DataSheet.es    


PDF LZ2416J Data sheet ( Hoja de datos )

Número de pieza LZ2416J
Descripción Dual-power-supply (5 V/12 V) Operation 1/4-type B/W CCD Area Sensor with 270 k Pixels
Fabricantes Sharp Electrionic Components 
Logotipo Sharp Electrionic Components Logotipo



Hay una vista previa y un enlace de descarga de LZ2416J (archivo pdf) en la parte inferior de esta página.


Total 12 Páginas

No Preview Available ! LZ2416J Hoja de datos, Descripción, Manual

LZ2416J
LZ2416J
Dual-power-supply (5 V/12 V) Operation
1/4-type B/W CCD Area Sensor with 270 k Pixels
DESCRIPTION
The LZ2416J is a 1/4-type (4.5 mm) solid-state
image sensor that consists of PN photo-diodes and
CCDs (charge-coupled devices) driven by dual-
power-supply . With approximately 270 000 pixels
(542 horizontal x 492 vertical), the sensor provides a
stable high-resolution B/W normal or mirror image.
FEATURES
• Number of effective pixels : 512 (H) x 492 (V)
• Number of optical black pixels
– Horizontal : 2 front and 28 rear
• Pixel pitch : 7.2 µm (H) x 5.6 µm (V)
• Low fixed-pattern noise and lag
• No burn-in and no image distortion
• Blooming suppression structure
• Built-in output amplifier
• Built-in pulse mix circuit
• Variable electronic shutter (1/60 to 1/10 000 s)
• Normal or mirror image output available from
common output pin
• Compatible with EIA standard
• Package :
14-pin half-pitch WDIP [Plastic]
(WDIP014-P-0400A)
Row space : 10.16 mm
PIN CONNECTIONS
14-PIN HALF-PITCH WDIP
ØRS 1
GND 2
OS 3
OD 4
ØH2B 5
ØH2 6
ØH1B 7
TOP VIEW
14 OFD
13 ØTG
12 ØV2
11 ØV1
10 ØV4
9 ØV3
8 ØH1
(WDIP014-P-0400A)
PRECAUTIONS
• The exit pupil position of lens should be more
than 20 mm from the top surface of the CCD.
• Refer to "PRECAUTIONS FOR CCD AREA
SENSORS" for details.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
1

1 page




LZ2416J pdf
PIXEL STRUCTURE
OPTICAL BLACK
(2 PIXELS)
512 (H) x 492 (V)
LZ2416J
OPTICAL BLACK
(28 PIXELS)
1 pin
TIMING CHART
(ODD FIELD)
HD
VD
525 1
VERTICAL TRANSFER TIMING <NORMAL OUTPUT>
10 17 19
ØV1
ØV2
ØV3
ØV4
ØTG
OS
(EVEN FIELD)
HD
VD
484 486 488 490 492
++++
485 487 489 491
263
1 3 5 7 9 11
+++ +++
2 4 6 8 10 12
272 279 282
ØV1
ØV2
ØV3
ØV4
ØTG
OS
4+83 4+85 4+87 4+89 4+91
484 486 488 490 492
+2 +4 +6 +8 1+0
1 3 5 7 9 11
5

5 Page





LZ2416J arduino
PRECAUTIONS FOR CCD AREA SENSORS
1. Package Breakage
In order to prevent the package from being broken,
observe the following instructions :
1) The CCD is a precise optical component and
the package material is ceramic or plastic.
Therefore,
ø Take care not to drop the device when
mounting, handling, or transporting.
ø Avoid giving a shock to the package.
Especially when leads are fixed to the socket
or the circuit board, small shock could break
the package more easily than when the
package isn’t fixed.
2) When applying force for mounting the device or
any other purposes, fix the leads between a
joint and a stand-off, so that no stress will be
given to the jointed part of the lead. In addition,
when applying force, do it at a point below the
stand-off part.
(In the case of ceramic packages)
– The leads of the package are fixed with low
melting point glass, so stress added to a
lead could cause a crack in the low melting
point glass in the jointed part of the lead.
Low melting point glass
Lead
Fixed
Stand-off
PRECAUTIONS FOR CCD AREA SENSORS
(In the case of plastic packages)
– The leads of the package are fixed with
package body (plastic), so stress added to a
lead could cause a crack in the package
body (plastic) in the jointed part of the lead.
Glass cap
Package
Lead
Fixed
Stand-off
3) When mounting the package on the housing,
be sure that the package is not bent.
– If a bent package is forced into place
between a hard plate or the like, the pack-
age may be broken.
4) If any damage or breakage occurs on the sur-
face of the glass cap, its characteristics could
deteriorate.
Therefore,
ø Do not hit the glass cap.
ø Do not give a shock large enough to cause
distortion.
ø Do not scrub or scratch the glass surface.
– Even a soft cloth or applicator, if dry, could
cause dust to scratch the glass.
2. Electrostatic Damage
As compared with general MOS-LSI, CCD has
lower ESD. Therefore, take the following anti-static
measures when handling the CCD :
1) Always discharge static electricity by grounding
the human body and the instrument to be used.
To ground the human body, provide resistance
of about 1 M$ between the human body and
the ground to be on the safe side.
2) When directly handling the device with the
fingers, hold the part without leads and do not
touch any lead.
11

11 Page







PáginasTotal 12 Páginas
PDF Descargar[ Datasheet LZ2416J.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
LZ2416JDual-power-supply (5 V/12 V) Operation 1/4-type B/W CCD Area Sensor with 270 k PixelsSharp Electrionic Components
Sharp Electrionic Components

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar