DataSheet.es    


PDF EC3H02C Data sheet ( Hoja de datos )

Número de pieza EC3H02C
Descripción VHF to UHF Wide-Band Low-Noise Amplifier Applications
Fabricantes Sanyo Semicon Device 
Logotipo Sanyo Semicon Device Logotipo



Hay una vista previa y un enlace de descarga de EC3H02C (archivo pdf) en la parte inferior de esta página.


Total 5 Páginas

No Preview Available ! EC3H02C Hoja de datos, Descripción, Manual

Ordering number : ENN6579
EC3H02C
NPN Epitaxial Planar Silicon Transistor
EC3H02C
VHF to UHF Wide-Band Low-Noise
Amplifier Applications
Features
Low noise : NF=1.0dB typ (f=1GHz).
High gain :S21e2=12dB typ (f=1GHz).
High cutoff frequency : fT=7GHz typ.
Ultraminiature (1008 size) and thin (0.6mm)
leadless package .
Package Dimensions
unit : mm
2184
[EC3H02C]
0.5
0.2 0.2
0.05
34
21
Specifications
Absolute Maximum Ratings at Ta=25°C
(Bottom View) 0.05
0.8
1 : Base
2 : Emitter
3 : Collector
4 : Collector
SANYO : E-CSP1008-4
Parameter
Collector-to-Base Voltage
Collector-to-Emitter Voltage
Emitter-to-Base Voltage
Collector Current
Collector Dissipation
Junction Temperature
Storage Temperature
Symbol
VCBO
VCEO
VEBO
IC
PC
Tj
Tstg
Electrical Characteristics at Ta=25°C
Conditions
Parameter
Collector Cutoff Current
Emitter Cutoff Current
DC Current Gain
Gain-Bandwitch Product
Output Capacitance
Reverse Transfer Capacitance
Forward Transfer Gain
Noise Figure
Symbol
Conditions
ICBO
IEBO
hFE
fT
Cob
Cre
S21e21
S21e22
NF
VCB=10V, IE=0
VEB=1V, IC=0
VCE=5V, IC=20mA
VCE=5V, IC=20mA
VCB=10V, f=1MHz
VCB=10V, f=1MHz
VCE=5V, IC=20mA, f=1GHz
VCE=2V, IC=3mA, f=1GHz
VCE=5V, IC=7mA, f=1GHz
Ratings
20
10
2
70
100
150
--55 to +150
Unit
V
V
V
mA
mW
°C
°C
Ratings
min typ
100
57
0.7
0.45
9 12
8.5
1.0
max
1.0
10
180
1.2
1.8
Unit
µA
µA
GHz
pF
pF
dB
dB
dB
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft's
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
71400 TS IM TA-2739 No.6579-1/5

1 page




EC3H02C pdf
EC3H02C
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of July, 2000. Specifications and information herein are subject
to change without notice.
PS No.6579-5/5

5 Page










PáginasTotal 5 Páginas
PDF Descargar[ Datasheet EC3H02C.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
EC3H02BVHF to UHF Low-Noise Wide-Band Amplifier ApplicationsSanyo Semicon Device
Sanyo Semicon Device
EC3H02BAVHF to UHF Wide-Band Low-Noise Amplifier ApplicationsSanyo Semicon Device
Sanyo Semicon Device
EC3H02CVHF to UHF Wide-Band Low-Noise Amplifier ApplicationsSanyo Semicon Device
Sanyo Semicon Device

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar