|
|
Número de pieza | XC4000D | |
Descripción | Logic Cell Array | |
Fabricantes | Xilinx | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de XC4000D (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! ® XC4010D, XC4013D
Logic Cell Array
Product Specifications
Features
• Third Generation Field-Programmable Gate Array
– Abundant flip-flops
– Flexible function generators
– No on-chip RAM
– Dedicated high-speed carry-propagation circuit
– Wide edge decoders (four per edge)
– Hierarchy of interconnect lines
– Internal 3-state bus capability
– Eight global low-skew clock or signal distribution
network
• Flexible Array Architecture
– Programmable logic blocks and I/O blocks
– Programmable interconnects and wide decoders
• Sub-micron CMOS Process
– High-speed logic and Interconnect
– Low power consumption
• Systems-Oriented Features
– IEEE 1149.1-compatible boundary-scan logic support
– Programmable output slew rate (2 modes)
– Programmable input pull-up or pull-down resistors
– 12-mA sink current per output
– 24-mA sink current per output pair
• Configured by Loading Binary File
– Unlimited reprogrammability
– Six programming modes
• XACT Development System runs on ’386/’486-type PC,
Apollo, Sun-4, and Hewlett-Packard 700 series
– Interfaces to popular design environments like
Viewlogic, Mentor Graphics and OrCAD
– Fully automatic partitioning, placement and routing
– Interactive design editor for design optimization
– 288 macros, 34 hard macros, RAM/ROM compiler
Description
The Xc4010D and XC4013D are RAM-less, lower-cost
versions of the XC4010 and XC4013. They are identical to
the XC4010 and XC4013 in all respects, except for the
missing on-chip RAM.
The XC4010D and XC4013D are available in most of the
same PLCC, PQFP, and PGA packages as their corre-
sponding XC4000 non-D equivalents. See page 2-70 for
details.
The XC4010D and XC4013D are also pin-compatible with
the XC5210 (see XC5200 Data Sheet for additional infor-
mation). The XC5210 provides another possible cost-re-
duction path for lower-performance applications that do not
use the XC4000D features like wide-decoders and carry
logic.
For complete electrical specifications, see pages 2-47
through 2-55.
For a detailed description of the device features, architec-
ture and configuration methods, see pages 2-9 through 2-
45.
For a detailed list of package printouts, please use the
cross-referance on page 2-70.
For package physical dimensions and thermal data, see
Section 4.
Table 1. The XC4000D Family of Field-Programmable Gate Arrays
Device
XC4010/10D XC4013/13D
Approximate Gate Count
CLB Matrix
Number of CLBs
Number of Flip-Flops
Max Decode Inputs (per side)
Max RAM Bits
Number of IOBs
10,000
20 x 20
400
1,120
60
12,800*
160
*XC4010D and XC4013D have no RAM
13,000
24 x 24
576
1,536
72
18,432*
192
2-69
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet XC4000D.PDF ] |
Número de pieza | Descripción | Fabricantes |
XC4000 | Logic Cell Array Family | Xilinx |
XC4000A | Logic Cell Array Family | Xilinx |
XC4000D | Logic Cell Array | Xilinx |
XC4000E | XC4000E and XC4000X Series Field Programmable Gate Arrays | Xilinx |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |