|
|
PDF FH18-27S-0.3SHW Data sheet ( Hoja de datos )
| Número de pieza | FH18-27S-0.3SHW | |
| Descripción | Low Profile 0.3mm Pitch Connectors For FPC | |
| Fabricantes | Hirose Electric | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de FH18-27S-0.3SHW (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
|
No Preview Available !
Low Profile 0.3mm Pitch Connectors For FPC
FH18 Series
1.8mm height above
the mounting surface
sFeatures
1. Low profile 0.3mm pitch FPC connectors
In response to continuous miniturization of products, the demand for
smaller contact spacing on connectors is increasing. Flexible printed
circuits(FPC) with contact pitch of 0.3mm are used with increased
frequency. FH18 series connectors fullfill this requirement. In
addition, these connectors occupy less board space and are lighter
than comparable connectors with contacts spaced at 0.5mm.
2. Improved Retention of FPC
Two types of contacts design are combined in the FH18 connector,
zero insertion force(ZIF) and low insertion force(LIF). Inserted FPC is
held in place by the LIF contact, allowing operator to close down the
actuator and engage the ZIF contacts to assure complete connection.
3. Easy to use Flip-Lock Actuator
Flip-lock (rotating type) ZIF mechanism enables good connectivity of
FPC by a simple operation and light force. No board space is required
for flip lock operation as compared to slide lock ZIF connectors.
4. Placement on Board
The leads are on two sides of the connector, spaced on 0.6mm and
are visible for solder joint inspection. Flat top surface of the connector
allows board placement with automated equipment.
5. Variety of Contact Positions
The connectors are available with 17,21,25,27,39,45 and 51 contacts.
LIF terminal contacts
dFiPreCctiinosnertion
FPC
Non – ZIF Contact
Retention of FPC
Connection completed
Actuator closed
sApplications
Notebook computers, printers, PDAs, digital cameras and other
compact devices for interconnecting the main circuit board with the
LCD, PDP (Plasma Display),HDD or other device.
ZIF contact
* LIF : Low insertion Force
* ZIF : Zero insertion Force
47
1 page  
BRecommended Land/ Metal Mask Dimensions
0.3±0.05 (Land)
0.25±0.05 (Metal mask)
B ±0.05
0.6±0.05
0.5 ±0.05
0.3 ±0.05
0.675 ±0.05
*Recommended metal mask thickness: t=0.15
C ±0.05
BRecommended FPC Dimensions
0.6±0.02
0.3±0.07
0.2
E ±0.05
C ±0.03
0.3
+0.04
_0.03
0.6 ±0.05
0.4
+0.04
_0.03
(2- 0.07)
2-R0.2
2
0.2±0.03
0.2
0.05
0.3±0.02
( 0.1)
0.6±0.02
B ±0.03
0.2 (Conductor width)
0.1 (Conductor gap)
0.6±0.07
Note 1 Polyimide and thermal hardening glue are a recommendation for the stiffener.
2
When
drawing
a
plated
lead,
0.3
+0.04
-0.03
is also permitted.
Part Number
FH18-17S-0.3SHW
FH18-21S-0.3SHW
FH18-25S-0.3SHW
FH18-27S-0.3SHW
FH18-39S-0.3SHW
FH18-45S-0.3SHW
FH18-51S-0.3SHW
CL No.
586-0684-5
586-0669-1
586-0685-8
586-0658-5
586-0646-6
586-0694-9
586-0671-3
Number of contacts
17
21
25
27
39
45
51
B
04.2
05.4
06.6
07.2
10.8
12.6
14.4
C
04.8
06.0
07.2
07.8
11.4
13.2
15.0
Unit: mm
E
05.4
06.6
07.8
08.4
12.0
13.8
15.6
51
5 Page | ||
| Páginas | Total 8 Páginas | |
| PDF Descargar | [ Datasheet FH18-27S-0.3SHW.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| FH18-27S-0.3SHW | Low Profile 0.3mm Pitch Connectors For FPC | Hirose Electric |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |