DataSheet.es    


PDF FH3-18S-1.25DS Data sheet ( Hoja de datos )

Número de pieza FH3-18S-1.25DS
Descripción 1.25mm Pitch FPC/FFC Connector
Fabricantes Hirose Electric 
Logotipo Hirose Electric Logotipo



Hay una vista previa y un enlace de descarga de FH3-18S-1.25DS (archivo pdf) en la parte inferior de esta página.


Total 4 Páginas

No Preview Available ! FH3-18S-1.25DS Hoja de datos, Descripción, Manual

1.25mm Pitch FPC/FFC Connector
FH3 Series
sFeatures
1. 1.25mm FPC and FFC DIP Connector
The contact pitch is 1.25mm.
2. Contact Reliability
This connector has high contact reliability for high voltage
contact.
3. Sixteen Types of Contact Numbers
This connector consists of 16 kinds of 6, 8, 9, 10, 12, 13, 14,
15, 15, 17, 18, 19, 20, 21, 22, 24, and 30 contacts.
sApplications
HDD, facsimiles, printers, VTR, etc.
sProduct Specifications
Rating
Rated Current: 1A
Operating Temperature Range:-40~+85ç (Note 1) Storage Temperature Range:-10~+60ç (Note 2)
Operating Humidity Range:Relative humidity, 90% max. Storage Humidity Range:Relative humidity, 90% max.
Rated Voltage: 200V AC
(Not dewed)
(Not dewed)
Applicable FPC
t=0.2~0.35 Tin plating
Item
Specification
Condition
1. Insulation Resistance 500Mø min.
Measured at 500V DC
2. Withstand voltage
Neither short or breakdown should occur
500V AC for 1 minute
3. Contact Resistance
20mø max.
π FPC conductor resistance included
Measured at 0.1A
Contact resistance: 40mø max.
4. Mechanical operation
No part should be broken, cracked or loosened
30 cycles
5. Vibration
No part should be broken, cracked or loosened
Frequency: 10~55Hz and full amplitude 1.50mm in 3 directions for 2 hours, respectively
6. Shock
No part should be broken, cracked or loosened
Acceleration: 490m/S2, duration: 11ms, sine half-wave: in 3 directions for 3 times, respectively
7. Moisture Resistance in Steady State Insulation resistance: 50Mø min.
Exposed to temperature 40ç and humidity 90~95% for 96 hours
5 cycles under conditions as follows;
8. Temperature Cycle No part should be broken, cracked or loosened
Temperature: -55ç¡+15~+35¡+85¡+5~+35ç
Time: 30¡5 max.¡ 30¡5 max. for 5 minutes
Note 1. Temperature rise included when energized
Note 2. This storage indicates a long-term storage state for the unused product before board mounted.
The operating temperature and humidity ranges are applied to the non-energized state after the connector has been installed
in the board.
Note 3. The above standards represent this series. The individual formal agreement should be based on the "Specification".
D6

1 page





PáginasTotal 4 Páginas
PDF Descargar[ Datasheet FH3-18S-1.25DS.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
FH3-18S-1.25DS1.25mm Pitch FPC/FFC ConnectorHirose Electric
Hirose Electric
FH3-18S-1.25DSA1.25mm Pitch FPC/FFC ConnectorHirose Electric
Hirose Electric

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar