|
|
Número de pieza | ILX103A | |
Descripción | 3000-pixel CCD Linear Image Sensor (B/W) | |
Fabricantes | Sony Corporation | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de ILX103A (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
No Preview Available ! ILX103A
3000-pixel CCD Linear Image Sensor (B/W)
Description
The ILX103A is a rectangular reduction type CCD
linear image sensor designed for bar code POS
hand scanner and optical measuring equipment use.
A built-in timing generator and clock-drivers ensure
single 5V power supply for easy use.
16 pin SIP (Ceramic)
Features
• Number of effective pixels: 3000 pixels
• Pixel size: 7µm × 200µm (7µm pitch)
• S/H output
• Built-in timing generator and clock-drivers
• Output amplifier gain switching function
(2-level: switching gain ratio 1:4)
• SIP small package
• Clock frequency: 500kHz (Typ.),
100kHz (Min.), 1MHz (Max.)
Internal Structure
Absolute Maximum Ratings
• Supply voltage
VDD
• Operating temperature
• Storage temperature
6
–10 to +60
–30 to +80
V
°C
°C
Pin Configuration (Top View)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E98X48A91-PS
1 page ILX103A
Input Clock Voltage Condition
Item
VIH
VIL
Min. Typ. Max.
3.0 VDD 5.5
0.0 — 0.1
Unit
V
V
∗ This is applied to the all external pulses.
(φCLK, φROG, φSHUT)
φCLK Timing (For all modes)
φCLK
t1
t2
t3 t4
Item
φCLK pulse rise/fall time
φCLK pulse Duty∗1
∗1 100 × t4/ (t3 + t4)
φROG, φCLK Timing
Symbol
t1, t2
—
Min. Typ. Max. Unit
0 10 100 ns
40 50 60 %
φROG
φCLK
t6
t5
t7
t8
t9
Item
φROG, φCLK pulse timing 1
φROG, φCLK pulse timing 2
φROG pulse rise/fall time
φROG pulse period
Note) τ is the period of φCLK.
Symbol
t5
t9
t6, t8
t7
Min. Typ. Max. Unit
1/8τ 1/4τ 3/8τ ns
1/8τ 1/4τ 3/8τ ns
0 10 100 ns
6τ 10τ 20τ ns
–5–
5 Page ILX103A
4) Dust and dirt protection
a) Operate in clean environments.
b) Do not either touch glass plates by hand or have any object come in contact with glass surfaces. Should
dirt stick to a glass surface, blow it off with an air blower. (For dirt stuck through static electricity ionized
air is recommended.)
c) Clean with a cotton bud and ethyl alcohol if the glass surface is grease stained. Be careful not to scratch
the glass.
d) Keep in a case to protect from dust and dirt. To prevent dew condensation, preheat or precool when
moving to a room with great temperature differences.
5) Exposure to high temperatures or humidity will affect the characteristics. Accordingly avoid storage or
usage in such conditions.
6) CCD image sensors are precise optical equipment that should not be subject to mechanical shocks.
7) Normal output signal is not obtained immediately after device switch on.
– 11 –
11 Page |
Páginas | Total 12 Páginas | |
PDF Descargar | [ Datasheet ILX103A.PDF ] |
Número de pieza | Descripción | Fabricantes |
ILX103A | 3000-pixel CCD Linear Image Sensor (B/W) | Sony Corporation |
ILX103A | 3000-pixel CCD Linear Image Sensor | Sony |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |