DataSheet.es    


PDF FH26-33S-0.3SHW Data sheet ( Hoja de datos )

Número de pieza FH26-33S-0.3SHW
Descripción 0.3mm Contact Pitch/ 1mm above the board/ Flexible Printed Circuit ZIF Connectors
Fabricantes Hirose Electric 
Logotipo Hirose Electric Logotipo



Hay una vista previa y un enlace de descarga de FH26-33S-0.3SHW (archivo pdf) en la parte inferior de esta página.


Total 16 Páginas

No Preview Available ! FH26-33S-0.3SHW Hoja de datos, Descripción, Manual

0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors
FH26 Series
qSpace saving(51 pos. shown)
3.2mm
16.8mm
Metal fittings do no protrude
outside of the connector body
sFeatures
1. Extremely light weight
The typical version, with all 51 contacts loaded, weights
only 0.1 grams.
2. Easy solderability on the PC board
The soldering leads are on 0.6 mm pitch, exiting on front
and back of the connector.
3. Conductive traces on the PCB can run under
the connector
No exposed contacts on the bottom of the connector.
4. Easy FPC insertion and reliable electrical
connection
Proven Flip LockR actuator allows easy insertion of FPC.
Tactile sensation when fully closed confirms complete
electrical and mechanical connection.
5. Accepts standard thickness FPC
0.2mm thick standard Flexible Printed Circuit board can
be used.
This is the only ultra-low profile ZIF connector allowing
the use of standard FPC.
6. Board placement with automatic equipment
Flat top surface and packaging on the tape-and-reel
allows use of vacuum nozzles.
Standard reel contains 5,000 connectors.
qCan be mounted over conductive traces.
No exposed contacts on the bottom
of the connector
qOperation
((11)) AAccttuuaattoorr ooppeenn
((22)) IInnsseerrtt FFPPCC
q
w
FPC
sApplications
Mobile phones, PDA's, digital cameras, digital video
cameras, LCD connections, plasma displays (PDP), camera
modules and other compact devices requiring Flexible
Printed Circuit connections using high reliability ultra-small
profile connectors.
((33)) CClloossee tthhee aaccttuuaattoorr
((44)) FFPPCC ccoonnnneecctteedd
e
r
2004.8
1

1 page




FH26-33S-0.3SHW pdf
BPackaging Specification
qEmbossed Carrier Tape Dimensions (Tape width of 24mm max.)
(1.6)
4±0.1 2±0.15
8±0.1
(0.3)
Unreeling direction
(3.05)
(4.55)
(1.25)
Flat surface, for placement with automatic equipment
Part Number
FH26-13S-0.3SHW
FH26-21S-0.3SHW
FH26-23S-0.3SHW
FH26-25S-0.3SHW
FH26-27S-0.3SHW
FH26-33S-0.3SHW
FH26-35S-0.3SHW
FH26-39S-0.3SHW
FH26-41S-0.3SHW
FH26-45S-0.3SHW
FH26-51S-0.3SHW
5, 000 pieces per reel.
CL No.
CL580-0209-3
CL580-0207-8
CL580-0203-7
CL580-0208-0
CL580-0204-0
CL580-0210-2
CL580-0205-2
CL580-0201-1
CL580-0206-5
CL580-0211-5
CL580-0200-9
Number of Contacts
13
21
23
25
27
33
35
39
41
45
51
G
16
16
16
16
16
24
24
24
24
24
24
qEmbossed Carrier Tape Dimensions (Tape width of 32mm min.)
(1.6)
(0.3)
J
7.5
7.5
7.5
7.5
7.5
11.5
11.5
11.5
11.5
11.5
11.5
All dimensions: mm
KL
5.6 16.5
8.0 16.5
8.6 16.5
9.2 16.5
9.8 16.5
11.6 24.5
12.2 24.5
13.4 24.5
14.0 24.5
15.2 24.5
17.0 24.5
Part Number
FH26-57S-0.3SHW
FH26-71S-0.3SHW
Unreeling direction
(3.05)
(4.55)
1.5
+0.1
0
(1.25)
Flat surface, for placement with automatic equipment
CL No.
CL580-0212-8
CL580-0202-4
Number of Contacts
57
71
G
32
44
All dimensions: mm
HJKL
28.4 14.2 18.8 32.5
40.4 20.2 23.0 44.5
5

5 Page





FH26-33S-0.3SHW arduino
Precautions
3 The actuator will rotate 135 degrees
maximum. Do not apply force to rotate
further.
4 When operating the actuator, do so at the
center portion.
135˚
5 As illustrated, do not attempt removal or re-
positioning of the actuator.
S FPC Insertionq
The FPC should be aligned parallel with the board surface and perpendicular with the connector (as
shown), then completely inserted.
Perpendicular with
the connector
To assure correct electrical and mechanical connection do not insert FPC at angle. It must be fully inserted.
Make sure that the FPC is NOT MOVED during the closing of the actuator.
11

11 Page







PáginasTotal 16 Páginas
PDF Descargar[ Datasheet FH26-33S-0.3SHW.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
FH26-33S-0.3SHW0.3mm Contact Pitch/ 1mm above the board/ Flexible Printed Circuit ZIF ConnectorsHirose Electric
Hirose Electric

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar