DataSheet.es    


PDF F6584 Data sheet ( Hoja de datos )

Número de pieza F6584
Descripción WIDE DYNAMIC RANGE MICROCHANNEL PLATES
Fabricantes Hamamatsu Corporation 
Logotipo Hamamatsu Corporation Logotipo



Hay una vista previa y un enlace de descarga de F6584 (archivo pdf) en la parte inferior de esta página.


Total 2 Páginas

No Preview Available ! F6584 Hoja de datos, Descripción, Manual

WIDE DYNAMIC RANGE
MICROCHANNEL PLATES
F6584 SERIES
20 µA Output Current is Available *
The F6584 series is a wide dynamic range MCP that offers more than ten - fold increase in maximum output current
compared to conventional MCPs. This increased current capability is due to low plate resistance. When operated in pulse
counting mode, the F6584 series MCPs also provide maximum counting capability that is more than ten - fold higher than
conventional MCPs. The design is optimized to prevent resistance reduction resulting from high power consumption or
high temperature operation.
The F6584 series MCPs therefore offer excellent stability and reliability even during high current or high temperature
operations. This results in a very wide dynamic range, making these MCPs ideal for various applications such as mass
spectrometers and usage for high counting PMTs.
FEATURES
q Wide Dynamic Range Typ. 20 µA Maximum Output Current *
q Operable in high temperature condition (+350°C Max. c)
q High Gain and Low Noise
* When the MCP resistance is less than 10 M.
APPLICATIONS
q MS Detector
q GC-MS
q ESCA
q ICP-MS
q LC-MS
q Mössbauer Detector
SPECIFICATIONS
GENERAL
Parameter
Outer Diameter
Effective Diameter
Plate Thickness
Channel Diameter
Channel Pitch
Bias Angle
Open Area Ratio
Electrode Material
F6584-01 F6584-09
24.9
20
0.48 0.43
12 10
15 12
5,15
60
Inconel
Unit
mm
mm
mm
µm
µm
degree
%
Figure 1: Typical Current Gain vs. Supply Voltage
TMCPB0043EA
104
CHARACTERISTICS (at 1000V, 1.3×10 -4 Pa(1×10 -6 Torr), +25°C)
Gain
Plate Resistance
Maximum Dark Current
Maximum Linear Output Signal
More than 10 4
2 to 30
5 × 10 -13
10 to 20% of the strip current a
M
A/cm2
103
MAXIMUM RATINGS (Absolute Values)
Supply Voltage b
Ambient Temperature C
1000
-50 to +350
V
°C
NOTE: a: The strip current is the current flowing through the channel
walls, which supplies the current released from the channel
walls. It is given by : Supply voltage / Plate resistance.
b: At a vacuum of 1.3 × 10 -4 Pa(1 × 10 -6 Torr) or less.
C: Single plate operation
102
500 600 700 800 900 1000 1100
SUPPLY VOLTAGE (V)
Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office.
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.
Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. © 1998 Hamamatsu Photonics K. K.

1 page





PáginasTotal 2 Páginas
PDF Descargar[ Datasheet F6584.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
F6584WIDE DYNAMIC RANGE MICROCHANNEL PLATESHamamatsu Corporation
Hamamatsu Corporation
F6584-01WIDE DYNAMIC RANGE MICROCHANNEL PLATESHamamatsu Corporation
Hamamatsu Corporation
F6584-09WIDE DYNAMIC RANGE MICROCHANNEL PLATESHamamatsu Corporation
Hamamatsu Corporation
F6589ULTRA THIN MCP ASSEMBLY WITH CENTER HOLEHamamatsu Corporation
Hamamatsu Corporation

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar