DataSheet.es    


PDF Z2SMB27 Data sheet ( Hoja de datos )

Número de pieza Z2SMB27
Descripción Surface mount Silicon-Zener Diodes (non-planar technology)
Fabricantes Diotec Semiconductor 
Logotipo Diotec Semiconductor Logotipo



Hay una vista previa y un enlace de descarga de Z2SMB27 (archivo pdf) en la parte inferior de esta página.


Total 2 Páginas

No Preview Available ! Z2SMB27 Hoja de datos, Descripción, Manual

Z2 SMB 1 … Z2 SMB 200 (2 W)
Surface mount Silicon-Zener Diodes
(non-planar technology)
Flächendiffundierte Si-Zener-Dioden
für die Oberflächenmontage
Dimensions / Maße in mm
Maximum power dissipation
Maximale Verlustleistung
2W
Nominal Z-voltage – Nominale Z-Spannung
1…200 V
Plastic case
Kunststoffgehäuse
~ SMB
~ DO-214AA
Weight approx. – Gewicht ca.
0.1 g
Plastic material has UL classification 94V-0
Gehäusematerial UL94V-0 klassifiziert
Standard packaging taped and reeled
Standard Lieferform gegurtet auf Rolle
see page 18
siehe Seite 18
Standard Zener voltage tolerance is graded to the international E 24 (~5%) standard.
Other voltage tolerances and higher Zener voltages on request.
Die Toleranz der Zener-Spannung ist in der Standard-Ausführung gestuft nach der
internationalen Reihe E 24 (~5%). Andere Toleranzen oder höhere Arbeitsspannungen auf
Anfrage.
Maximum ratings and Characteristics
Grenz- und Kennwerte
Power dissipation – Verlustleistung
Non repetitive peak power dissipation, t < 10 ms
Einmalige Impuls-Verlustleistung, t < 10 ms
TA = 25/C
TA = 25/C
Ptot
PZSM
2 W 1)
40 W
Operating junction temperature – Sperrschichttemperatur
Storage temperature – Lagerungstemperatur
Thermal resistance junction to ambient air
Wärmewiderstand Sperrschicht – umgebende Luft
Tj – 50...+150/C
TS – 50...+175/C
RthA < 60 K/W 1)
Thermal resistance junction to terminal
Wärmewiderstand Sperrschicht – Anschluß
RthT < 15 K/W
Zener voltages see table on next page – Zener-Spannungen siehe Tabelle auf der nächsten Seite
1) Mounted on P.C. board with 50 mm2 copper pads at each terminal
Montage auf Leiterplatte mit 50 mm2 Kupferbelag (Lötpad) an jedem Anschluß
2) Tested with pulses – Gemessen mit Impulsen
3) The Z2SMB 1 is a diode operated in forward. Hence, the index of all parameters should be “F” instead of “Z”.
The cathode, indicated by a white band is to be connected to the negative pole.
Die Z2SMB 1 ist eine in Durchlaß betriebene Si-Diode. Daher ist bei allen Kenn- und Grenzwerten der Index
“F” anstatt “Z” zu setzten. Die mit weißem Balken gekennzeichnete Kathode ist mit dem Minuspol zu verbinden.
202 28.02.2002

1 page





PáginasTotal 2 Páginas
PDF Descargar[ Datasheet Z2SMB27.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
Z2SMB20Surface mount Silicon-Zener Diodes (non-planar technology)Diotec Semiconductor
Diotec Semiconductor
Z2SMB200Surface mount Silicon-Zener Diodes (non-planar technology)Diotec Semiconductor
Diotec Semiconductor
Z2SMB22Surface mount Silicon-Zener Diodes (non-planar technology)Diotec Semiconductor
Diotec Semiconductor
Z2SMB24Surface mount Silicon-Zener Diodes (non-planar technology)Diotec Semiconductor
Diotec Semiconductor

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar