DataSheet.es    


PDF TIC225M Data sheet ( Hoja de datos )

Número de pieza TIC225M
Descripción SILICON TRIACS
Fabricantes Power Innovations Limited 
Logotipo Power Innovations Limited Logotipo



Hay una vista previa y un enlace de descarga de TIC225M (archivo pdf) en la parte inferior de esta página.


Total 6 Páginas

No Preview Available ! TIC225M Hoja de datos, Descripción, Manual

Copyright © 1997, Power Innovations Limited, UK
TIC225 SERIES
SILICON TRIACS
JULY 1975 - REVISED MARCH 1997
q Sensitive Gate Triacs
q 8 A RMS, 70 A Peak
q Glass Passivated Wafer
q 400 V to 800 V Off-State Voltage
q Max IGT of 5 mA (Quadrant 1)
MT1
MT2
G
TO-220 PACKAGE
(TOP VIEW)
1
2
3
Pin 2 is in electrical contact with the mounting base.
MDC2ACA
absolute maximum ratings over operating case temperature (unless otherwise noted)
RATING
TIC225D
Repetitive peak off-state voltage (see Note 1)
TIC225M
TIC225S
TIC225N
Full-cycle RMS on-state current at (or below) 70°C case temperature (see Note 2)
Peak on-state surge current full-sine-wave (see Note 3)
Peak on-state surge current half-sine-wave (see Note 4)
Peak gate current
Peak gate power dissipation at (or below) 85°C case temperature (pulse width 200 µs)
Average gate power dissipation at (or below) 85°C case temperature (see Note 5)
Operating case temperature range
Storage temperature range
Lead temperature 1.6 mm from case for 10 seconds
SYMBOL
VDRM
IT(RMS)
ITSM
ITSM
IGM
PGM
PG(AV)
TC
Tstg
TL
VALUE
400
600
700
800
8
70
80
±1
2.2
0.9
-40 to +110
-40 to +125
230
UNIT
V
A
A
A
A
W
W
°C
°C
°C
NOTES: 1. These values apply bidirectionally for any value of resistance between the gate and Main Terminal 1.
2. This value applies for 50-Hz full-sine-wave operation with resistive load. Above 70°C derate linearly to 110°C case temperature at
the rate of 200 mA/°C.
3. This value applies for one 50-Hz full-sine-wave when the device is operating at (or below) the rated value of on-state current.
Surge may be repeated after the device has returned to original thermal equilibrium. During the surge, gate control may be lost.
4. This value applies for one 50-Hz half-sine-wave when the device is operating at (or below) the rated value of on-state current.
Surge may be repeated after the device has returned to original thermal equilibrium. During the surge, gate control may be lost.
5. This value applies for a maximum averaging time of 20 ms.
electrical characteristics at 25°C case temperature (unless otherwise noted)
PARAMETER
IDRM
Repetitive peak
off-state current
VD = rated VDRM
IGTM
Peak gate trigger
current
VGTM
Peak gate trigger
voltage
Vsupply = +12 V†
Vsupply = +12 V†
Vsupply = -12 V†
Vsupply = -12 V†
Vsupply = +12 V†
Vsupply = +12 V†
Vsupply = -12 V†
Vsupply = -12 V†
† All voltages are with respect to Main Terminal 1.
TEST CONDITIONS
IG = 0
RL = 10
RL = 10
RL = 10
RL = 10
RL = 10
RL = 10
RL = 10
RL = 10
TC = 110°C
tp(g) > 20 µs
tp(g) > 20 µs
tp(g) > 20 µs
tp(g) > 20 µs
tp(g) > 20 µs
tp(g) > 20 µs
tp(g) > 20 µs
tp(g) > 20 µs
MIN TYP MAX UNIT
0.8
-4.5
-3.5
11.7
0.7
-0.7
-0.8
0.9
±2
5
-20
-10
30
2
-2
-2
2
mA
mA
V
PRODUCT INFORMATION
Information is current as of publication date. Products conform to specifications in accordance
with the terms of Power Innovations standard warranty. Production processing does not
necessarily include testing of all parameters.
1

1 page




TIC225M pdf
TIC225 SERIES
SILICON TRIACS
JULY 1975 - REVISED MARCH 1997
MECHANICAL DATA
TO-220
3-pin plastic flange-mount package
This single-in-line package consists of a circuit mounted on a lead frame and encapsulated within a plastic
compound. The compound will withstand soldering temperature with no deformation, and circuit performance
characteristics will remain stable when operated in high humidity conditions. Leads require no additional
cleaning or processing when used in soldered assembly.
TO220
ø
3,96
3,71
see Note B
10,4
10,0
2,95
2,54
4,70
4,20
1,32
1,23
6,6
6,0
15,90
14,55
see Note C
6,1
3,5
0,97
0,61
123
1,70
1,07
2,74
2,34
5,28
4,88
14,1
12,7
0,64
0,41
2,90
2,40
VERSION 1
ALL LINEAR DIMENSIONS IN MILLIMETERS
NOTES: A. The centre pin is in electrical contact with the mounting tab.
B. Mounting tab corner profile according to package version.
C. Typical fixing hole centre stand off height according to package version.
Version 1, 18.0 mm. Version 2, 17.6 mm.
VERSION 2
PRODUCT INFORMATION
MDXXBE
5

5 Page










PáginasTotal 6 Páginas
PDF Descargar[ Datasheet TIC225M.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
TIC225SILICON TRIACSPower Innovations Limited
Power Innovations Limited
TIC225A(TIC225x) SILICON BIDIRECTIONAL TRIODE THYRISTORComset Semiconductors
Comset Semiconductors
TIC225B(TIC225x) SILICON BIDIRECTIONAL TRIODE THYRISTORComset Semiconductors
Comset Semiconductors
TIC225C(TIC225x) SILICON BIDIRECTIONAL TRIODE THYRISTORComset Semiconductors
Comset Semiconductors

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar