog gate.
The driver typically uses +5V and ±15V power supplies,
however a wide range of V+ and V- is also possible. It is nec-
essary that V+ > 5V for the driver to work properly, however.
Pinout
IH6201
(OUTLINE DWGS, JE, PE)
TOP VIEW
θ1 1
NC 2
NC 3
θ1 4
θ2 5
NC 6
NC 7
θ2 8
16 NC
15 TTL INPUT 1
14 V-
13 GND
12 +5V
11 V+
10 TTL INPUT 2
9 NC
Functional Diagram
CAUTION: These devices are sensitive to electrostatic discharge. Users should follow proper IC Handling Procedures.
Copyright © Harris Corporation 1998
4-1
File Number 3136.2

1 page





PáginasTotal 4 Páginas
PDF Descargar[ Datasheet IH6201CJE.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
IH6201CJEDual CMOS Driver/Voltage TranslatorIntersil Corporation
Intersil Corporation

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar