DataSheet.es    


PDF IDT54FCT166244ATPAB Data sheet ( Hoja de datos )

Número de pieza IDT54FCT166244ATPAB
Descripción FAST CMOS 16-BIT BUFFER/LINE DRIVER
Fabricantes Integrated Device Technology 
Logotipo Integrated Device Technology Logotipo



Hay una vista previa y un enlace de descarga de IDT54FCT166244ATPAB (archivo pdf) en la parte inferior de esta página.


Total 9 Páginas

No Preview Available ! IDT54FCT166244ATPAB Hoja de datos, Descripción, Manual

Integrated Device Technology, Inc.
FAST CMOS 16-BIT
BUFFER/LINE DRIVER
IDT54/74FCT16244T/AT/CT/ET
IDT54/74FCT162244T/AT/CT/ET
IDT54/74FCT166244T/AT/CT
IDT54/74FCT162H244T/AT/CT/ET
FEATURES:
DESCRIPTION:
• Common features:
The 16-Bit Buffer/Line Driver is for bus interface or signal buffering
– 0.5 MICRON CMOS Technology
applications requiring high speed and low power dissipation. These
– High-speed, low-power CMOS replacement for
devices have a flow through pin organization, and shrink packaging
ABT functions
to simplify board layout. All inputs are designed with hysteresis for
Typical tSK(o) (Output Skew) < 250ps
improved noise margin. The three-state controls allow independent
– Low input and output leakage 1µA (max.)
4-bit, 8-bit or combined 16-bit operation. These parts are plug in
– ESD > 2000V per MIL-STD-883, Method 3015;
replacements for 54/74ABT16244 where higher speed, lower noise
> 200V using machine model (C = 200pF, R = 0)
or lower power dissipation levels are desired.
– Packages include 25 mil pitch SSOP, 19.6 mil pitch
The FCT16244T/AT/CT/ET are ideally suited for driving
TSSOP, 15.7 mil pitch TVSOP and 25 mil pitch Cerpack high capacitance loads (>200pF) and low impedance
– Extended commercial range of -40°C to +85°C
backplanes. These "high drive" buffers are designed with
• Features for FCT16244T/AT/CT/ET:
power off disable capability to allow "live insertion" of boards
– High drive outputs (-32mA IOH, 64mA IOL)
when used in a backplane interface.
– Power off disable outputs permit “live insertion”
The FCT162244T/AT/CT/ET have balanced output current
– Typical VOLP (Output Ground Bounce) < 1.0V at
levels and current limiting resistors. These offer low ground
VCC = 5V, TA = 25°C
bounce, minimal undershoot, and controlled output fall times,
• Features for FCT162244T/AT/CT/ET:
reducing the need for external series terminating resistors
– Balanced Output Drivers: ±24mA (commercial),
while still providing very high speed operation for loads of less
±16mA (military)
than 200pF.
– Reduced system switching noise
The FCT166244T/AT/CT are suited for very low noise,
– Typical VOLP (Output Ground Bounce) < 0.6V at
point-to-point driving where there is a single receiver, or a very
VCC = 5V,TA = 25°C
light lumped load (<100pF). The buffers are designed to limit
• Features for FCT166244T/AT/CT:
the output current to levels which will avoid noise and ringing
– Light Drive Balanced Output: ±8mA (commercial),
on the signal lines without using external series terminating
±6mA (military)
resistors.
– Minimal system switching noise
The FCT162H244T/AT/CT/ET have "Bus-Hold" which re-
– Typical VOLP (Output Ground Bounce) < 0.25V at
tains the input's last state whenever the input goes to high
VCC = 5V,TA = 25°C
impedance. This prevents "floating" inputs and eliminates the
• Features for FCT162H244T/AT/CT/ET:
need for pull-up/down resistors.
– Bus-Hold retains last active bus state during 3-state
– Eliminates the need for external pull up resistors
FUNCTIONAL BLOCK DIAGRAM
1OE
3OE
1A1
1Y1 3A1
3Y1
1A2
1Y2 3A2
3Y2
1A3
1Y3 3A3
3Y3
1A4
1Y4 3A4
3Y4
2OE
2A1 2Y1
2A2 2Y2
2A3 2Y3
2A4 2Y4
The IDT logo is a registered trademark of Integrated Device Technology, Inc. 2544 drw 01
MILITARY AND COMMERCIAL TEMPERATURE RANGES
©1996 Integrated Device Technology, Inc.
5.2
4OE
4A1
4A2
4A3
4A4
4Y1
4Y2
4Y3
4Y4
2544 drw 02
OCTOBER 1996
DSC-2544/9
15

1 page




IDT54FCT166244ATPAB pdf
IDT54/74FCT16244T/AT/CT/ET, 162244T/AT/CT/ET,
166244T/AT/CT, 162H244T/AT/CT/ET FAST CMOS 16-BIT BUFFER/LINE DRIVER
MILITARY AND COMMERCIAL TEMPERATURE RANGES
OUTPUT DRIVE CHARACTERISTICS FOR FCT16244T
Symbol
IO
Parameter
Output Drive Current
Test Conditions(1)
VCC = Max., VO = 2.5V(3)
Min. Typ.(2) Max. Unit
–50 — –180 mA
VOH Output HIGH Voltage
VCC = Min.
IOH = –3mA
2.5 3.5 —
V
VOL
IOFF
Output LOW Voltage
Input/Output Power Off Leakage(5)
VIN = VIH or VIL
IOH = –12mA MIL.
IOH = –15mA COM'L.
IOH = –24mA MIL.
IOH = –32mA COM'L.(4)
VCC = Min.
IOL = 48mA MIL.
VIN = VIH or VIL
IOL = 64mA COM'L.
VCC = 0V, VIN or VO 4.5V
2.4
2.0
3.5 —
V
3.0 —
V
0.2 0.55 V
±1 µA
OUTPUT DRIVE CHARACTERISTICS FOR FCT162244T
2544 lnk 07
Symbol
IODL
Parameter
Output LOW Current
Test Conditions(1)
VCC = 5V, VIN = VIH or VIL, VOUT = 1.5V(3)
Min. Typ.(2) Max. Unit
60 115 200 mA
IODH
Output HIGH Current
VCC = 5V, VIN = VIH or VIL, VOUT = 1.5V(3)
–60 –115 –200 mA
VOH Output HIGH Voltage
VCC = Min.
IOH = –16mA MIL.
2.4 3.3 —
V
VIN = VIH or VIL
IOH = –24mA COM'L.
VOL Output LOW Voltage
VCC = Min.
IOL = 16mA MIL.
— 0.3 0.55 V
VIN = VIH or VIL
IOL = 24mA COM'L.
2544 lnk 08
OUPUT DRIVE CHARACTERISTICS FOR FCT166244T
Symbol
IODL
IODH
Parameter
Output LOW Current
Output HIGH Current
Test Conditions(1)
VCC = 5V, VIN = VIH or VIL, VOUT = 1.5V(3)
VCC = 5V, VIN = VIH or VIL, VOUT = 1.5V(3)
Min.
16
–16
Typ.(2)
48
–48
Max.
96
–96
Unit
mA
mA
VOH Output HIGH Voltage
VCC = Min.
IOH = –6mA MIL.
2.4 3.3 —
V
VIN = VIH or VIL
IOH = –8mA COM'L.
VOL Output LOW Voltage
VCC = Min.
IOL = 6mA MIL.
— 0.3 0.55 V
NOTES:
VIN = VIH or VIL
IOL = 8mA COM'L.
2544 lnk 09
1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at Vcc = 5.0V, +25°C ambient.
3. Not more than one output should be tested at one time. Duration of the test should not exceed one second.
4. Duration of the condition can not exceed one second.
5. The test limit for this parameter is ± 5µA at TA = –55°C.
5.2 5

5 Page










PáginasTotal 9 Páginas
PDF Descargar[ Datasheet IDT54FCT166244ATPAB.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
IDT54FCT166244ATPAFAST CMOS 16-BIT BUFFER/LINE DRIVERIntegrated Device Technology
Integrated Device Technology
IDT54FCT166244ATPABFAST CMOS 16-BIT BUFFER/LINE DRIVERIntegrated Device Technology
Integrated Device Technology

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar