DataSheet.es    


PDF TGL41-200 Data sheet ( Hoja de datos )

Número de pieza TGL41-200
Descripción SURFACE MOUNT TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR
Fabricantes General Semiconductor 
Logotipo General Semiconductor Logotipo



Hay una vista previa y un enlace de descarga de TGL41-200 (archivo pdf) en la parte inferior de esta página.


Total 4 Páginas

No Preview Available ! TGL41-200 Hoja de datos, Descripción, Manual

TGL41-6.8 THRU TGL41-200A
SURFACE MOUNT TRANSZORB™ TRANSIENT VOLTAGE SUPPRESSOR
Breakdown Voltage - 6.8 to 200 Volts Peak Pulse Power - 400 Watts
DO-213AB
SOLDERABLE ENDS
1st BAND
D2 D1=
0.105
0.095
(2.67)
(2.41)
0.022 (0.56)
0.018 (0.46)
0.205 (5.2)
0.185(4.7)
D2
=
D1
+
-
0
0.008
(0.20)
1st band denotes type and positive end (cathode)
Dimensions in inches and (millimeters)
Available in uni-directional only
FEATURES
Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
For surface mounted applications
Glass passivated junction
Excellent clamping capability
Low incremental surge resistance
Fast response time typically less than 1.0ps from
0 Volts to V(BR)
400W peak pulse capability with a 10/1000µs waveform,
repetition rate (duty cycle): 0.01%
For devices with V(BR)10V, ID are typically less
than 1.0µA
High temperature soldering guaranteed:
250°C/10 seconds at terminals
MECHANICAL DATA
Case: JEDEC DO-213AB molded plastic body over
passivated junction
Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
Polarity: Blue bands denotes the cathode which is positive
with respect to the anode under normal TVS operation
Mounting Position: Any
Weight: 0.116 gram, 0.0046 ounce
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
RATINGS
Peak pulse power dissipation with a
10/1000µs waveform (NOTE 1, FIG. 1)
Steady state power dissipation at TL=75°C (NOTE 2)
Peak pulse current with a 10/1000µs waveform
(NOTE 1, FIG. 3)
Peak forward surge current, 8.3ms single half
sine-wave superimposed on rated load for unidirectional only
(JEDEC Method) (NOTE 3)
Maximum instantaneous forward voltage at 25A
for unidirectional only
Operating junction and storage temperature range
SYMBOL
PPPM
PM(AV)
IPPM
IFSM
VF
TJ, TSTG
VALUE
Minimum 400
1.0
SEE TABLE 1
40.0
3.5
-55 to +150
UNITS
Watts
Watt
Amps
Amps
Volts
°C
NOTES:
(1) Non-repetitive current pulse, per Fig. 3 and derated above TA=25°C per Fig. 2
(2) Mounted on copper pads to each terminal of 0.31 in2 (8.0 mm2) per Fig. 5
(3) Measured at 8.3ms single half sine-wave or equivalent square wave duty cycle=4 pulses per minute maximum
1/20/99

1 page





PáginasTotal 4 Páginas
PDF Descargar[ Datasheet TGL41-200.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
TGL41-20SURFACE MOUNT TRANSZORB TRANSIENT VOLTAGE SUPPRESSORGeneral Semiconductor
General Semiconductor
TGL41-20Surface Mount unidirectional and bidirectional Transient Voltage Suppressor DiodesDiotec Semiconductor
Diotec Semiconductor
TGL41-20500 Watt Transient Voltage SuppressorMicrosemi Corporation
Microsemi Corporation
TGL41-200SURFACE MOUNT TRANSZORB TRANSIENT VOLTAGE SUPPRESSORGeneral Semiconductor
General Semiconductor

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar