DataSheet.es    


PDF USB6B Data sheet ( Hoja de datos )

Número de pieza USB6B
Descripción TVSarray Series
Fabricantes Microsemi Corporation 
Logotipo Microsemi Corporation Logotipo



Hay una vista previa y un enlace de descarga de USB6B (archivo pdf) en la parte inferior de esta página.


Total 2 Páginas

No Preview Available ! USB6B Hoja de datos, Descripción, Manual

8700 E. Thomas Road
Scottsdale, AZ 85252
Tel: (480) 941-6300
Fax: (480) 947-1503
USB6B1
DESCRIPTION (500 watt)
This TRANSIENT VOLTAGE SUPPRESSOR (TVS) array is packaged
in a SO-8 configuration giving protection to one pair of Bidirectional
data lines and the Vbus. It is designed for use in applications where
protection is required at the board level from voltage transients caused
by electrostatic discharge (ESD) as defined in IEC 1000-4-2, electrical
fast transients (EFT) per IEC 1000-4-4 and effects of secondary
lighting.
TVSarraySeries
These TVS arrays have a peak power rating of 500 watts for an
8/20µsec pulse. This array is designed for protection of sensitive
circuitry consisting of UNIVERSAL SERIAL BUS (USB) I/O transceivers.
The capacitance between the I/O data lines are minimal too ensure no significant signal distortion or loss at
the 12 Megabit or greater data rate. This feature allows full compatibility with USB port standards.
FEATURES
500 watt Peak Pulse Power protection at 8/20 µsec
threat.
Protects each data line and between Vbus supply and
ground
Complies with MIL STD 883C Method 3015.7 class 3
Protection Per IEC 1000-4-2, IEC 1000-4-4
Provides electrically isolated protection
ULTRA LOW CAPACITANCE 5 pF line to ground
ULTRA LOW CAPACITANCE 3.5 pF line to line
ULTRA LOW STANDBY CURRENT
MAXIMUM RATINGS
Operating Temperatures: -550C to +1500C
Storage Temperature: -550C to +1500C
Peak Pulse Power: 500 Watts (8/20 µsec, Figure 1
and 2)
Pulse Repetition Rate: <.01%
MECHANICAL
Molded SO-8 Packaging
Lead solder temperature (10 sec duration) 260ºC
Weight: 0.066 grams (approximate)
Marked with logo and marking code
Pin 1 indicated by dot on top of package
Encapsulation meets UL 94V-0
PACKAGING
Tape & Reel EIA Standard 481-1-A
13 inch reel 2,500, pieces (OPTIONAL)
Carrier tubes 95 pcs per (STANDARD)
ELECTRICAL CHARACTERISTICS PER LINE @ 250C Unless otherwise specified
PART
NUMBER
DEVICE
MARKING
STAND
OFF
VOLTAG
E
VWM
VOLTS
BREAKDOWN
VOLTAGE
VBR
@1 mA
VOLTS
CLAMPING
VOLTAGE
VC
@ 1 Amp
(FIGURE 2)
VOLTS
CLAMPING
VOLTAGE
VC
@ 5 Amp
(FIGURE 2)
VOLTS
STANDBY
CURRENT
ID
@ VWM
µA
CAPACITANCE
(f=1 MHz)
@0V
C
Data + To Data -
pF
MAX
MIN
MAX
MAX
MAX
TYP
USB6B1
USB6
5.0
6.0
9.8
18 5
15
TEMPERATURE
COEFFICIENT
of VBR
áV(BR)
mV/°C
MAX
3
MSC1068.PDF
ISO 9001 CERTIFIED
REV E 7/07/2000

1 page





PáginasTotal 2 Páginas
PDF Descargar[ Datasheet USB6B.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
USB6BTVSarray SeriesMicrosemi Corporation
Microsemi Corporation
USB6B1TVSarray SeriesMicrosemi Corporation
Microsemi Corporation
USB6B1DATA LINES PROTECTIONSTMicroelectronics
STMicroelectronics
USB6B1RLDATA LINES PROTECTIONSTMicroelectronics
STMicroelectronics

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar