|
|
Número de pieza | P80C51HFT | |
Descripción | Low voltage 8-bit microcontrollers with UART | |
Fabricantes | NXP Semiconductors | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de P80C51HFT (archivo pdf) en la parte inferior de esta página. Total 68 Páginas | ||
No Preview Available ! INTEGRATED CIRCUITS
DATA SHEET
P80CL31; P80CL51
Low voltage 8-bit microcontrollers
with UART
Product specification
Supersedes data of January 1995
File under Integrated circuits, IC20
1997 Apr 15
1 page Philips Semiconductors
Low voltage 8-bit microcontrollers with
UART
5 BLOCK DIAGRAM
Product specification
P80CL31; P80CL51
1997 Apr 15
5
5 Page Philips Semiconductors
Low voltage 8-bit microcontrollers with
UART
Product specification
P80CL31; P80CL51
8 FUNCTIONAL DESCRIPTION OVERVIEW
This chapter gives a brief overview of the device.
The detailed functional description is in the following
chapters as follows:
Chapter 9 “Memory organization”
Chapter 10 “I/O facilities”
Chapter 11 “Timers/event counters”
Chapter 12 “Reduced power modes”
Chapter 13 “Standard serial interface SIO0: UART”
Chapter 14 “Interrupt system”
Chapter 15 “Oscillator circuitry”
Chapter 16 “Reset”.
8.1 General
The P80CLx1 is a stand-alone high-performance CMOS
microcontroller designed for use in real-time applications
such as instrumentation, industrial control, intelligent
computer peripherals and consumer products.
The device provides hardware features, architectural
enhancements and new instructions to function as a
controller for applications requiring up to 64 kbytes of
Program Memory and/or up to 64 kbytes of Data Memory.
The P80CLx1 contains 4 kbytes Program Memory (ROM;
P80CL51 only); a static 128 bytes Data Memory (RAM);
32 I/O lines; two16-bit timer/event counters;
a thirteen-source, two priority-level, nested interrupt
structure and on-chip oscillator and timing circuit.
A standard UART serial interface is also provided.
The device has two software-selectable modes of reduced
activity for power reduction:
• Idle mode; freezes the CPU while allowing the timers,
serial I/O and interrupt system to continue functioning.
• Power-down mode; saves the RAM contents but
freezes the oscillator causing all other chip functions to
be inoperative.
8.2 CPU timing
A machine cycle consists of a sequence of 6 states. Each
state lasts for two oscillator periods, thus a machine cycle
takes 12 oscillator periods or 1 µs if the oscillator
frequency (fosc) is 12 MHz.
1997 Apr 15
11
11 Page |
Páginas | Total 68 Páginas | |
PDF Descargar | [ Datasheet P80C51HFT.PDF ] |
Número de pieza | Descripción | Fabricantes |
P80C51HFH | Low voltage 8-bit microcontrollers with UART | NXP Semiconductors |
P80C51HFP | Low voltage 8-bit microcontrollers with UART | NXP Semiconductors |
P80C51HFT | Low voltage 8-bit microcontrollers with UART | NXP Semiconductors |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |