|
|
PDF IR140CSP Data sheet ( Hoja de datos )
| Número de pieza | IR140CSP | |
| Descripción | Flipky | |
| Fabricantes | International Rectifier | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de IR140CSP (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
FlipkyTM
Features
z Ultra Low VF per Footprint Area
z Low Thermal Resistance
z One-fifth Footprint of SMA
z Super Low Profile (<.8mm)
z Available Tested on Tape & Reel
Bulletin I0148J rev. C 03/04
IR140CSP
1 Amp
FlipkyTM
Major Ratings and Characteristics
Characteristics
IR140CPS Units
IF(AV) Rectangular waveform
1.0
A
VRRM
IFSM @ tp = 5 µs sine
VF @ 1.0 Apk, TJ=125°C
40
250
0.38
V
A
V
TJ range
- 55 to 150
°C
Description
True chip-scale packaging is available from International
Rectifier. The IR140CPS surface-mount Schottky
rectifier has been designed for applications requiring low
forward drop and very small foot prints on PC boards.
Typical applications are in disk drives, switching power
supplies, converters, free-wheeling diodes, battery
charging, and reverse battery protection.
z Small foot print, surface mountable
z Low forward voltage drop
z High frequency operation
z Guard ring for enhanced ruggedness and long term
reliability
The FlipkyTM package, is one-fifth the footprint of a
comparable SMA package and has a profile of less then
.8mm. Combined with the low thermal resistance of the
die level device, this makes the FlipkyTM the best device
for application where printed circuit board space is at a
premium and in extremely thin application environments
such as battery packs, cell phones and PCMCIA cards.
www.irf.com
1
1 page  
Outline Dimension and Tape and Reel
BALL 1 MARK
IR
140C
0001
0101
PART NUMBER
LOT NUMBER
DATE CODE
B
2X
0.400
[.016]
0.10 [.004] C
2X 1.524
[.060]
4
BALL ASSIGNMENTS
1 = CATHODE
2 = CATHODE
A 3 = ANODE
4 = ANODE
3 0.10 [.004] C
2X
1.524
[.060]
Ø 13"
IR140CSP
Bulletin I0148J rev. C 03/04
12
0.800
[.032]
4X
NOTES:
1. DIMENSIONING & TOLERANCING PER ASME Y14.5M-1994.
2. CONTROLLING DIMENSION: MILLIMETER
3. DIMENSIONS ARE SHOWN IN MILLIMETERS [INCHES].
RECOMMENDED FOOTPRINT
0.800 [.032]
Cathode Ball 1
Cathode Ball 2
A1 BALL
LOCATION
8mm
8mm
4mm
FEED DIRECTION
NOTES:
1. TAPE AND REEL OUTLINE CONFORMS TO EIA-481 & EIA-541.
Anode Ball 4
0.800 [.032]
Anode Ball 3
4X Ø 0.25 [.010]
Data and specifications subject to change without notice.
This product has been designed for Consumer Level.
Qualification Standards can be found on IR's Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7309
Visit us at www.irf.com for sales contact information. 03/04
www.irf.com
5
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet IR140CSP.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| IR140CSP | Flipky | International Rectifier |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |