|
|
Número de pieza | 74AC00B | |
Descripción | QUAD 2-INPUT NAND GATE | |
Fabricantes | STMicroelectronics | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de 74AC00B (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
No Preview Available ! SN54AC00, SN74AC00
QUADRUPLE 2-INPUT POSITIVE-NAND GATES
SCAS524C – AUGUST 1995 – REVISED SEPTEMBER 1996
D EPIC ™ (Enhanced-Performance Implanted
CMOS) 1-µm Process
D Package Options Include Plastic
Small-Outline (D), Shrink Small-Outline
(DB), Thin Shrink Small-Outline (PW), DIP
(N) Packages, Ceramic Chip Carriers (FK),
Flat (W), and DIP (J) Packages
description
The ‘AC00 contain four independent 2-input NAND
gates. Each gate performs the Boolean function of
Y = A S B or Y = A + B in positive logic.
The SN54AC00 is characterized for operation over
the full military temperature range of – 55°C to 125°C.
The SN74AC00 is characterized for operation from
– 40°C to 85°C.
FUNCTION TABLE
(each gate)
INPUTS
AB
HH
LX
XL
OUTPUT
Y
L
H
H
SN54AC00 . . . J OR W PACKAGE
SN74AC00 . . . D, DB, N, OR PW PACKAGE
(TOP VIEW)
1A
1B
1Y
2A
2B
2Y
GND
1
2
3
4
5
6
7
14 VCC
13 4B
12 4A
11 4Y
10 3B
9 3A
8 3Y
SN54AC00 . . . FK PACKAGE
(TOP VIEW)
3 2 1 20 19
1Y 4
18 4A
NC 5
17 NC
2A 6
16 4Y
NC 7
15 NC
2B 8
14 3B
9 10 11 12 13
NC – No internal connection
logic symbol†
logic diagram (positive logic)
1
1A
&3
2 1Y
1B
4
2A 6
5 2Y
2B
9
3A 8
10 3Y
3B
12
4A 11
13 4Y
4B
A
B
Y
† This symbol is in accordance with ANSI/IEEE Std 91-1984 and
IEC Publication 617-12.
Pin numbers shown are for the D, DB, J, N, PW, and W packages.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
EPIC is a trademark of Texas Instruments Incorporated.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright © 1996, Texas Instruments Incorporated
•POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1
1 page IMPORTANT NOTICE
Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those
pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent
TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily
performed, except those mandated by government requirements.
CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF
DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL
APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR
WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER
CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO
BE FULLY AT THE CUSTOMER’S RISK.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
semiconductor products or services might be or are used. TI’s publication of information regarding any third
party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.
Copyright © 1998, Texas Instruments Incorporated
5 Page |
Páginas | Total 5 Páginas | |
PDF Descargar | [ Datasheet 74AC00B.PDF ] |
Número de pieza | Descripción | Fabricantes |
74AC00 | QUAD 2-INPUT NAND GATE | STMicroelectronics |
74AC00 | Quad 2-Input NAND Gate | Fairchild Semiconductor |
74AC00 | Quad 2-Input NAND Gate | Hitachi Semiconductor |
74AC00 | QUAD 2-INPUT NAND GATE | Motorola Inc |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |