DataSheet.es    


PDF FL-TMP-025-1 Data sheet ( Hoja de datos )

Número de pieza FL-TMP-025-1
Descripción Non-reflective Terminations (N/ TNC/ SSMA/ POB/ FL/ and PO6)
Fabricantes Hirose Electric 
Logotipo Hirose Electric Logotipo



Hay una vista previa y un enlace de descarga de FL-TMP-025-1 (archivo pdf) en la parte inferior de esta página.


Total 3 Páginas

No Preview Available ! FL-TMP-025-1 Hoja de datos, Descripción, Manual

Non-reflective Terminations (N, TNC, SSMA, POB, FL, and PO6)
N, TNC, POB, FL, PO6, and HRMM-TM Series
sFeatures
1.High Performance
POB-TMP-025 TNC-TMP-1 N-TMP-1-1 N-TMP-3-2
N-TMP-5
FL-TMP-025-1 PO6-TMP-025-1 PO6-TMLP-025 HRMM-601A HRMM-602A
sProduct Specifications
These super wide bandwidth/ultra high matching non-
reflective termination use Hirose Electric original high
frequency matching technology.
2.Full Compliment of Connector Forms
are Available
A wide variety of types are available in addition to the
BNC and SMA (Hirose Electric HRM Series) types.
These include the world standard N, TNC, and SSMA
(Hirose Electric HRMM Series) types, our miniaturized
FL Series, and the PO6 Series with apertures.
Ratings
Frequency range (Note)
Characteristic impedance
Maximum usable power (Note)
DC to 18.0 GHz
50 ohms
0.25 to 5 W
Operating temperature range
Operating relative humidity
Note: The frequency range and the maximum input power will differ depending on the products.
-10ç to +65ç
95% Max.
Item
Standard
Conditions
1.Vibration
2.Shock
No electrical discontinuity of 1 µs or more
No damage, cracks, or parts dislocation
Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm,
acceleration of 98 m/s2 for 2 hours in each of 3 directions
Acceleration of 490 m/s2, sine half-wave waveform,
3 cycles in each of the 3 axis
3.Temperature cycle
No electrical discontinuity of 1 µs or more
qThe test method conforms to MIL-STD-202.
Temperature: -55ç ¡ +5ç to +35ç ¡ +85ç ¡ +5ç to +35ç
Time: 30 ¡ 15 max. ¡ 30 ¡ 15 max. (Minutes)
200 cycles
sMaterials
N Type
Part
Connector Body
Insulator
Male contacts
External contacts
Coupling
Radiator
Resistor
Material
Brass
PTFE
Brass
Phosphor bronze
Brass
Aluminum
Metal film
Finish
Nickel plating
----------
Gold plating
Silver plating
Nickel plating
Black alumite
----------
TNC, POB, FL, and PO6 Types
Part
Material
Finish
Connector Body
Brass
Nickel plating
Insulator
PTFE
----------
Male contacts
Brass
Gold plating
Resistor
Metal film
----------
HRMM Type
Part
Connector Body
Insulator
Male contacts
Female contacts
Outer conductor
Coupling
Resistor
Material
Stainless steel
PTFE
Brass
Beryllium copper
Brass
Stainless steel
Metal film
Finish
Nickel plating
----------
Gold plating
Gold plating
Nickel plating
Passivated
----------
sOrdering Information
N, TNC, POB, FL, and PO6 Types
P06 - TM P - 025 - 1
1 23 4 5
1 Series name
4 Power
2 TM:Indicates a non-reflective termination
3 Connector type
(Example) 025: 0.25 W
1:1W
P: Plug type
J: Jack type
5 Suffix
HRMM Type
HRMM - 601 A
1 23
1 Series Name: HRMM Series
2 600 to 699: Indicates a non-reflective termination
3 Coupling Finish
A: Passivated (without cap)
64

1 page





PáginasTotal 3 Páginas
PDF Descargar[ Datasheet FL-TMP-025-1.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
FL-TMP-025-1Non-reflective Terminations (N/ TNC/ SSMA/ POB/ FL/ and PO6)Hirose Electric
Hirose Electric

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar