DataSheet.es    


PDF IDT54FCT162827ETPFB Data sheet ( Hoja de datos )

Número de pieza IDT54FCT162827ETPFB
Descripción FAST CMOS 20-BIT BUFFERS
Fabricantes Integrated Device Technology 
Logotipo Integrated Device Technology Logotipo



Hay una vista previa y un enlace de descarga de IDT54FCT162827ETPFB (archivo pdf) en la parte inferior de esta página.


Total 8 Páginas

No Preview Available ! IDT54FCT162827ETPFB Hoja de datos, Descripción, Manual

Integrated Device Technology, Inc.
FAST CMOS 20-BIT
BUFFERS
IDT54/74FCT16827AT/BT/CT/ET
IDT54/74FCT162827AT/BT/CT/ET
FEATURES:
• Common features:
– 0.5 MICRON CMOS Technology
– High-speed, low-power CMOS replacement for
ABT functions
Typical tSK(o) (Output Skew) < 250ps
– Low input and output leakage 1µA (max.)
– ESD > 2000V per MIL-STD-883, Method 3015;
> 200V using machine model (C = 200pF, R = 0)
– Packages include 25 mil pitch SSOP, 19.6 mil pitch
TSSOP, 15.7 mil pitch TVSOP and 25 mil pitch Cerpack
– Extended commercial range of -40°C to +85°C
– VCC = 5V ±10%
• Features for FCT16827AT/BT/CT/ET:
– High drive outputs (-32mA IOH, 64mA IOL)
– Power off disable outputs permit “live insertion”
– Typical VOLP (Output Ground Bounce) < 1.0V at
VCC = 5V, TA = 25°C
• Features for FCT162827AT/BT/CT/ET:
– Balanced Output Drivers: ±24mA (commercial),
±16mA (military)
– Reduced system switching noise
– Typical VOLP (Output Ground Bounce) < 0.6V at
VCC = 5V,TA = 25°C
DESCRIPTION:
The FCT16827AT/BT/CT/ET and FCT162827AT/BT/CT/
ET 20-bit buffers are built using advanced dual metal CMOS
technology. These 20-bit bus drivers provide high-perfor-
mance bus interface buffering for wide data/address paths or
busses carrying parity. Two pair of NAND-ed output enable
controls offer maximum control flexibility and are organized to
operate the device as two 10-bit buffers or one 20-bit buffer.
Flow-through organization of signal pins simplifies layout. All
inputs are designed with hysteresis for improved noise mar-
gin.
The FCT16827AT/BT/CT/ET are ideally suited for driving
high capacitance loads and low impedance backplanes. The
output buffers are designed with power off disable capability
to allow "live insertion" of boards when used as backplane
drivers.
The FCT162827AT/BT/CT/ET have balanced output drive
with current limiting resistors. This offers low ground bounce,
minimal undershoot, and controlled output fall times–reducing
the need for external series terminating resistors. The
FCT162827AT/BT/CT/ET are plug-in replacements for the
FCT16827AT/BT/CT/ET and ABT16827 for on-board inter-
face applications.
FUNCTIONAL BLOCK DIAGRAM
1OE1
1OE2
1A1
2OE1
2OE2
1Y1 2A1
2Y1
TO 9 OTHER CHANNELS
2773 drw 01
TO 9 OTHER CHANNELS
2773 drw 02
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
MILITARY AND COMMERCIAL TEMPERATURE RANGES
©1996 Integrated Device Technology, Inc.
5.17
AUGUST 1996
DSC-2773/7
1

1 page




IDT54FCT162827ETPFB pdf
IDT54/74FCT16827AT/BT/CT/ET, 162827AT/BT/CT/ET
FAST CMOS 20-BIT BUFFERS
MILITARY AND COMMERCIAL TEMPERATURE RANGES
POWER SUPPLY CHARACTERISTICS
Symbol
Parameter
Test Conditions(1)
Min. Typ.(2) Max. Unit
ICC
ICCD
Quiescent Power Supply Current
TTL Inputs HIGH
Dynamic Power Supply Current(4)
VCC = Max.
VIN = 3.4V(3)
VCC = Max.
Outputs Open
xOE1 = xOE2 = GND
One Input Toggling
VIN = VCC
VIN = GND
— 0.5 1.5 mA
— 60 100 µA/
MHz
50% Duty Cycle
IC
Total Power Supply Current(6)
VCC = Max.
VIN = VCC
— 0.6 1.5 mA
Outputs Open
VIN = GND
fi = 10MHz
50% Duty Cycle
xOE1 = xOE2 = GND
VIN = 3.4V
VIN = GND
— 0.9 2.3
One Bit Toggling
VCC = Max.
Outputs Open
fi = 2.5MHz
50% Duty Cycle
xOE1 = xOE2 = GND
Twenty Bits Toggling
VIN = VCC
VIN = GND
VIN = 3.4V
VIN = GND
— 3.0 5.5(5)
— 8.0 20.5(5)
NOTES:
1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at VCC = 5.0V, +25°C ambient.
3. Per TTL driven input (VIN = 3.4V). All other inputs at VCC or GND.
4. This parameter is not directly testable, but is derived for use in Total Power Supply Calculations.
5. Values for these conditions are examples of the ICC formula. These limits are guaranteed but not tested.
6. IC = IQUIESCENT + IINPUTS + IDYNAMIC
IC = ICC + ICC DHNT + ICCD (fCPNCP/2 + fiNi)
ICC = Quiescent Current (ICCL, ICCH and ICCZ)
ICC = Power Supply Current for a TTL High Input (VIN = 3.4V)
DH = Duty Cycle for TTL Inputs High
NT = Number of TTL Inputs at DH
ICCD = Dynamic Current Caused by an Input Transition Pair (HLH or LHL)
fCP = Clock Frequency for Register Devices (Zero for Non-Register Devices)
NCP = Number of Clock Inputs at fCP
fi = Input Frequency
Ni = Number of Inputs at fi
2773 tbl 08
5.17 5

5 Page










PáginasTotal 8 Páginas
PDF Descargar[ Datasheet IDT54FCT162827ETPFB.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
IDT54FCT162827ETPFFAST CMOS 20-BIT BUFFERSIntegrated Device Technology
Integrated Device Technology
IDT54FCT162827ETPFBFAST CMOS 20-BIT BUFFERSIntegrated Device Technology
Integrated Device Technology

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar