DataSheet.es    


PDF Z1SMA16 Data sheet ( Hoja de datos )

Número de pieza Z1SMA16
Descripción Surface mount Silicon-Zener Diodes (non-planar technology)
Fabricantes Diotec Semiconductor 
Logotipo Diotec Semiconductor Logotipo



Hay una vista previa y un enlace de descarga de Z1SMA16 (archivo pdf) en la parte inferior de esta página.


Total 2 Páginas

No Preview Available ! Z1SMA16 Hoja de datos, Descripción, Manual

Z1 SMA 1 … Z1 SMA 100 (1 W)
Surface mount Silicon-Zener Diodes
(non-planar technology)
Flächendiffundierte Si-Zener-Dioden
für die Oberflächenmontage
5 ± 0.2
1 0.15
Type
Typ
4.6 ± 0.2
Dimensions / Maße in mm
Maximum power dissipation
Maximale Verlustleistung
1W
Nominal Z-voltage – Nominale Z-Spannung
1…100 V
Plastic case
Kunststoffgehäuse
~ SMA
~ DO-214AC
Weight approx. – Gewicht ca.
0.07 g
Plastic material has UL classification 94V-0
Gehäusematerial UL94V-0 klassifiziert
Standard packaging taped and reeled
Standard Lieferform gegurtet auf Rolle
see page 18
siehe Seite 18
Standard Zener voltage tolerance is graded to the international E 24 (~5%) standard.
Other voltage tolerances and higher Zener voltages on request.
Die Toleranz der Zener-Spannung ist in der Standard-Ausführung gestuft nach der internationa-
len Reihe E 24 (~5%). Andere Toleranzen oder höhere Arbeitsspannungen auf Anfrage.
Maximum ratings and Characteristics
Grenz- und Kennwerte
Power dissipation
Verlustleistung
TA = 50/C
Ptot
1 W 1)
Operating junction temperature – Sperrschichttemperatur
Storage temperature – Lagerungstemperatur
Thermal resistance junction to ambient air
Wärmewiderstand Sperrschicht – umgebende Luft
Tj – 50...+150/C
TS – 50...+175/C
RthA < 70 K/W 1)
Thermal resistance junction to terminal
Wärmewiderstand Sperrschicht – Anschluß
RthT < 30 K/W
Zener voltages see table on next page – Zener-Spannungen siehe Tabelle auf der nächsten Seite
1) Mounted on P.C. board with 25 mm2 copper pads at each terminal
Montage auf Leiterplatte mit 25 mm2 Kupferbelag (Lötpad) an jedem Anschluß
2) Tested with pulses – Gemessen mit Impulsen
3) The Z1SMA 1 is a diode operated in forward. Hence, the index of all parameters should be “F” instead of “Z”.
The cathode, indicated by a white band is to be connected to the negative pole.
Die Z1SMA 1 ist eine in Durchlaß betriebene Si-Diode. Daher ist bei allen Kenn- und Grenzwerten der Index
“F” anstatt “Z” zu setzten. Die mit weißem Balken gekennzeichnete Kathode ist mit dem Minuspol zu verbinden.
198 28.02.2002

1 page





PáginasTotal 2 Páginas
PDF Descargar[ Datasheet Z1SMA16.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
Z1SMA1Surface mount Silicon-Zener Diodes (non-planar technology)Diotec Semiconductor
Diotec Semiconductor
Z1SMA10Surface mount Silicon-Zener Diodes (non-planar technology)Diotec Semiconductor
Diotec Semiconductor
Z1SMA101.0W Surface Mount Zener DiodesTAITRON
TAITRON
Z1SMA100Surface mount Silicon-Zener Diodes (non-planar technology)Diotec Semiconductor
Diotec Semiconductor

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar