DataSheet.es    


PDF SMAJ7.0 Data sheet ( Hoja de datos )

Número de pieza SMAJ7.0
Descripción SURFACE MOUNT TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR
Fabricantes General Semiconductor 
Logotipo General Semiconductor Logotipo



Hay una vista previa y un enlace de descarga de SMAJ7.0 (archivo pdf) en la parte inferior de esta página.


Total 4 Páginas

No Preview Available ! SMAJ7.0 Hoja de datos, Descripción, Manual

SMAJ5.0 THRU SMAJ170CA
SURFACE MOUNT TRANSZORB™ TRANSIENT VOLTAGE SUPPRESSOR
Stand-off Voltage - 5.0 to 170 Volts Peak Pulse Power - 300 Watts
0.065 (1.65)
0.049 (1.25)
0.090 (2.29)
0.078 (1.98)
DO-214AC
0.177 (4.50)
0.157 (3.99)
0.110 (2.79)
0.100 (2.54)
0.012 (0.305)
0.006 (0.152)
FEATURES
Optimized for LAN protection applications
Ideal for ESD protection of data lines in accordance
with IEC 1000-4-2 (IEC801-2)
Ideal for EFT protection of data lines in accordance with
IEC1000-4-4 (IEC801-4)
Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
Glass passivated junction
Excellent clamping capability
Low incremental surge resistance
Fast response time: typically less than 1.0ps from 0 Volts
to V(BR) min.
300W peak pulse power capability with a 10/1000µs
waveform, repetition rate (duty cycle): 0.01%
High temperature soldering guaranteed:
250°C/10 seconds at terminals
0.060 (1.52)
0.030 (0.76)
0.008 (0.203) MAX.
0.208 (5.28)
0.194 (4.93)
Dimensions in inches and (millimeters)
MECHANICAL DATA
Case: JEDEC DO-214AC molded plastic body over
passivated chip
Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
Polarity: For uni-directional types the color band denotes
the cathode, which is postitive with respect to the anode
under normal TVS operation
Mounting Position: Any
Weight: 0.002 ounces, 0.064 gram
DEVICES FOR BIDIRECTIONAL APPLICATIONS
For bi-directional use suffix C or CA for types SMAJ5.0 thru SMAJ170 (e.g. SMAJ5.0C, SMAJ170CA)
Electrical characteristics apply in both directions.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Peak pulse power dissipation with a 10/1000µs waveform (NOTE 1, 2, FIG.1)
Peak pulse current with a 10/1000µs waveform (NOTE 1)
Peak forward surge current 8.3ms single half sine-wave superimposed
on rated load (JEDEC Method) (NOTES 2, 3) - unidirectional only
Maximum instantaneous forward voltage at 25A (NOTE 3)
Operating junction and storage temperature range
SYMBOLS
PPM
IPPM
IFSM
VF
TJ, TSTG
VALUE
Minimum 300
SEE TABLE 1
40.0
3.5
-55 to +150
UNITS
Watts
Amps
Amps
Volts
°C
NOTES:
(1) Non-repetitive current pulse, per Fig.3 and derated above TA=25°C per Fig. 2
(2) Mounted on 0.2 x 0.2” (5.0 x 5.0mm) copper pads to each terminal
(3) Measured on 8.3ms single half sine-wave. For uni-directional devices only.
1/20/99

1 page





PáginasTotal 4 Páginas
PDF Descargar[ Datasheet SMAJ7.0.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
SMAJ7.0TVS Diode, SMD (Transient Voltage Suppressor)Jinan Gude Electronic Device
Jinan Gude Electronic Device
SMAJ7.0SURFACE MOUNT TRANSZORB TRANSIENT VOLTAGE SUPPRESSORGeneral Semiconductor
General Semiconductor
SMAJ7.0TVS Diode, SMD (Transient Voltage Suppressor)EIC discrete Semiconductors
EIC discrete Semiconductors
SMAJ7.0SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORSETC
ETC

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar