|
|
PDF FH27-40S-0.4SH Data sheet ( Hoja de datos )
| Número de pieza | FH27-40S-0.4SH | |
| Descripción | 0.4 mm Contact Pitch/ 1.2 mm above the board/ Flexible Printed Circuit ZIF Connectors | |
| Fabricantes | Hirose Electric | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de FH27-40S-0.4SH (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
|
No Preview Available !
NEW
0.4 mm Contact Pitch, 1.2 mm above the board, Flexible Printed Circuit ZIF Connectors
FH 27 Series
qFPC thickness: 0.2±0.03 mm
q1.2 mm Height, actuator fully closed.
(54 pos. shown)
sOverview
Continuous miniaturization of personal mobile devices
created a need for a low profile, high density interconnection
system.In the same time, the demand for higher currents and
higher reliability Flexible Printed Circuits has also increased.
Hirose meets all these challenges with introduction of this connector.
sFeatures
1. Low profile, small PCB mounting area, weight reduction
Protruding only 1.2 mm above the board the connector
occupies 50% less area than comparable type having
contacts spaced on 0.5 mm centers.
Creative design, coupled with high manufacturing capabilities
resulted in extremely low weight of the connector.
2. Higher current carrying capacity
Contact spacing of 0.4 mm allows production of wider
and simpler pattern of conductive traces on FPC.
3. FPC temporary hold and verification of correct insertion
The connector has built-in FPC hold protrusions allowing
the tactile feel of the correct FPC insertion and holding it
in position before closing of the actuator.
4. Uses standard 0.2 mm thick FPC
5. One-finger operation of the actuator
Proven (in several other Hirose's connectors!) Flip-Lock
rotating actuator assures reliable mechanical and electrical
connection with FPC, confirming it with a definite tactile feel.
6. Board placement with automatic equipment
Flat top surface and packaging on the tape-and reel
allows the use of vacuum nozzles.
Standard reel contains 2,500 connectors.
7. Environmental considerations
The center cores of the embossed tape reels are made of Styrofoam.
8. Variety of contact positions
Available with 10, 40, 54, 57 and 60 pos.
sApplications
Mobile phones, PDA’s, digital cameras, digital video
cameras, LCD connections, plasma displays (PDP), camera
modules and other compact devices requiring Flexible
Printed Circuit connections using high reliability ultra-small
profile connectors
24.2mm
qFPC temporary retention
1.2mm
4.0mm
FPC notch
FPC temporary
hold protrusion
Temporary hold-FPC
fully inserted
qWider FPC conductive traces
0.4mm
0.27mm
0.3mm
0.1mm
0.4 mm pitch FPC
Metal fittings on each
side do not protrude
out allowing side-by-
side mounting of the
connectors or closer
component placement.
0.3 mm pitch FPC
Metal
fitting
2004.7
1
1 page  
BRecommended PCB mounting pattern and metal mask dimensions
E
0.4
0.04 R
0.23±0.03(Land)
0.2±0.01(Metal mask)
Recommended metal mask thickness: .t=0.12
R
0.55±0.05
Outline of the connector
F±0.05
(0.175)
(0.225)
0.55±0.05
BRecommended FPC Dimensions
0.8±0.07
0.4±0.03
G±0.05
E±0.03
0.27±0.03
0.13±0.03
0.8±0.07
0.2±0.03
R0.2MAX
2-R0.25MAX
R0.2
(0.07)
H±0.05
G±0.05
Covering film layer
(0.07)
1 Polyamide and thermally hardening adhesive is recommended as the materials for the stiffener.
2 Overlap between covering film layer and stiffener is 0.5mm min.
Unit: mm
Part Number
CL No.
Number of Contacts
E
F
G
H
FH27-10S-0.4SH
CL580-0004-0
10
03.6
05.5
05.2
04.01
FH27-40S-0.4SH
CL580-0005-3
40
15.6
17.5
17.2
16.01
FH27-54S-0.4SH
CL580-0001-2
54
21.2
23.1
22.8
21.61
FH27-57S-0.4SH
CL580-0003-8
57
22.4
24.3
24.0
22.81
FH27-60S-0.4SH
CL580-0006-6
60
23.6
25.5
25.2
24.01
Tape and tape reel packaging (2,500 pieces/reel).
Order by number of reels.
5
5 Page | ||
| Páginas | Total 8 Páginas | |
| PDF Descargar | [ Datasheet FH27-40S-0.4SH.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| FH27-40S-0.4SH | 0.4 mm Contact Pitch/ 1.2 mm above the board/ Flexible Printed Circuit ZIF Connectors | Hirose Electric |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |