|
|
Número de pieza | S5G9802X01-D0B0 | |
Descripción | INFRAED REMOCON RECEIVER | |
Fabricantes | Samsung semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de S5G9802X01-D0B0 (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
No Preview Available ! INFRAED REMOCON RECEIVER
INTRODUCTION
TheS5G9802X01 is a CMOS integrated circuit for the infrared ray
remote control transmitter function to be used with the KS9801
for receiver. It can be applied to TV, VCR, VDP, CDP and AV
controller.
The S5G9802X01 has 18 functions, and a total of 75 commands can
be transmitted. These commands are generated by continuous
keys with multiple keying and 12 commands by single shot keys.
16−DIP−300A
FEATURES
• Wide range of operating supply voltage :
VDD = 2.0V - 5V
• Low power consumption : IDS<1 m A at standby mode
• Containing ceramic oscillation circuit
• Function of multiple keying
• Adaptable to various models using custom code bits
ORDERING INFORMATION
Device
S5G9802X01-D0B0
Package
16−DIP−300A
Operating Temperature
− 20°C − + 75°C
S5G9802X01
1
1 page INFRAED REMOCON RECEIVER
S5G9802X01
FUNCTIONAL DESCRIPTION
1. OSCILLATION CIRCUIT
• The oscillation circuit is activated when any key is depressed. The ceramic resonator connected to XI, XO is
normally operated at 455kHz oscillation frequency.
fosc
XI 2
C1
3 XO
2 3 --- XI, XO Terminals
C1, C2 = 100pF
ceramic
resonator
C2
Figure 3.
2. KEY INPUT & STROBE OUTPUT
• All key input pins have a pull down resistor to VSS. 18 keys can be connected by key input K1 - K6 and 6x3
matrix by means of strobe signal ST1 - ST3.
• Multiple keying is possible for the keys connected to ST1 Line (key No. 1 - 6), and all depressed keys are
output (Output becomes continuous pulses).
• Among the strobe signal lines, priority is set in the order, ST1>ST2>ST3.
The keys connected to ST2 and ST3 lines have priority and when input is made through more than 2 keys, and
single signal is preferentially output in order of K1 - K6.
• Finally, the keys connected to ST2 and ST3 lines are for single signals and no second signal is transmitted
unless input is made again after the key is released once.
5
5 Page |
Páginas | Total 10 Páginas | |
PDF Descargar | [ Datasheet S5G9802X01-D0B0.PDF ] |
Número de pieza | Descripción | Fabricantes |
S5G9802X01-D0B0 | INFRAED REMOCON RECEIVER | Samsung semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |