|
|
Número de pieza | BA5962FVM | |
Descripción | Power driver for CD player | |
Fabricantes | ROHM Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de BA5962FVM (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
No Preview Available ! Optical disc ICs
Power driver for CD player
BA5962FVM
BA5962FVM
BA5962FVM is 1ch BTL power driver IC for CD / DVD. MSOP8 package enables the smallest configuration.
This IC enables reduction of external parts, built-in level shift circuit.
!Applications
CD player
!Features
1) 1ch BTL driver for CD / DVD.
2) MSOP8 package enables the smallest configuration.
3) Built in level shift circuit.
4) Built in thermal-shut-down circuit.
!Absolute maximum ratings (Ta=25°C)
Parameter
Symbol
Power supply voltage
Power dissipation
VCC
Pd
Operating temperature
Topr
Storage temperature
Tstg
∗ PCB (70mm×70mm×1.6mm, glass epoxy) mounting.
Reduce power by 4.4mW for each degree above 25°C.
Limits
18
0.55
−35~+85
−55~+150
Unit
V
W
°C
°C
!Recommended operating conditions (Set the power supply voltage taking allowable dissipation into considering)
Parameter
Power supply voltage
Symbol
VCC
Min.
3
Typ.
5
Max.
10
Unit
V
1/5
1 page Optical disc ICs
BA5962FVM
4. If the bias pin (Pin 2) drops below 0.7V, the output is muted. Make sure that under normal operating conditions, this
pin is at 1.0V or above.
5. The output is muted in the event of a thermal shut down, mute-on, or a bias and VCC voltage drop. Only the driver
is muted. When muted, the internal bias voltage of the output pin becomes roughly (VCC-Vf) / 2). (Vf=0.7V)
6. Please connect a bypass capacitor (0.1µF) across the supply voltage lines close to the IC pins.
7. When a capacitance load is connected to the OP amplifier output, the amplifier phase margin decreases, which causes
the peak or oscillation. When connecting such load, insert a resistance in series between the output and the
capacitance load and take a full consideration for frequency characteristics to prevent problem during practical use.
8. Do not short-circuit between any output pin and supply pin (supply fault) or ground (ground fault), or between any
output pins (load short-circuit). When mounting the IC on the circuit board, be extremely cautions about the orientation
of the IC. If the orientation is mistaken, the IC may break down, and produce smoke in some cases.
!Electrical characteristics curve
On less than 3%
(percentage occupied by copper foil),
0.6 70mm×70mm, t=1.6mm
glass epoxy mounting.
0.4
0.2
0
0 25 50 75 100 125 150 175
AMBIENT TEMPERATURE : Ta (°C)
Fig.3 Power dissipation
!External dimensions (Units : mm)
2.9±0.1
85
14
0.475
0.145−+00..0035
0.22+−00..0054
0.65 0.08 S
0.08 M
MSOP8
5/5
5 Page |
Páginas | Total 5 Páginas | |
PDF Descargar | [ Datasheet BA5962FVM.PDF ] |
Número de pieza | Descripción | Fabricantes |
BA5962FVM | Power driver for CD player | ROHM Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |