DataSheet.es    


PDF REF01 Data sheet ( Hoja de datos )

Número de pieza REF01
Descripción Voltage Reference
Fabricantes Analog Devices 
Logotipo Analog Devices Logotipo

REF01 datasheet


1. - 10V Precision Voltage Reference






Hay una vista previa y un enlace de descarga de REF01 (archivo pdf) en la parte inferior de esta página.


Total 20 Páginas

No Preview Available ! REF01 Hoja de datos, Descripción, Manual

Precision 2.5 V, 5.0 V, and 10.0 V
Voltage References
REF01/REF02/REF03
FEATURES
High output accuracy
REF01: 10.0 V, ±0.3% maximum
REF02: 5.0 V, ±0.3% maximum
REF03: 2.5 V, ±0.6% maximum
Adjustable output: ± 3% minimum
Excellent temperature stability
REF01: 8.5 ppm/°C maximum
REF02: 8.5 ppm/°C maximum
REF03: 50 ppm/°C maximum
Low noise
REF01: 30 μV p-p typical
REF02: 15 μV p-p typical
REF03: 6 μV p-p typical
High supply voltage range: up to 36 V maximum
Low supply current: 1.4 mA maximum
High load-driving capability: 10 mA maximum
Temperature output function
APPLICATIONS
Precision data systems
High resolution converters
Industrial process control systems
Precision instruments
Military and aerospace applications
GENERAL DESCRIPTION
The REF0x series of precision voltage references provide a
stable 10.0 V, 5.0 V, or 2.5 V output with minimal change in
response to variations in supply voltage, ambient temperature
or load conditions. The parts are available in 8-lead SOIC,
PDIP, CERDIP, and TO-99 packages, as well as 20-terminal
LCC packages (883 only), furthering the parts’ usability in
both standard and high stress applications.
With an external buffer and a simple resistor network, the
TEMP terminal can be used for temperature sensing and
approximation. A TRIM terminal is also provided on the
device for fine adjustment of the output voltage.
The small footprint, wide supply range, and application
versatility make the REF0x series of references ideal for general-
purpose and space-constrained applications.
Newer designs should use the ADR0x series of references,
which offer higher accuracy and temperature stability over a
wider operating temperature range, while maintaining full pin-
for-pin compatibility with the REF0x series. This data sheet
applies to commercial-grade products only. Contact sales or
visit analog.com for military-grade (883) data sheets.
Table 1. Selection Guide
Part Number Output Voltage
REF01
10.0 V
REF02
5.0 V
REF03
2.5 V
Input Voltage Range
12 V to 36 V
7.0 V to 36 V
4.5 V to 36 V
PIN CONFIGURATIONS
NC 1
VIN 2
REF01/
REF02/
8 NC
7 NC
TEMP 3 REF03 6 VOUT
GND 4 TOP VIEW 5 TRIM
(Not to Scale)
NC = NO CONNECT. DO NOT CONNECT ANYTHING
ON THESE PINS. SOME OF THEM ARE RESERVED
FOR FACTORY TESTING PURPOSES.
Figure 1. 8-Lead PDIP (P-Suffix),
8-Lead CERDIP (Z-Suffix),
8-Lead SOIC (S-Suffix)
NC
8
NC 1
7 NC
VIN 2
REF01/
REF02/
REF03
6 VOUT
NC 3
5 TRIM
4
GROUND
(CASE)
NC = NO CONNECT. DO NOT CONNECT ANYTHING
ON THESE PINS. SOME OF THEM ARE RESERVED
FOR FACTORY TESTING PURPOSES.
Figure 2. 8-Lead TO-99 (J-Suffix)
3 2 1 20 19
NC 4
VIN 5
NC 6
TEMP 7
NC 8
REF01/
REF02
TOP VIEW
(Not to Scale)
18 NC
17 NC
16 NC
15 VOUT
14 NC
9 10 11 12 13
NC = NO CONNECT. DO NOT CONNECT ANYTHING
ON THESE PINS. SOME OF THEM ARE RESERVED
FOR FACTORY TESTING PURPOSES.
Figure 3. 20-Terminal LCC (RC-Suffix;
883 Parts Only)
Rev. K
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©2000–2010 Analog Devices, Inc. All rights reserved.

1 page




REF01 pdf
REF01/REF02/REF03
REF03 SPECIFICATIONS
VIN = 15 V, −40°C TA +85°C, ILOAD = 0 mA, unless otherwise noted.
Parameter
OUTPUT VOLTAGE
OUTPUT ADJUSTMENT RANGE1
INITIAL ACCURACY
Symbol
VO
ΔVTRIM
VOERR
Conditions
POT = 10 kΩ
TEMPERATURE COEFFICIENT
LINE REGULATION2
LOAD REGULATION2
DROPOUT VOLTAGE
QUIESCENT CURRENT
LOAD CURRENT
Sourcing
Sinking
SHORT CIRCUIT TO GND
VOLTAGE NOISE
LONG-TERM STABILITY3
TURN-ON SETTLING TIME
TEMPERATURE SENSOR4
Voltage Output at TEMP Pin
Temperature Sensitivity
TCVO
∆VO/∆VIN
∆VO/∆ILOAD
VDO
IIN
ILOAD
VIN = 4.5 V to 33 V
ILOAD = 0 mA to 10 mA
ISC
eN p-p
∆VO
tR
VTEMP
TCVTEMP
VO = 0 V
0.1 Hz to 10.0 Hz
After 1000 hours of operation
Output settling to within ±0.1% of final value
Min
2.495
±6
Typ
2.500
±11
10
20
60
1.0
Max
2.515
±15
±0.6
50
50
100
2
1.4
Unit
V
%
mV
%
ppm/°C
ppm/V
ppm/mA
V
mA
10 mA
−0.3 mA
24 mA
6 μV p-p
50 ppm
5 μs
580 mV
1.96 mV/°C
1 Refer to the Output Adjustment section.
2 Specification includes the effects of self-heating.
3 Long-term stability is noncumulative; the drift in subsequent 1000-hour periods is significantly lower than in the first 1000-hour periods. Refer to Application Note AN-713.
4 Refer to the Temperature Monitoring section.
Rev. K | Page 5 of 20

5 Page





REF01 arduino
VOUT 5V/DIV
10V
8V
NO LOAD CAPACITOR
NO INPUT CAPACITOR
TIME (2ms/DIV)
Figure 25. REF02 Line Transient Response
NO LOAD CAPACITOR
VIN 5V/DIV
LOAD OFF
LOAD ON
VOUT 100mV/DIV
LOAD = 5mA
TIME (1ms/DIV)
Figure 26. REF02 Load Transient Response
CLOAD = 100nF
VIN 5V/DIV
LOAD OFF
LOAD ON
VOUT 100mV/DIV
LOAD = 5mA
TIME (1ms/DIV)
Figure 27. REF02 Load Transient Response
REF01/REF02/REF03
CIN = 0.01µF
NO LOAD CAPACITOR
VIN 10V/DIV
VOUT 5V/DIV
TIME (4µs/DIV)
Figure 28. REF02 Turn-Off Response
CIN = 0.01µF
NO LOAD CAPACITOR
VIN 10V/DIV
VOUT 5V/DIV
TIME (4µs/DIV)
Figure 29. REF02 Turn-On Response
CL = 0.01µF
NO INPUT CAPACITOR
VIN 10V/DIV
VOUT 5V/DIV
TIME (4µs/DIV)
Figure 30. REF02 Turn-Off Response (No Input Capacitor)
Rev. K | Page 11 of 20

11 Page







PáginasTotal 20 Páginas
PDF Descargar[ Datasheet REF01.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
REF01Voltage ReferenceAnalog Devices
Analog Devices
REF01Precision Voltage ReferencesMaxim Integrated Products
Maxim Integrated Products
REF01Voltage ReferenceCalogic
Calogic
REF01Voltage ReferencePMI
PMI

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar