DataSheet.es    


PDF EL6272CY Data sheet ( Hoja de datos )

Número de pieza EL6272CY
Descripción 1-Ch Laser Diode Driver + Oscillator
Fabricantes Elantec Semiconductor 
Logotipo Elantec Semiconductor Logotipo



Hay una vista previa y un enlace de descarga de EL6272CY (archivo pdf) en la parte inferior de esta página.


Total 2 Páginas

No Preview Available ! EL6272CY Hoja de datos, Descripción, Manual

EL6272C - Product Brief
1-Ch Laser Diode Driver + Oscillator
Features
Voltage-controlled output current
source (requiring one external set
resistor)
Current-controlled output current
source.
Rise time = 3.0 ns typ.
Fall time = 3.5 ns typ.
On-chip oscillator w/frequency
and amplitude control by use of
external resistors to ground.
Oscillator to 500 MHz typ.
Oscillator to 100 mA pk/pk typ.
Single +5V supply (±10%)
Current amplification = 100
TTL/CMOS control signals
Applications
MO drives
Mini-Disc drives
Writable optical drives
Laser diode current switching
Ordering Information
Part No
EL6272CY
Temp. Range
0°C to +70°C
Package
MSOP10
Outline #
MDP0043
General Description
The EL6272C is a single channel laser diode current amplifier that
provides controlled current to a grounded laser diode. The amplifier
can provide up to 200 mA of DC or pulsed current with switching
speeds of approximately three nanoseconds rise/fall time. The level of
the output current is set by an analog voltage applied to an external
resistor which converts the voltage into a current at the IIN pin (virtu-
ally ground). The current seen at this pin is then amplified by 100X to
become a current source at pin IOUT.
An on-chip 500 MHz oscillator is provided to allow current modula-
tion when in read mode. This is turned on when the OSCEN pin is held
high. Complete control of amplitude and frequency is set by two exter-
nal resistors connected to ground at pins RFREQ and RAMP (see
graphs in this data sheet for further explanation).
Output write current pulses are enabled when an Lsignal is applied
to the OUTEN pin.
The external resistor allows the user to accurately and independently
set the amplifier transconductance by applying a voltage to the set
resistor, without restriction on the voltage range, thus ensuring broad
voltage DAC compatibility. Alternatively, the IIN pin can be biased
from a current DAC or other current source.
Connection Diagram
ENABLE 1
IIN 2
RFREQ 3
OUTEN 4
OSCEN 5
10 VCC
9 IOUT
8 GND
7 RAMP
6 VCC
Complete Product Specifications
Elantec Technical Support:
North America: 1-888-352-6832 X 311
Asia: +85-45-682-5820
Europe: +44-18-977-6020
©2000 Elantec Semiconductor, Inc.

1 page





PáginasTotal 2 Páginas
PDF Descargar[ Datasheet EL6272CY.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
EL6272C1-Ch Laser Diode Driver + OscillatorElantec Semiconductor
Elantec Semiconductor
EL6272CY1-Ch Laser Diode Driver + OscillatorElantec Semiconductor
Elantec Semiconductor

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar