DataSheet.es    


PDF P6KE12A Data sheet ( Hoja de datos )

Número de pieza P6KE12A
Descripción TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR
Fabricantes General Semiconductor 
Logotipo General Semiconductor Logotipo



Hay una vista previa y un enlace de descarga de P6KE12A (archivo pdf) en la parte inferior de esta página.


Total 4 Páginas

No Preview Available ! P6KE12A Hoja de datos, Descripción, Manual

P6KE6.8 THRU P6KE440CA
TRANSZORB™ TRANSIENT VOLTAGE SUPPRESSOR
Breakdown Voltage - 6.8 to 440 Volts Peak Pulse Power- 600 Watts
DO-204AC
1.0
(25.4)
MIN.
0.034 (0.86)
0.028 (0.71)
DIA.
0.300 (7.6)
0.230 (5.8)
1.0
(25.4)
MIN.
0.140 (3.6)
0.104 (2.6)
DIA.
Dimensions in inches
and
(millimeters)
FEATURES
Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
Glass passivated junction
600W peak pulse power capability with a 10/1000µs
waveform, repetition rate (duty cycle): 0.01%
Excellent clamping
capability
Low incremental surge resistance
Fast response time: typically less
than 1.0ps from 0 Volts to V(BR) for
uni-directional and 5.0ns for bi-directional types
Typical ID less than 1µA above 10V
High temperature soldering guaranteed:
265°C/10 seconds, 0.375" (9.5mm) lead length,
5lbs. (2.3 kg) tension
MECHANICAL DATA
Case: JEDEC DO-204AC molded plastic body over
passivated junction
Terminals: Solder plated axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: For uni-directional types the color band denotes
the cathode, which is postitive with respect to the anode
under normal TVS operation
Mounting Position: Any
Weight: 0.015 ounce, 0.4 gram
DEVICES FOR BIDIRECTIONAL APPLICATIONS
For bi-directional use C or CA Suffix for types P6KE6.8 thru types P6KE440 (e.g. P6KE6.8C, P6KE440CA).
Electrical characteristics apply in both directions.
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Peak pulse power dissipation with a 10/1000µs
waveform (NOTE 1, FIG. 1)
Peak pulse current with a 10/1000µs waveform
(NOTE 1)
Steady state power dissipation at TL=75°C
lead lengths, 0.375" (9.5mm) (NOTE 2)
Peak forward surge current, 8.3ms single half
sine-wave superimposed on rated load
(JEDEC Method) unidirectional only (NOTE 3)
Maximum instantaneous forward voltage at 50.0A for
unidirectional only (NOTE 4)
Operating junction and storage temperature range
SYMBOL
PPPM
IPPM
PM(AV)
IFSM
VF
TJ, TSTG
VALUE
Minimum 600
SEE TABLE 1
5.0
100.0
3.5/5.0
-55 to +175
NOTES:
(1) Non-repetitive current pulse, per Fig. 3 and derated above TA=25°C per Fig. 2
(2) Mounted on copper pad area of 1.6 x 1.6” (40 x 40mm) per Fig. 5
(3) Measured on 8.3ms single half sine-wave or equivalent square wave duty cycle=4 pulses per minute maximum
(4) VF=3.5 Volt max. for devices of V(BR)220V, and VF=5.0V for devices of V(BR)>220V
UNITS
Watts
Amps
Watts
Amps
Volts
°C
1/21/99

1 page





PáginasTotal 4 Páginas
PDF Descargar[ Datasheet P6KE12A.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
P6KE12TRANSZORB TRANSIENT VOLTAGE SUPPRESSORGeneral Semiconductor
General Semiconductor
P6KE12TRANSIENT ABSORPTION ZENERMicrosemi Corporation
Microsemi Corporation
P6KE12TRANSIENT VOLTAGE SUPPRESSORS DIODEJinan Gude Electronic Device
Jinan Gude Electronic Device
P6KE12600W TRANSIENT VOLTAGE SUPPRESSORSWon-Top Electronics
Won-Top Electronics

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar