|
|
Número de pieza | ILQ3 | |
Descripción | PHOTOTRANSISTOR OPTOCOUPLER | |
Fabricantes | Siemens Semiconductor Group | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de ILQ3 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! QUAD CHANNEL ILQ3
PHOTOTRANSISTOR
OPTOCOUPLER
FEATURES
• Current Transfer Ratio at IF=1.6 mA, 300% Min.
• High Collector-Emitter Voltage
• BVCEO=50 V
• Field-Effect Stable by TRansparent IOn Shield
(TRIOS)
• Double Molded Package Offers Isolation Test Voltage
5300 VACRMS, 1 sec.
• Underwriters Lab File #E52744
• V VDE 0884 Available with Option 1
DE
Maximum Ratings (Each Channel)
Emitter
Reverse Voltage ............................................................. 6 V
Continuous Forward Current ..................................... 60 mA
Surge Current .............................................................. 2.5 A
Power Dissipation................................................... 100 mW
Derate Linearly from 25°C .................................. 1.3 mW/°C
Detector
Collector-Emitter Reverse Voltage................................ 50 V
Collector Current ....................................................... 50 mA
Collector Current (t<1 ms)....................................... 400 mA
Total Power Dissipation .......................................... 200 mW
Derate Linearly from 25°C .................................. 2.6 mW/°C
Package
Isolation Test Voltage (between emitter
and detector, refer to standard climate
23°C/50% RH, DIN50014) ..................VIO=5300 VACRMS
Creepage ............................................................min. 7 mm
Clearance............................................................min. 7 mm
Isolation Resistance
VIO=500 V, TA=25°C ......................................RIO=1012 Ω
VIO=500 V, TA=100°C ....................................RIO=1011 Ω
Power Dissipation................................................... 250 mW
Derate Linearly from 25°C .................................. 3.3 mW/°C
Storage Temperature Range ........................ –40 to +150°C
Operating Temperature Range..................... –40 to +100°C
Junction Temperature................................................ 100°C
Soldering Temperature,
2 mm from case bottom........................................ 260°C
Package Dimensions in Inches (mm)
ILD3—Dual Channel
.268 (6.81)
.255 (6.48)
43 21
56 78
.390 (9.91)
.379 (9.63)
.045 (1.14)
.030 (.76)
Pin One I.D.
Anode 1
Cathode 2
Cathode 3
Anode 4
8 Emitter
7 Collector
6 Collector
5 Emitter
.305 Typ.
(7.75) Typ.
.150 (3.81)
.130 (3.30)
4° Typ.
.022 (.56)
.018 (.46)
.040 (1.02)
.030 (.76 )
.100 (2.54) Typ.
ILQ3—Quad Channel
10° Typ.
.135 (3.43)
.115 (2.92)
3°–9°
.012 (.30)
.008 (.20)
Pin One I.D. Anode 1
16 Emitter
Cathode 2
15 Collector
.268 (6.81)
.255 (6.48)
Cathode 3
Anode 4
Anode 5
14 Collector
13 Emitter
12 Emitter
Cathode 6
11 Collector
.790 (20.07)
.779 (19.77 )
Cathode 7
Anode 8
10 Collector
9 Emitter
.045 (1.14)
.030 (.76)
.150 (3.81)
.130 (3.30)
.305 Typ.
(7.75) Typ.
4° Typ.
.022 (.56)
.018 (.46)
.100 (2.54) Typ.
.040 (1.02)
.030 (.76 )
10° Typ.
3°–9°
.012 (.30)
.008 (.20)
.135 (3.43)
.115 (2.92)
DESCRIPTION
The ILD/Q3 are optically coupled isolated pairs employing GaAs
infrared LEDs and silicon NPN phototransistor. Signal information,
including a DC level, can be transmitted by the drive while maintain-
ing a high degree of electrical isolation between input and output.
The ILD/Q3 are especially designed for driving medium-speed logic
and can be used to eliminate troublesome ground loop and noise
problems. Also these couplers can be used to replace relays and
transformers in many digital interface applications such as CRT
modulation. The ILD3 has two isolated channels in a single DIP
package and the ILQ3 has four isolated channels per package.
See Appnote 45, “How to Use Optocoupler Normalized Curves.”
5–158
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet ILQ3.PDF ] |
Número de pieza | Descripción | Fabricantes |
ILQ1 | PHOTOTRANSISTOR OPTOCOUPLER | Siemens Semiconductor Group |
ILQ1 | (ILQ1 - ILQ5) Optocoupler | Vishay Siliconix |
ILQ2 | PHOTOTRANSISTOR OPTOCOUPLER | Siemens Semiconductor Group |
ILQ2 | (ILQ1 - ILQ5) Optocoupler | Vishay Siliconix |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |