DataSheet.es    


PDF 2SD1803 Data sheet ( Hoja de datos )

Número de pieza 2SD1803
Descripción High-Current Switching Applications
Fabricantes Sanyo Semicon Device 
Logotipo Sanyo Semicon Device Logotipo



Hay una vista previa y un enlace de descarga de 2SD1803 (archivo pdf) en la parte inferior de esta página.


Total 5 Páginas

No Preview Available ! 2SD1803 Hoja de datos, Descripción, Manual

Ordering number:EN2085B
PNP/NPN Epitaxial Planar Silicon Transistors
2SB1203/2SD1803
High-Current Switching Applications
Applications
· Relay drivers, high-speed inverters, converters, and
other general high-current switching applications.
Features
· Low collector-to-emitter saturation voltage.
· High current and high fT.
· Excellent linearity of hFE.
· Fast switching speed.
· Small and slim package making it easy to make
2SB1203/2SD1803-applied sets smaller.
Package Dimensions
unit:mm
2045B
[2SB1203/2SD1803]
unit:mm
2044B
1 : Base
2 : Collector
3 : Emitter
4 : Collector
SANYO : TP
[2SB1203/2SD1803]
1 : Base
2 : Collector
3 : Emitter
4 : Collector
SANYO : TP-FA
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
92098HA (KT)/8309MO/3097AT, TS No.2085–1/5
Free Datasheet http://www.datasheet4u.com/

1 page




2SD1803 pdf
2SB1203/2SD1803
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer’s
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer’s products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any and all SANYO products described or contained herein fall under strategic
products (including services) controlled under the Foreign Exchange and Foreign Trade Control Law of
Japan, such products must not be exported without obtaining export license from the Ministry of
International Trade and Industry in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the “Delivery Specification”
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of September, 1998. Specifications and information herein are
subject to change without notice.
PS No.2085–5/5
Free Datasheet http://www.datasheet4u.com/

5 Page










PáginasTotal 5 Páginas
PDF Descargar[ Datasheet 2SD1803.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
2SD180Silicon NPN Power TransistorInchange Semiconductor
Inchange Semiconductor
2SD1800Driver ApplicationsSanyo Semicon Device
Sanyo Semicon Device
2SD1801Bipolar TransistorON Semiconductor
ON Semiconductor
2SD1801Silicon NPN Power TransistorInchange Semiconductor
Inchange Semiconductor

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar