DataSheet.es    

PDF P6KE6.8 Datasheet ( Hoja de datos )

Número de pieza P6KE6.8
Descripción TRANSIENT VOLTAGE SUPPRESSOR
Fabricantes Shanghai Sunrise Electronics 
Logotipo Shanghai Sunrise Electronics Logotipo

Total 4 Páginas
		
P6KE6.8 Hoja de datos, Descripción, Manual
SHANGHAI SUNRISE ELECTRONICS CO
P6KE6.8 THRU P6KE440CA
TRANSIENT VOLTAGE SUPPRESSOR
BREAKDOWN VOLTAGE:6.8-440V
PEAK PULSE POWER: 600W
TECHNICAL
SPECIFICATION
FEATURES
• 600W peak pulse power capability
• Excellent clamping capability
• Low incremental surge resistance
• Fast response time:
typically less than 1.0ps from 0V to VBR
for unidirectional and 5.0nS for bidirectional types.
• High temperature soldering guaranteed:
265oC/10S/9.5mm lead length at 5 lbs tension
MECHANICAL DATA
• Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
• Case: Molded with UL-94 Class V-O recognized
flame retardant epoxy
• Polarity: Color band denotes cathode except for
unidirectional types.
• Mounting position: Any
DO-15
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(Ratings at 25oC ambient temperature unless otherwise specified)
RATINGS
SYMBOL
VALUE
Peak power dissipation
(Note 1)
Pppm
Minimum 600
Peak pulse reverse current
(Note 1)
Ippm
See Table
Steady state power dissipation
(Note 2) Pm(av)
2.0
Peak forward surge current
(Note 3)
IFSM
100
Maximum instantaneous forward voltage at 50A
for unidirectional only
(Note 4)
VF
3.5/5.0
Operating junction and storage temperature range
TSTG,TJ
-55 to + 175
Notes:
1. 10/1000µS waveform non-repetitive current pulse, and derated above Ta=25oC
2. Tl=75oC, lead length 9.5mm, Mounted on copper pad area of (20×20mm)
3. Measured on 8.3ms single half sine-wave or equivalent square wave,duty cycle=4 pulses per minu
4. VF=3.5V max. for devices of V(BR) 200V, and VF=5.0V max. for devices of V(BR) >200V
DEVICES FOR BIDIRECTIONAL APPLICATIONS
1. Suffix 'A' dnotes 5% tolerance device,no suffix 'A' dnotes 10% tolerance device.
2. For bidirectional use 'C' or 'CA' suffix for types P6KE6.8 thru types P6KE440A
(e.g. P6KE7.5C, P6KE440CA), for unidirectional don't use 'C' suffix after types.
3. For bidirectional devices having VWM of 10 volts and less, the ID limit is doubled.
4. Electrical characteristics apply in both directions.
http://www.sse-

1 page


PáginasTotal 4 Páginas
PDF Descargar[ P6KE6.8.PDF ]

Enlace url


Hoja de datos destacado

Número de piezaDescripciónFabricantes
P6KE6.0Diode TVS Single Uni-Dir 5.8V 600W 2-Pin DO-15New Jersey Semiconductor
New Jersey Semiconductor
P6KE6.0ADiode TVS Single Uni-Dir 5.8V 600W 2-Pin DO-15New Jersey Semiconductor
New Jersey Semiconductor
P6KE6.0CDiode TVS Single Uni-Dir 5.8V 600W 2-Pin DO-15New Jersey Semiconductor
New Jersey Semiconductor
P6KE6.5CDiode TVS Single Uni-Dir 5.8V 600W 2-Pin DO-15New Jersey Semiconductor
New Jersey Semiconductor

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


www.DataSheet.es    |   2018   |  Privacy Policy  |  Contacto  |  Buscar