DataSheet.es    


PDF ES1988 Data sheet ( Hoja de datos )

Número de pieza ES1988
Descripción PCI Audio-Modem Accelerator Product Brief
Fabricantes ETC 
Logotipo ETC Logotipo



Hay una vista previa y un enlace de descarga de ES1988 (archivo pdf) en la parte inferior de esta página.


Total 6 Páginas

No Preview Available ! ES1988 Hoja de datos, Descripción, Manual

ESS Technology, Inc.
ES1988 Allegro
PCI Audio-Modem Accelerator
Product Brief
DESCRIPTION
The ES1988 AllegroPCI audio-modem accelerator combines
advanced audio and modem functionality in a highly integrated
PCI solution. Utilizing one PCI load, the ES1988 provides a two-
chip audio-modem solution with digital interface capability to an
AC‘97 codec in the dock (a.k.a. digital docking). The ES1988 is
designed to provide a low-cost, high-performance solution for
notebook PC applications.
The high-bandwidth PCI bus and an integrated high-fidelity
codec are utilized to deliver advanced PC audio features, such
as DirectSoundacceleration and HRTF 3D positional audio.
The ES1988 implements multistream DirectSound and
DirectSound3D acceleration with digital mixing, sample rate
conversion, and HRTF 3D filtering for two-speaker 3D positional
audio.
The programmable audio signal processor provides support for
multiple audio streams. With its built-in DSP core, the ES1988
uses its dedicated direct memory access (DMA) engine to handle
complex signal processing tasks with a bus-mastering PCI
interface. The support functions ensure efficient transfer of audio
data streams to and from system memory buffers, providing a
system solution with maximum performance and minimal host
CPU loading. The architecture enables implementation of
communications over the Internet from multiple sources.
The ES1988 maintains full DOS legacy audio compatibility over
the standard PCI 2.1 and PCI 2.2 bus. Full DOS game
compatibility is ensured through either PC/PCI, distributed DMA
(DDMA), or transparent DMA (TDMA).
The ES1988 includes an HSP modem interface via its secondary
AC-Link connecting with the ES2828 MC‘97 codec. The MC‘97
is used as the analog front end for the modem and DAA control.
The V.90 modem runs on the host while the ES1988 serves as
the bidirectional buffer for data transmission and reception. The
modem functions include the standard AT command set, V.42bis
and Group 3 fax.
The ES1988 provides a high-quality docking solution through
proven AC-link-based digital docking. This is accomplished by
using only a five-wire digital connection. The secondary AC‘97
link (extension 2.1 compliant) of the ES1988 interfaces to a
secondary AC‘97 codec in the dock to provide high-quality audio
in the dock.
The ES1988, which operates at 3.3V digitally and 5.0V in analog,
is compliant with the Advanced Power Management (APM) 1.2,
Advanced Configuration and Power Interface (ACPI) 1.0, and
PCI Power Management Interface (PPMI) 1.0. The ES1988
supports D0, D1, D2, and D3 (hot and cold) power-saving modes
for power efficiency when the audio system is both active and
idle. CLKRUN# support is also available.
The ES1988 is available in an industry-standard 100-pin low-
profile quad flat pack (LQFP) package.
AUDIO FEATURES
High-performance single-chip PCI audio acceleration
Integrated high-fidelity AC‘97 codec
Multistream DirectSound and DirectSound 3D acceleration
Sensaura® CRL positional 3D
High-quality sample rate conversion and digital mixing
Direct music support
Realtime effects processing
S/PDIF output for PCM or AC-3 content
Full legacy DOS game support, using TDMA, PC/PCI, or DDMA
hardware implementation methods
Supports one additional PCI bus master devices
HSP modem interface via MC‘97 link
Digital docking via secondary AC-Link
MODEM FEATURES
Data mode capabilities:
—– V.90 56 kbps
—– V.34 33.6 kbps and fallbacks
—– Standard AT command set
—– V.42 (LAPM) and MNP error correction
—– V.42bis/MNP 5 data compression
—– 3.3V power supply with 5V-tolerant inputs
Fax mode capabilities:
—– ITU-T V.17, V.21 ch2, V.27ter, V.29
—– Group 3 (TIA/EIA 578 Class 1 and Class 2)
Supports wake-on-ring from D3hot and D3cold states
POWER MANAGEMENT
Compliance with APM 1.2, ACPI 1.0, and PPMI 1.1
Compliance with Intel’s Mobile Power Guidelines ‘99
3.3V digital operation with 5V-tolerant inputs
5.0V analog operation
COMPATIBILITY
Supports PC DOS games and applications for Sound Blaster
and SoundBlaster Pro
Meets PC99 /PC2001and WHQL specifications
Compliant with Intel’s audio-modem riser card and mini-PCI
specifications
ESS Technology, Inc.
SAM0368-030601
1

1 page




ES1988 pdf
ES1988 PRODUCT BRIEF
Table 1 ES1988 Pin Descriptions (Continued)
Names
Pin Numbers
I/O
SDI2
GPIO8
I
56
I/O
OSCI
57 I
OSCO
58 O
SRESET2#
GPIO3
O
59
I/O
SDFS2
O
GPIO9
(note)
60 I/O
SCLK2
GPIO10
SDO2
O
61
I/O
O
GPIO11
VAUXD
I/O
62
I
PCGNT#
GT0#
GS0
GPIO12
PC_BEEP
PHONE
CD_L
CD_GND
CD_R
MIC
LINE_IN_L
LINE_IN_R
AVDD[2:1]
AVSS[2:1]
VREF
63
64
65
66
67
68
69
70
71
83, 72
82, 73
74
I
O
O
I/O
I
I
I
I
I
I
I
I
I
I
O
Descriptions
External AC-link serial data input. Select secondary codec by enabling Allegro_Base+38h [5] =
1.
General-purpose input/output.
49.152-MHz crystal input.
49.152-MHz crystal output.
Reset output for AC-Link interface. Select secondary codec by enabling Allegro_Base+38h [5] =
1.
General-purpose input/output.
Serial data frame sync output for AC-Link interface. Select secondary codec by enabling
Allegro_Base+38h [5] = 1.
General-purpose input/output.
If a pull-down resistor is used on this pin, the ES1988 is configured as a multifunction device
(audio-modem). Otherwise, the ES1988 is configured as a single function audio-only device.
Serial clock for AC-link interface. Select secondary codec by enabling Allegro_Base+38h [5] = 1.
General-purpose input/output.
External AC-link serial data output. Select secondary codec by enabling Allegro_Base+38h [5] =
1.
General-purpose input/output.
VAUX detect. During the reset period, the VAUXD pin is driven high to indicate ACPI support in the
D3cold state, and is driven low to indicate ACPI is not supported in the D3cold state. If VAUX is not
supported, then VAUX (pin 55) should be connected to VCC and VAUXD (pin 62) should be pulled
down.
PC/PCI grant input. Enable PC/PCI by setting PCI 50h [10:8] = 010. Select PCGNT# from pin 63
by setting Allegro_Base+58h [6] = 0. Either pin 54 or pin 63 may be used for PCGNT#.
Grant to PCI master. GTO# is enabled by setting PCIx2 arbiter bits PCI 58h [0] = 1 and PCI 58h
[11] = 1. Select GT0#/GSO from pin 63 by enabling PCI 58h [10] = 1. Pin 51 may also be used as
GT0#/GSO.
Grant select 0 output to control external quick switch to grant PCI master phase. GSO is enabled
by setting PCIx2 arbiter bit PCI 58h [0] = 1 and PCI 58h [11] = 0. Select GS0/GT0# from pin 63
by enabling PCI 58h [10] = 1. Pin 51 may also be used as GT0#/GSO.
General-purpose input/output.
PC Speaker input.
Mono input.
CD-audio left channel input.
CD-audio ground input.
CD-audio right channel input.
Microphone input.
Line left channel input.
Line right channel input.
Analog supply voltage, 5V.
Analog ground.
Reference voltage.
ESS Technology, Inc.
SAM0368-030601
5

5 Page










PáginasTotal 6 Páginas
PDF Descargar[ Datasheet ES1988.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
ES1988PCI Audio-Modem Accelerator Product BriefETC
ETC
ES1988SPCI Audio-Modem Accelerator Product BriefETC
ETC

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar