DataSheet.es    


PDF AT-1310-J Data sheet ( Hoja de datos )

Número de pieza AT-1310-J
Descripción High Power Fixed Attenuators (Heat sink Mounting Type)
Fabricantes Hirose Electric 
Logotipo Hirose Electric Logotipo



Hay una vista previa y un enlace de descarga de AT-1310-J (archivo pdf) en la parte inferior de esta página.


Total 2 Páginas

No Preview Available ! AT-1310-J Hoja de datos, Descripción, Manual

High Power Fixed Attenuators (Heat sink Mounting Type)
AT-1200 and AT-1300 Series
AT-1210-H J
AT-1320-H J
sFeatures
1.Small Size and Economical
Beryllia is used for the material of the resistance
element to enable the attenuation to be of small
size and low cost.
2.High Power Capacity
Mounting these attenuators to a heat sink permits the
AT-1200 Series to be used at up to 30 W and the AT-
1300 Series to be used at up to 50 W.
3.High Reliability
These attenuators show stable characteristics for
environments of varying temperature, humidity, and
gases.
sProduct Specifications
Ratings
Frequency range (Note)
Characteristic impedance
Maximum Input Power (Note)
DC to 2.0 GHz
50 ohms
30 to 50 W
Operating temperature range
Operating relative humidity
Note: The frequency range and the maximum input power will differ depending on the products.
-10ç to +65ç
95% Max.
Item
1.Vibration
2.Shock
Standard
No electrical discontinuity of 1 µs or more
No damage, cracks, or parts dislocation
3.Temperature cycle No damage, cracks, or parts dislocation
qThe test method conforms to MIL-STD-202.
Conditions
Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm,
acceleration of 98 m/s2 for 2 hours in each of 3 directions
Acceleration of 490 m/s2, sine half-wave waveform,
3 cycles in each of the 3 axis
Temperature: -55ç ¡ +5ç to +35ç ¡ +85ç ¡ +5ç to +35ç
Time: 30 ¡ 15 max. ¡ 30 ¡ 15 max. (Minutes)
200 cycles
sMaterials
Part
Connector Body
Body
Female contacts
Insulation
Attenuation element
Material
Stainless steel
Aluminum
Beryllium copper
PTFE
Metal film
Finish
Passivated
Conductive white alumite
Gold plating
----------
----------
sOrdering Information
AT - 12 10 - H J
1 23
4
1 AT: Indicates a fixed attenuator
2 Indicates the Series Name
(Maximum Usable Power)
12: HRM type plug - jack 30W
13: N type plug - jack 50W
3 Attenuation
10 : 10dB
20 : 20dB
4 Coupling Portion
H J : SMA type jack - jack
N H : N type jack - SMA type jack
88

1 page





PáginasTotal 2 Páginas
PDF Descargar[ Datasheet AT-1310-J.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
AT-1310-HHigh Power Fixed Attenuators (Heat sink Mounting Type)Hirose Electric
Hirose Electric
AT-1310-JHigh Power Fixed Attenuators (Heat sink Mounting Type)Hirose Electric
Hirose Electric

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar