DataSheet.es    


PDF 2SJ74 Data sheet ( Hoja de datos )

Número de pieza 2SJ74
Descripción P CHANNEL JUNCTION TYPE (LOW NOISE AUDIO AMPLIFIER APPLICATIONS)
Fabricantes Toshiba Semiconductor 
Logotipo Toshiba Semiconductor Logotipo



Hay una vista previa y un enlace de descarga de 2SJ74 (archivo pdf) en la parte inferior de esta página.


Total 5 Páginas

No Preview Available ! 2SJ74 Hoja de datos, Descripción, Manual

TOSHIBA Field Effect Transistor Silicon P Channel Junction Type
2SJ74
2SJ74
Low Noise Audio Amplifier Applications
Unit: mm
Recommended for first stages of EQ amplifiers and M.C. head
amplifiers.
High |Yfs|: |Yfs| = 22 mS (typ.)
(VDS = 10 V, VGS = 0, IDSS = 3 mA)
Low noise: En = 0.95 nV/Hz1/2 (typ.)
(VDS = 10 V, ID = 1 mA, f = 1 kHz)
High input impedance: IGSS = 1.0 nA (max) (VGS = 25 V)
Complimentary to 2SK170
Absolute Maximum Ratings (Ta = 25°C)
Characteristics
Symbol
Rating
Unit
Gate-drain voltage
VGDS 25 V
Gate current
IG 10 mA
Drain power dissipation
Junction temperature
PD 400 mW
JEDEC
TO-92
Tj 125 °C
Storage temperature range
Tstg
55~125
°C
JEITA
SC-43
Note: Using continuously under heavy loads (e.g. the application of
TOSHIBA
2-5F1D
high temperature/current/voltage and the significant change in
Weight: 0.21 g (typ.)
temperature, etc.) may cause this product to decrease in the
reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are
within the absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Electrical Characteristics (Ta = 25°C)
Characteristics
Symbol
Test Condition
Gate cut-off current
Gate-drain breakdown voltage
Drain current
Gate-source cut-off voltage
Forward transfer admittance
Input capacitance
Reverse transfer capacitance
Noise figure
IGSS
VGS = 25 V, VDS = 0
V (BR) GDS VDS = 0, IG = 100 μA
IDSS
(Note)
VDS = −10 V, VGS = 0
VGS (OFF)
Yfs
Ciss
VDS = −10 V, ID = −0.1 μA
VDS = −10 V, VGS = 0, f = 1 kHz
VDS = −10 V, VGS = 0, f = 1 MHz
Crss
VDG = −10 V, ID = 0, f = 1 MHz
NF (1)
VDS = −10 V, ID = −1 mA, RG = 1 kΩ,
f = 10 Hz
NG (2)
VDS = −10 V, ID = −1 mA, RG = 1 kΩ,
f = 1 kHz
Note: IDSS classification GR: 2.6~6.5 mA, BL: 6.0~12 mA, V: 10~20 mA
Min Typ. Max Unit
⎯ ⎯ 1.0 nA
25 ⎯ ⎯
V
2.6 ⎯ −20 mA
0.15 2.0 V
8 22 mS
105
pF
32 pF
1.0 10
dB
0.5
2
1 2007-11-01

1 page




2SJ74 pdf
2SJ74
RESTRICTIONS ON PRODUCT USE
Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must
also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document,
the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the “TOSHIBA
Semiconductor Reliability Handbook” and (b) the instructions for the application that Product will be used with or for. Customers are
solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the
appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any
information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other
referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO
LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS.
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
5 2007-11-01

5 Page










PáginasTotal 5 Páginas
PDF Descargar[ Datasheet 2SJ74.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
2SJ72Silicon P-Channel TransistorToshiba Semiconductor
Toshiba Semiconductor
2SJ74P CHANNEL JUNCTION TYPE (LOW NOISE AUDIO AMPLIFIER APPLICATIONS)Toshiba Semiconductor
Toshiba Semiconductor
2SJ76Silicon P-Channel MOS FETHitachi Semiconductor
Hitachi Semiconductor
2SJ76(2SJ76 - 2SJ79) Silicon P-Channel MOS FETRenesas Technology
Renesas Technology

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


www.DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar