DataSheet.es    


PDF V23818-C18-L436 Data sheet ( Hoja de datos )

Número de pieza V23818-C18-L436
Descripción Small Form Factor Single Mode 1300 nm Multirate up to 155 Mbit/s Transceiver 2x5 Pinning with LC Connector
Fabricantes Infineon Technologies 
Logotipo Infineon Technologies Logotipo



Hay una vista previa y un enlace de descarga de V23818-C18-L436 (archivo pdf) en la parte inferior de esta página.


Total 17 Páginas

No Preview Available ! V23818-C18-L436 Hoja de datos, Descripción, Manual

Fiber Optics
Small Form Factor
Single Mode 1300 nm
Multirate up to 155 Mbit/s Transceiver
2x5 Pinning with LC™ Connector
V23818-C18-Lxx/L4xx
Features
• Small Form Factor transceiver
• Multisource 2x5 footprint, SFF MSA compliant1)
• Small footprint for high port density
• RJ-45 style LC™ connector system
• Half the size of SC Duplex 1x9 transceiver
• Single power supply (3.3 V)
• Extremely low power consumption, 600 mW typical
• Leading performance for receiver sensitivity,
–34 dBm typical
• Loss of optical signal indicator
• Laser disable, LVTTL input
• LVPECL differential inputs and outputs
• Suitable for multirate applications up to 155 Mbit/s
– Fast Ethernet (FE) compatible
• Class 1 FDA and IEC laser safety compliant
• UL 94 V-0 certified
• Compliant with FCC (Class B) and EN 55022
• Distance up to 15 km/21 km on single mode fiber
(SMF)2)
File: 1119
File: 1120
1) Current MSA documentation can be found at www.infineon.com/fiberoptics.
2) IR (Intermediate Reach): up to 15 km (ITU-T G.957), up to 21 km (Telcordia GR-253).
For ordering information see next page.
LCTM is a trademark of Lucent.
Data Sheet
1
2003-06-06

1 page




V23818-C18-L436 pdf
V23818-C18-Lxx/L4xx
Description
Description
This data sheet describes the Infineon single mode ATM transceiver, which complies
with the ATM Forum’s Network Compatible ATM for Local Network Applications
document and ANSI’s Broadband ISDN - Customer Installation Interfaces, Physical
Media Dependent Specification, T1E1.2, compliant to SONET OC-3, IR-1 (Telcordia
GR-253-CORE) and SDH STM-1/S-1.1 (ITU-T G.957).
This transceiver is also suitable for multirate applications. The performance at lower
datarates may vary from application to application and is link dependent. Refer to
Infineon Application Note 97 for more information.
ATM was developed to facilitate solutions in multimedia applications and real time
transmission. The data rate is scalable, and the ATM protocol is the basis of the
broadband public networks being standardized in the International Telecommunications
Union (ITU), the former International Telegraph and Telephone Consultative Committee
(CCITT). ATM can also be used in local private applications.
The Infineon single mode ATM transceiver is a single unit comprised of a transmitter, a
receiver, and an LC receptacle. This design frees the customer from many alignment
and PC board layout concerns. The module is designed for low cost LAN and WAN
applications. It can be used as the network end device interface in workstations, servers,
and storage devices, and in a broad range of network devices such as bridges, routers,
and intelligent hubs, as well as local and wide area ATM switches.
This transceiver operates at up to 155.520 Mbit/s from a single power supply (+3.3 V).
The full differential data inputs and outputs are LVPECL compatible.
Data Sheet 5 2003-06-06

5 Page





V23818-C18-L436 arduino
V23818-C18-Lxx/L4xx
Technical Data
Receiver Electro-Optical Characteristics
Receiver
Symbol
Limit Values
Unit
min.
typ.
max.
Sensitivity (Average Power)1)
Saturation (Average Power)
Signal Detect Assert Level2)
Signal Detect Deassert Level3)
Signal Detect Hysteresis
Signal Detect Assert Time
Signal Detect Deassert Time
Data Output High Voltage
DC/DC 4)
PIN
PSAT
PSDA
PSDD
PSDA
–PSDD
tASS
tDAS
VOHVCC
–8
–45
–1110
–34
3
–29
–29
100
350
–650
dBm
dBm
dBm
dBm
dB
µs
µs
mV
Differential Data Output Voltage VODpk-pk 1000
Swing AC/AC
2000
mV
Data Output Low Voltage
DC/DC4)
VOLVCC –1800
–1300 mV
Signal Detect Output High
Voltage LVPECL5) 6)
VSDHVEE VCC
–1200
VCC
–820
mV
Signal Detect Output Low
Voltage LVPECL5) 6)
VSDLVEE VCC
–1900
VCC
–1580
mV
Signal Detect Output High
Voltage LVTTL5) 7)
VSDH
2.4
V
Signal Detect Output Low
Voltage LVTTL5) 7)
VSDL
0.5 V
Output Data Rise/Fall Time,
20% - 80%
tR, tF
1 ns
Output SD Rise/Fall Time
tR, tF
40 ns
1) Minimum average optical power at which the BER is less than 1x10–10. Measured with a 223–1 NRZ PRBS.
Worst case receiver sensitivity at 25°C is –31 dBm (beginning of life).
2) An increase in optical power of data signal above the specified level will cause the Signal Detect to switch from
a low state to a high state (high active output).
3) A decrease in optical power of data signal below the specified level will cause the Signal Detect to switch from
a high state to a low state.
4) Load is 100 differential.
5) Measured under DC conditions at 25°C. For dynamic measurements a tolerance of 50 mV should be added.
6) Only for V23818-C18-L3x/L436.
7) Only for V23818-C18-L4x.
Data Sheet 11 2003-06-06

11 Page







PáginasTotal 17 Páginas
PDF Descargar[ Datasheet V23818-C18-L436.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
V23818-C18-L436Small Form Factor Single Mode 1300 nm Multirate up to 155 Mbit/s Transceiver 2x5 Pinning with LC ConnectorInfineon Technologies
Infineon Technologies

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar