|
|
PDF P87LPC767FN Data sheet ( Hoja de datos )
| Número de pieza | P87LPC767FN | |
| Descripción | Low power/ low price/ low pin count 20 pin microcontroller with 4-kbyte OTP and 8-bit A/D converter | |
| Fabricantes | NXP Semiconductors | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de P87LPC767FN (archivo pdf) en la parte inferior de esta página. Total 60 Páginas | ||
|
No Preview Available !
INTEGRATED CIRCUITS
87LPC767
Low power, low price, low pin count
(20 pin) microcontroller with 4-kbyte OTP
and 8-bit A/D converter
Product data
Supersedes data of 2001 Jun 12
IC28 Data Handbook
2001 Aug 07
Philips
Semiconductors
1 page  
Philips Semiconductors
Low power, low price, low pin count (20 pin)
microcontroller with 4-kbyte OTP and 8-bit A/D converter
Product data
87LPC767
ORDERING INFORMATION
Type number
P87LPC767BN
P87LPC767BD
P87LPC767FN
P87LPC767FD
P87LPC767HD
Package
Name
DIP20
SO20
DIP20
SO20
SO20
Description
plastic dual in-line package; 20 leads (300 mil)
plastic small outline package; 20 leads; body width 7.5 mm
plastic dual in-line package; 20 leads (300 mil)
plastic small outline package; 20 leads; body width 7.5 mm
plastic small outline package; 20 leads; body width 7.5 mm
PIN CONFIGURATION, 20-PIN DIP AND SO PACKAGES
LOGIC SYMBOL
CMP2/P0.0 1
P1.7 2
P1.6 3
RST/P1.5 4
VSS 5
X1/P2.1 6
X2/CLKOUT/P2.0 7
INT1/P1.4 8
SDA/INT0/P1.3 9
SCL/T0/P1.2 10
20 P0.1/CIN2B
19 P0.2/CIN2A
18 P0.3/CIN1B/AD0
17 P0.4/CIN1A/AD1
16 P0.5/CMPREF/AD2
15 VDD
14 P0.6/CMP1/AD3
13 P0.7/T1
12 P1.0/TxD
11 P1.1/RxD
SU01349
VDD
VSS
Version
SOT146-1
SOT163-1
SOT146-1
SOT163-1
SOT163-1
Temperature
Range (°C)
0 to +70
0 to +70
–40 to +85
–40 to +85
–40 to +125
AD0
AD1
AD2
AD3
CMP2
CIN2B
CIN2A
CIN1B
CIN1A
CMPREF
CMP1
T1
CLKOUT/X2
X1
TxD
RxD
T0
INT0
INT1
RST
SCL
SDA
SU01350
2001 Aug 07
2
5 Page 
Philips Semiconductors
Low power, low price, low pin count (20 pin)
microcontroller with 4-kbyte OTP and 8-bit A/D converter
Product data
87LPC767
FUNCTIONAL DESCRIPTION
Details of 87LPC767 functions will be described in the following
sections.
Enhanced CPU
The 87LPC767 uses an enhanced 80C51 CPU which runs at twice the
speed of standard 80C51 devices. This means that the performance of
the 87LPC767 running at 5 MHz is exactly the same as that of a
standard 80C51 running at 10 MHz. A machine cycle consists of 6
oscillator cycles, and most instructions execute in 6 or 12 clocks. A
user configurable option allows restoring standard 80C51 execution
timing. In that case, a machine cycle becomes 12 oscillator cycles.
In the following sections, the term “CPU clock” is used to refer to the
clock that controls internal instruction execution. This may
sometimes be different from the externally applied clock, as in the
case where the part is configured for standard 80C51 timing by
means of the CLKR configuration bit or in the case where the clock
is divided down via the setting of the DIVM register. These features
are described in the Oscillator section.
Analog Functions
The 87LPC767 incorporates analog peripheral functions: an Analog
to Digital Converter and two Analog Comparators. In order to give
the best analog function performance and to minimize power
consumption, pins that are being used for analog functions must
have the digital outputs and inputs disabled.
Digital outputs are disabled by putting the port output into the Input
Only (high impedance) mode as described in the I/O Ports section.
Digital inputs on port 0 may be disabled through the use of the
PT0AD register. Each bit in this register corresponds to one pin of
Port 0. Setting the corresponding bit in PT0AD disables that pin’s
digital input. Port bits that have their digital inputs disabled will be
read as 0 by any instruction that accesses the port.
Analog to Digital Converter
The 87LPC767 incorporates a four channel, 8-bit A/D converter. The
A/D inputs are alternate functions on four port 0 pins. Because the
device has a very limited number of pins, the A/D power supply and
references are shared with the processor power pins, VDD and VSS.
The A/D converter operates down to a VDD supply of 3.0 V.
The A/D converter circuitry consists of a 4-input analog multiplexer
and an 8-bit successive approximation ADC. The A/D employs a
ratiometric potentiometer which guarantees DAC monotonicity.
The A/D converter is controlled by the special function register
ADCON. Details of ADCON are shown in Figure 2. The A/D must be
enabled by setting the ENADC bit at least 10 microseconds before a
conversion is started, to allow time for the A/D to stabilize. Prior to
the beginning of an A/D conversion, one analog input pin must be
selected for conversion via the AADR1 and AADR0 bits. These bits
cannot be changed while the A/D is performing a conversion.
An A/D conversion is started by setting the ADCS bit, which remains
set while the conversion is in progress. When the conversion is
complete, the ADCS bit is cleared and the ADCI bit is set. When
ADCI is set, it will generate an interrupt if the interrupt system is
enabled, the A/D interrupt is enabled (via the EAD bit in the IE1
register), and the A/D interrupt is the highest priority pending
interrupt.
When a conversion is complete, the result is contained in the
register DAC0. This value will not change until another conversion is
started. Before another A/D conversion may be started, the ADCI bit
must be cleared by software. The A/D channel selection may be
changed by the same instruction that sets ADCS to start a new
conversion, but not by the same instruction that clears ADCI.
The connections of the A/D converter are shown in Figure 3.
The ideal A/D result may be calculated as follows:
Result + (VIN–VSS) x
256
VDD–VSS
(round result to the nearest integer)
2001 Aug 07
8
11 Page | ||
| Páginas | Total 60 Páginas | |
| PDF Descargar | [ Datasheet P87LPC767FN.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| P87LPC767FD | Low power/ low price/ low pin count 20 pin microcontroller with 4-kbyte OTP and 8-bit A/D converter | NXP Semiconductors |
| P87LPC767FN | Low power/ low price/ low pin count 20 pin microcontroller with 4-kbyte OTP and 8-bit A/D converter | NXP Semiconductors |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |