DataSheet.es    


PDF FAN5019 Data sheet ( Hoja de datos )

Número de pieza FAN5019
Descripción 6-Bit VID Controller 2-4 Phase VRM10.X Controller
Fabricantes Fairchild Semiconductor 
Logotipo Fairchild Semiconductor Logotipo



Hay una vista previa y un enlace de descarga de FAN5019 (archivo pdf) en la parte inferior de esta página.


Total 30 Páginas

No Preview Available ! FAN5019 Hoja de datos, Descripción, Manual

www.fairchildsemi.com
FAN5019
6-Bit VID Controller 2-4 Phase VRM10.X Controller
Features
• Pin and Function Backward Compatible with FAN53168
and FAN53180 Controllers
• Precision Multi-Phase DC-DC Core Voltage Regulation
– ±10mV Output Voltage Accuracy Over Temperature
• Differential Remote Voltage Sensing
• Selectable 2, 3, or 4 Phase Operation
• Selectable VRM9 or VRM10 Operation
• Up to 1MHz per Phase Operation (4MHz ripple
Frequency)
• Lossless Inductor Current Sensing for Loadline
Compensation
– External Temperature Compensation
• Accurate Load-Line Programming (Meets Intel®
VRM/VRD10.0 and 10.X CPU Specifications)
• Accurate Channel-Current Balancing for Thermal
Optimization and Layout Compensation
• Convenient 12V Supply Biasing
• 6-bit Voltage Identification (VID) Input
– .8375V to 1.600V in 12.5mV Steps
– Dynamic VID Capability with Fault-Blanking for
glitch-less Output voltage Changes
• Adjustable Over Current Protection with Programmable
Latch-Off Delay. Latch-Off Function may be Disabled
• Over-Voltage Protection – Internal OVP Crowbar
Protection
Applications
• Computer DC/DC Converter VRM/VRD10.0
• Computer DC/DC Converter VRM/VRD10.X
• Computer DC/DC Converter VRM/VRD9.X
• High Current, Low Voltage DC/DC Rail
General Description
The FAN5019 is a multi-phase DC-DC controller for imple-
menting high-current, low-voltage, CPU core power regula-
tion circuits. It is part of a chipset that includes external
MOSFET drivers and power MOSFETS. The FAN5019
drives up to four synchronous-rectified buck channels in par-
allel. The multi-phase buck converter architecture uses inter-
leaved switching to multiply ripple frequency by the number
of phases and reduce input and output ripple currents. Lower
ripple results in fewer components, lower component cost,
reduced power dissipation, and smaller board area.
The FAN5019 features a high bandwidth control loop to
provide optimal response to load transients. The FAN5019
senses current using lossless techniques: Phase current is
measured through each of the output inductors. This current
information is summed, averaged and used to set the loadline
of the output via programmable "droop". The droop is tem-
perature compensated to achieve precise loadline character-
istics over the entire operating range. Additionally,
individual phase current is measured using the RDS(ON) of
the low-side MOSFETs. This information is used to dynam-
ically balance/steer per-phase current. The phase currents
are also summed and averaged for over-current detection.
Dynamic-VID technology allows on-the-fly VID changes
with controlled, glitch-less output. Additionally, short-circuit
protection, adjustable current limiting, over-voltage protec-
tion and power-good circuitry combine to ensure reliable and
safe operation. The operating temperature range is 0°C to
+85°C and the operating voltage is a single +12V supply,
which simplifies the design. The FAN5019 is available in a
TSSOP-28 package.
Block Diagram
VIN
Φ1 FAN5009
Φ2
FAN5019
Φ3
Φ4 FAN5009
VIN
VOUT
REV. 1.0.7 1/5/04

1 page




FAN5019 pdf
PRODUCT SPECIFICATION
FAN5019
Electrical Specifications
(VCC = 12V, TA = 0°C to +85°C and FBRTN=GND, using circuit in Figure 1, unless otherwise noted.)
The denotes specifications which apply over the full operating temperature range.
Parameter
Error Amplifier
Output Voltage Range
Accuracy
Symbol
VCOMP
VFB
Line Regulation
Input Bias Current
FBRTN Current
Output Current
Gain Bandwidth Product
DC Gain
VID Inputs
Input Low Voltage
VFB
IFB
IFBRTN
IO(ERR)
GBW
VIL(VID)
Input High Voltage
VIH(VID)
Input Current, VID Low
Input Current, VID High
Pull-up Resistance
Internal Pull-up Voltage
IIL(VID)
IIH(VID)
RVID
VID Transition Delay Time2
“No CPU” Detection
Turn-off Delay Time2
VID Table Select
Vtblsel
Oscillator
Frequency
Frequency Variation
fOSC
fPHASE
Output Voltage
RAMPADJ Pin Accuracy
VRT
VRAMPADJ
RAMPADJ Input Current
Current Sense Amplifier
Offset Voltage
Input Bias Current
Gain Bandwidth Product
IRAMPADJ
VOS(CSA)
IBIAS(CSA)
GBW
Conditions
Min. Typ. Max. Units
Relative to DAC Setting,
referenced to FBRTN,
CSSUM = CSCOMP,
Test Circuit 3
VCC=10V to 14V
FB forced to VOUT – 3%
COMP = FB
CCOMP = 10pF
VRM10
VRM9
0.5
-10
-12
3.5 V
+10 mV
+12
0.05
-13 -15 -17
150 180
300 500
20
77
%
µA
µA
µA
MHz
dB
VRM10
VRM9
0.4
0.8
VRM10
VRM9
0.8
2.0
VID(X) = 0V
-30 -20
VID(X) = 1.25V
-2
2
Internal
35 60 115
VRM10
VRM9
1.0 1.15 1.26
2.2 2.4 2.6
VID Code Change to FB Change
400
VID Code Change to 11111X to PWM
going low
400
To select VRM9 table
To select VRM10 table (becomes VID5)
4
3.5
V
V
V
V
µA
µA
k
V
V
ns
ns
V
V
TA = +25°C, RT = 250k, 4-Phase
TA = +25°C, RT = 115k, 4-Phase
TA = +25°C, RT = 75k, 4-Phase
RT = 100kto GND
VRAMPADJ = Vdac = +2K • (Vin–Vdac)/
(Rr+2k)
Current into RAMPADJ pin
200
4000 kHz
155 200 245
400
600
kHz
kHz
kHz
1.9 2.0 2.1
V
-50
+50 mV
0 100 µA
CSSUM–CSREF, Test Circuit 1
COMP = FB
-1.5
+1.5 mV
-50
+50 nA
10 MHz
Notes:
1. All limits at operating temperature extremes are guaranteed by design, characterization and statistical quality control
2. Guaranteed by design – NOT tested in production.
REV. 1.0.7 1/5/04
5

5 Page





FAN5019 arduino
PRODUCT SPECIFICATION
FAN5019
Bill of Materials
Table 1. FAN5019 VRM/VRD10 Application Bill of Materials for Figure 1
Ref
U4
U1–3
Q1–3
Q4–9
L1–3
L4
R1
RR RDLY, RT
R5
RPH1–3
RA, RCS2
RB1
RB
RSW1–3
RCS1
RLIM
R19–21
RTH
C1–7
C8–10
C12–14, CCS
CDLY
CB
CA
CFB
CX
CZ
CIN
Qty Description
Manufacturer/Number
1 VRM10, Multi-Phase Controller
Fairchild FAN5019
3 Sync MOSFET Driver, 12V/12V
Fairchild FAN5009
3 N-MOSFET, 30V, 50A, 8m
Fairchild FDD6696
6 N-MOSFET, 30V, 75A, 5m
Fairchild FDD6682
3 Inductor, 650nH, 26A, 1.6m
Micrometals T50-8B/90, 5T, 16AWG
1 Inductor, 630nH, 15A, 1.7m
Inter-Technical AK1418160052A-R63M
1 10, 5%
3 301k, 1%
1 15.0k, 1%
3 100k, 1%
2 24.9k, 1%
1 10, 1%
1 1.33k, 1%
3 0, 5%
1 37.4k, 1%
1 200k, 1%
3 1.5, 5%
1 NTC Thermistor, 100k, 5%
Panasonic ERT-J1V V104J
7 1.0µF, 25V, 10% X7R
3 0.1µF, 50V, 10% X7R
4 4700pF, 25V, 10% X7R
1 0.047µF, 25V, 10% X7R
1 2200pF, 25V, 10% X7R
1 470pF, 50V, 10% X7R
1 100pF, 50V, 5% NPO
8 820µF, 2.5V, 20% 7m, POLY
Fujitsu FP-2R5RE821M
22 10µF, 6.3V, 20% X5R
6 470µF, 16V, 20%, 36m, Alum-Elec Rubycon 16MBZ470M
Note:
The design shown in this datasheet should be used as a reference only. Please contact your Fairchild sales representative
for the latest information.
REV. 1.0.7 1/5/04
11

11 Page







PáginasTotal 30 Páginas
PDF Descargar[ Datasheet FAN5019.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
FAN5018B6-Bit VID Controller 2-4 Phase VR10.X ControllerFairchild Semiconductor
Fairchild Semiconductor
FAN50196-Bit VID Controller 2-4 Phase VRM10.X ControllerFairchild Semiconductor
Fairchild Semiconductor
FAN5019B6-Bit VID Controller 2-4 Phase VR10.X ControllerFairchild Semiconductor
Fairchild Semiconductor
FAN5019MTC6-Bit VID Controller 2-4 Phase VRM10.X ControllerFairchild Semiconductor
Fairchild Semiconductor

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar