|
|
PDF LZ0P3641 Data sheet ( Hoja de datos )
| Número de pieza | LZ0P3641 | |
| Descripción | 1/4-type Built-in Lens Color CCD Area Sensors with 350 k Pixels | |
| Fabricantes | Sharp Electrionic Components | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LZ0P3641 (archivo pdf) en la parte inferior de esta página. Total 13 Páginas | ||
|
No Preview Available !
LZ0P3641/3642/3645/3646
LZ0P3641/3642∫/
3645∫/3646
1/4-type Built-in Lens Color CCD
Area Sensors with 350 k Pixels
∫Under development
DESCRIPTION
The LZ0P3641/42∫/45∫/46 are 1/4-type (4.5 mm)
350 000-pixel built-in lens color CCD (charge-
coupled device) area sensors. All pixel signals can
be read independently via the vertical shift register
and horizontal shift register. With their small lens
and WLCC-type flat package, it is possible to make
ultra small color camera easily.
FEATURES
• Progressive scan
• Square pixel
• Compatible with VGA format
• Number of effective pixels : 659 (H) x 494 (V)
• Number of optical black pixels
– Horizontal : 2 front and 31 rear
– Vertical : 8 front and 2 rear
• Number of dummy bits
– Horizontal : 16
– Vertical : 5
• Pixel pitch : 5.6 µm (H) x 5.6 µm (V)
• R, G and B primary color mosaic filters
• Low fixed-pattern noise and lag
• Blooming suppression structure
• Built-in output amplifier
• Built-in overflow drain voltage circuit and reset
gate voltage circuit
• Horizontal shift register clock and reset gate clock
voltage : 3.3 V (TYP.)
• Variable electronic shutter (1/30 to 1/10 000 s)
• Built-in optical low-pass-filter
COMPARISON TABLE
Horizontal viewing angle
F no.
Characteristics
Lens specification
LZ0P3641
50˚
3.4
• Integrated lens :
Horizontal viewing angle
LZ0P3641/46 : 50˚
∫LZ0P3642 : 62˚
∫LZ0P3645 : 115˚
• Package
– 14-pin half-pitch WLCC* type
– Base section size : 12 mm (H) x 11 mm (V)
– Outline dimensions (MAX.) : 18 mm (H) x 11 mm (V)
• Package height : approx. 13 mm (two pcs. of lenses)
* Window Leadless Chip Carrier
PIN CONNECTIONS
14-PIN HALF-PITCH WLCC TYPE TOP VIEW
ØV2 1
ØV1 2
ØV3A 3
ØV3B 4
PW 5
GND 6
OS 7
14 ØH2
13 ØH1
12 ØRS
11 NC
10 OFD
9 GND
8 OD
∫LZ0P3642
62˚
∫LZ0P3645
115˚
2.8
Refer to each following specification.
LZ0P3646
50˚
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
1
1 page  
LZ0P3641/3642/3645/3646
∫Under development
CHARACTERISTICS FOR LZ0P3642∫ (1/30 s progressive scan readout mode)
(TA : +25 ˚C, Operating conditions : The typical values specified in "RECOMMENDED OPERATING CONDITIONS".
Color temperature of light source : 3 200 K)
PARAMETER
Standard output voltage
Saturation output voltage
Sensitivity (Green channel)
Resolution (at center)
Resolution (at corner)
Shading
Difference of center position
Output transistor drain current
SYMBOL
VO
VSAT
R
IOD
MIN.
450
150
250
150
40
TYP.
150
230
300
200
55
4.0
MAX.
±10
8.0
UNIT
mV
mV
mV
TV line
TV line
%
%
mA
NOTE
1
2
3
4
5
6
7
NOTES :
1. The average output voltage of G signal in the central
converted into composite video signals.
area (H/10, V/10) under uniform illumination.
5. The resolution in the peripheral area (image height : Y =
The standard exposure conditions are defined as when
0.8) under the conditions mentioned above.
VO is 150 mV.
6. Defined by the following formula at the brightness of
2. The average output voltage of G signal in the central
standard output voltage : (Vco/Vce) x 100 [%]
area (H/10, V/10) under 10 times exposure of the
Vco : Output voltage at edge of the image (at NTSC
standard exposure conditions.
video output).
3. The average output voltage of G signal in the central
Vce : Output voltage at center of the image (at NTSC
area (H/10, V/10) when a 1 000 lux light source with a
video output).
white board of 90% reflector is imaged.
7. The difference between the center position of image and
4. The resolution in the central area (H/10, V/10) at which
that of the monitor. This is the ratio for the horizontal
the image of the TV resolution chart (ex. EIAJ test chart)
underscanning monitor size which includes the decentering
can be distinguished on the B/W video monitor when
eccentricity when turning the lens head one time.
LENS SPECIFICATION FOR LZ0P3642∫
PARAMETER
Construction
Focal length
F No.
Viewing angle
TV distortion
Focus adjustment range
Torque of focusing
SPECIFICATION
2 pcs. (non-spherical, plastic)
3.0 mm [TYP. : reference]
2.8±5%
H : 62˚, V : 49˚, Diagonal : 74˚ [TYP. : reference]
≤ –1.0%
∞ to 10 cm
0.00005 to 0.001 N·m
NOTE
1
2
3
NOTES :
1. TV distortion is defined by the formula, (∆y/y) x 100 [%]
2. The best focus point of an object can be obtained by
at capturing rectangular pattern sized horizontal by
turning the lens head within this range.
vertical as 4 by 3.
3. Torques which are necessary for turning the lens.
"y" is defined as the vertical height of the center of the
horizontal line.
* Be careful not to remove the lens head by turning it
∆y is defined as the difference between the vertical height
counterclockwise too much when adjusting macro.
of the center of the horizontal line and an edge of it.
∆y
y
5
5 Page 
PACKAGES FOR CCD AND CMOS DEVICES
PACKAGE
14 WLCC TYPE
+0
18–0.2
14±0.1
+0
12–0.1
4-90˚
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Approx.12-13
3.0±0.1
5.0±0.1
,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,
No.1 index
+0
Ø11.0–0.05
+0
Ø12.0–0.05
2.0±0.1
Height 0.5
,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,
11.0±0.05
(Unit : mm)
0.64
1.27
+0
0.8–0.05
,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,
+0
2-C0.2–0.05
No.1 index
,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,
+0
2-Ø0.8–0.05
11±0.05
¿Applicable models¡
LZ0P3611/12/15,
LZ0P3621/22/25,
LZ0P3641/42/45/46
11
11 Page | ||
| Páginas | Total 13 Páginas | |
| PDF Descargar | [ Datasheet LZ0P3641.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LZ0P3641 | 1/4-type Built-in Lens Color CCD Area Sensors with 350 k Pixels | Sharp Electrionic Components |
| LZ0P3642 | 1/4-type Built-in Lens Color CCD Area Sensors with 350 k Pixels | Sharp Electrionic Components |
| LZ0P3645 | 1/4-type Built-in Lens Color CCD Area Sensors with 350 k Pixels | Sharp Electrionic Components |
| LZ0P3646 | 1/4-type Built-in Lens Color CCD Area Sensors with 350 k Pixels | Sharp Electrionic Components |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |