DataSheet.es    


PDF TES150YE-A Data sheet ( Hoja de datos )

Número de pieza TES150YE-A
Descripción Very High Efficiency
Fabricantes Power-One 
Logotipo Power-One Logotipo



Hay una vista previa y un enlace de descarga de TES150YE-A (archivo pdf) en la parte inferior de esta página.


Total 3 Páginas

No Preview Available ! TES150YE-A Hoja de datos, Descripción, Manual

(888) IPD-CONVerters q (888) 473-2668 q www.ipdconverters.com
TES SERIES - 225 WATT
DESCRIPTION
FEATURES
TES single output DC/DC converters provide up to
225 Watts of output power at up to 45 Amperes of
output current in an industry standard “3/4 brick”
package. The TES converters feature open-frame
packaging, along with planar magnetics and a high
efficiency topology, to provide maximum useable
power density. The TES converters use 100% surface-
mount construction and are fully compatible with
production board washing processes.
• 45A “3/4 Brick”
• Very High Efficiency
• Open-Frame Packaging
• 100°C Baseplate
Operation
• Planar Magnetics
• Low Voltage Outputs
• 1500V Isolation
• Synchronous
Rectification
TECHNICAL SPECIFICATIONS
Voltage Range
24 VDC Nominal
48 VDC Nominal
Input
Output
Setpoint Accuracy
Line Regulation Vin Min. - Vin Max., Iout Rated
Load Regulation Iout Min. - Iout Max., Vin Nom.
Remote Sense Headroom
Minimum Output Current
Dynamic Regulation, Loadstep
Pk Deviation
Settling Time
Voltage Trim Range
Current Limit Type
Current Limit Threshold Range, % of Iout Rated
Short Circuit Threshold Range, % of Iout Rated
OVP Trip Range
UVP Trip Range
OVP/UVP Type
General
Turn-On Time
Remote Shutdown
Remote Shutdown Reference
Switching Frequency 5Vout / 3.3V & 2.5Vout
Isolation
Input - Output
Input - Case
Output - Case
Temperature Coefficient
Case Temperature
Operating Range
Storage Range
Thermal Shutdown Range
Vibration, 3 Axes, 5 Min Each
MTBF(Bellcore TR-NWT-000332)
Safety
Weight (Approx.)
18 - 36 VDC
36 - 72 VDC
±1%
0.2% Vout
0.5% Vout
0.5 VDC
10 % Iout Rated
25% Iout
4% Vout
500 µs
±10%
Latch
110 - 140%
200%
115 - 140% Vout Nom.
70 - 90% Vout Nom.
Latch
10 ms
Positive Logic
Vin Negative
300 kHz / 200 kHz
1500 VDC
1050 VDC
500 VDC
±0.02%/°C
-40 To +100°C
-40 To +125°C
105 to 115°C
5 g, 10 - 55 Hz
1.0 X 106 hrs
UL, CUL, TUV
3.3 oz
C-52
Efficiency vs. Load (48V Input)
95
90
85
80
TES150ZE-A
75
EFF. (36v)
70
EFF. (48v)
65 EFF. (75v)
60
55
10 20 30 40 50 60 70 80 90 100
LOAD %
Notes
MTBF predictions may vary slightly from model to model.
Specifications typically at 25°C, normal line, and full load, unless otherwise stated.
Soldering Conditions: I/O pins, 260°C, ten seconds; fully compatible with
commercial wave-soldering equipment.
Safety: Agency approvals may vary from model to model. Please consult factory
for specific model information.

1 page





PáginasTotal 3 Páginas
PDF Descargar[ Datasheet TES150YE-A.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
TES150YE-AVery High EfficiencyPower-One
Power-One

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar