DataSheet.es    


PDF VENUS-QP1S Data sheet ( Hoja de datos )

Número de pieza VENUS-QP1S
Descripción CDMA/AMPS Dual Band RF Receiver
Fabricantes Mitel Networks Corporation 
Logotipo Mitel Networks Corporation Logotipo



Hay una vista previa y un enlace de descarga de VENUS-QP1S (archivo pdf) en la parte inferior de esta página.


Total 7 Páginas

No Preview Available ! VENUS-QP1S Hoja de datos, Descripción, Manual

VENUS-L
CDMA/AMPS Dual Band RF Receiver
Preliminary Information
DS5082
Issue 2.1 J
June 1999
Features
q Selectable dual RF input ports for 900MHz AMPS
and 1900MHz CDMA bands.
q Power Management Control
Ordering Iinformation
VENUS-L/KG/QP1S
VENUS-L/KG/QP1T
Description
VENUS-L is a dual integrated mixer circuit designed to
meet the IS95 and J-STD-008 receive system specifica-
tions operating in the 900 MHz and 1900MHz bands.
Venus-L is part of a complete chipset solution for CDMA
phones called the Planet chipset, and is built on a Mitel
advanced bipolar process with FT's of 25GHz.
RF 1900
RF 900
CONTROL
CDMA IF
CDMA IFB
AMPS IF
AMPS IFB
CHIP ENABLE
BAND 1900
Figure 2. Block diagram

1 page




VENUS-QP1S pdf
Preliminary Information
VENUS-L
Electrical Characteristics (AC specification ) Continued
T
desiAgMnB.
= -30°C to +70°C,
They apply within
V = +2.7 to
thCeCspecified
+3.6V.
ambient
These characteristics are guaranteed by either
temperature and supply voltage ranges unless
production test or
otherwise stated.
Unless otherwise stated the frequencies used for measurements are to be.
900MHz Signal Path: RF = 881.5MHz, LO = 966.88MHz, IF = 85.38MHz.
Characteristic
900MHz Signal Path
Value
Min Typ Max
Overall Power Gain, RF input to IF
output
Noise Figure
7
89
9 11
Units
Conditions
Input=RF 900 Output=AMPS IF
and AMPS IFB
dB LO= -10dBm from a 50ohm
source
dB Total to IF outputs (SSB).
Input third order intercept point
RF Input impedance
Return Loss
RF Frequency
IF Frequency
Input 1dB compression
Load impedance
RF LO BUFFERS
LO feedthrough to IF outputs
LO feedthrough to RF inputs
LO input level
LO input impedance
LO port Return Loss
5 dBm
50 Ohm With simple external matching
network. Matching network must
include an inductor connected
between the RF 900 pin and GND.
15 dB With simple external matching
network. Matching network must
include an inductor connected
between the RF 900 pin and GND
800
1000
MHz
50 250 MHz
-8 dBm
850 Differential. Will require an
externa lresistor and a simple
external matching network.
-30 dBm
-40 dBm
-10 -5 dBm
50 With simple external matching
network
15 dB With simple external matching
network
5

5 Page










PáginasTotal 7 Páginas
PDF Descargar[ Datasheet VENUS-QP1S.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
VENUS-QP1SCDMA/AMPS Dual Band RF ReceiverMitel Networks Corporation
Mitel Networks Corporation
VENUS-QP1TCDMA/AMPS Dual Band RF ReceiverMitel Networks Corporation
Mitel Networks Corporation

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar